Examination of Cast Iron Material Properties by Means of the Nanoindentation Method

Open access

Abstract

The paper presents results of examination of material parameters of cast iron with structure obtained under rapid resolidification conditions carried out by means of the nanoindentation method.

[1] Mróz, M., Orłowicz, A. & Tupaj, M. (2005). Fatigue of C355 alloy after rapid solidification. Archives of Foundry. 5 (15), 271-277.

[2] Opiekun, Z. (2005). Shaping the structure and mechanical properties of casting alloys, cobalt alloys. Editor Rzeszów University ofTechnology. Rzeszów.

[3] Buytoz, S. & Yildirim, M.M.: (2010). Microstructure and abrasive wear properties of M(Cr,Fe)7C3 carbides reinforced high-chromium carbon coating produced by gas tungsten arc welding (GTAW) process. Archives of Foundry Engineering. 10 (Special Issue 1), 279-286.

[4] Paczkowska, M. (2005). Effect of laser drilling on the structure of the surface layer of ductile cast iron components. Part 2 The structure of the transition zone and quenched. Journal of Researchand Applications in Agricultural Engineering. 50(2), 65-68.

[5] Szykowny, T. & Ciechacki, K. (2006). The structure and hardness of the melted layer GTAW for ductile cast iron. Archives of Foundry. 6, (18), 195-200.

[6] Shevelya, V., Trytek, A. & Sokolan, J.S. (2011). Powierchnostnoje uprocznienie doewtektoidnoj stali pri bystroj kristalizacjii. Problemsof Tribology. 3, 6-12.

[7] Orłowicz, A., Shevelya, V., Trytek, A. & Kirilkov W. (2009). Effect of the concentrated heat flow treatment on the structure and the antiwear properties of cast iron. Archives of Foundry Engineering. 9 (2), 185-188.

[8] ASTM E 2546 - 07 Standard Practice for Instrumented Indentation Testing.

[9] PN-EN ISO 14577-1 (2005): Metals. Instrumental attempt to push the indenter for determining the hardness of the other property of materials. Part 1: Test method.

[10] Oliver, W.C. & Pharr G.M. (1992). An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal MaterialsResearch. 7 (6), 1564-1583.

[11] Stranyanek, M, Ctvrtlik, R., Bohac, P., Jastrabik, L. & Kulikovsky V. (2005). Nanomechanicke vlasnosti uhlikovych vrstev mereng pristrojem NT600. Jemna Mechanika a Optika. 50 (7-8), 214-217.

[12] Sob, M., Legut, D., Friak, M., Fiala, J., Vitek, V. & Hafnem J. (2002). Nanoindentation and theoretical strength in metals and intermetallics. National Conference NANO`02, November 19-21 2002 Brno, 146-149.

[13] Blahova, O., Skalova, J., Houdkova, S. Zkoumani materialu nanoindentacni metodou. National Conference NANO`02, pp.138-141, November 19-21 2002 Brno.

[14] Kot, M. & Rakowski W. (2005). Influence of surface roughness and hardness of the substrate on the hardness measurement of thin films. Machine Operation Issues. Issues Friction and LubricationConsumption. 40 (2), 17-30.

[15] Sneddon I.N. (1972). The transmission of force between two halfplanes. Journal of Elasticity. 2 (4), 283-295.

[16] Hintermann, H.E. (1993). Characterization of surface coatings by the scratch adhesion test and by indentation measurements. AnalyticalChemistry. 346, 45-52.

[17] Blahova, O., Skalova, J., Houdkova, S. (2002). Zkoumani materialu nanoindentacni metodou. NANO`02 Brno University of Technology, 19-21.11.2002, 138-141.

[18] Sob, M., Legut, D., Friak, M., Fiala, J., Vitek, V. & Hafner J. (2002). Nanoindentacion and theoretical strength in metals and intermetallics. NANO`02 Brno University of Technology, 19-21.11.2002, 146-149.

[19] Novak, M. & Stepanek I. (2008). Porovnani systemu tenka vrstva - substrat s velice rozdilnou odolnosti pri indentacnich zkouskach. Metal 2008, 13-15.05.2008 Hradec nad Moravici, Czech Republic

[20] Novak, M. & Stepanek I. (2008). Studium mechanickeho chovani rozdilnych systemu tenka vrstva - sklo pomoci indentacnich zkousek. Metal 2008, 13-15.05.2008 Hradec nad Moravici, Czech Republic.

[21] Orłowicz, A. & Trytek A. (2007). Formation of the microstructure and performance of cast iron surface-enriched plasma arc. Archivesof Foundry. 7 (23), 1-120.

[22] Orłowicz, W. & Trytek A. (2003). Effect of rapid solidification on sliding wear of iron castings. Wear 254, 154-163.

[23] Orłowicz, W. & Trytek A. (2003). Structural and operating aspects of rapid solidification of surface layer of spheroidal graphite iron castings. International Journal of Cast Metals Research. 16 (5).

[24] Orłowicz, W. & Trytek A. (2003). Susceptibility of iron castings to heat absorption from electric arc and to hardened-layer shaping. Metallurgical and Materials Transactions. 34A, 2973-2984.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 168 164 10
PDF Downloads 60 59 2