The Properties of Moulding Sand with Halloysite

Open access

The Properties of Moulding Sand with Halloysite

Until now, the mould sand in general use in the foundry industry are based on bentonite, which resulted from the fact that a good recognition properties and phenomena associated with this material. Come to know and normalized content of montmorillonite and carbonates and their important role in the construction of bentonite, and mass properties of the participation of compressive strength or scatter. Halloysite is widely used in industry and beyond them. However, little is known about its use in the foundry in Poland and abroad. This article presents preliminary research conducted at the Foundry Department of Silesian University of Technology on this material. Will raise the question of the representation of this two materials, which contains information connected with history and formation of materials, their structure and chemical composition. In the research, the results of compressive strength tests in wet masses of quartz matrix, where as a binder is used halloysite and bentonite in different proportions.

Samsonowicz Z. (1986). Automation of foundry processes, Engineer Handbook, Warsaw: Science-Technology Publisher.

Dańko J., Fedoryszyn, A. (-). Analysis of automatic snap-flask forming mould. Retrieved May 2, 2012, from http://www.kmasz.odlew.agh.edu.pl

Sakwa W., Wachelko T. (1970). Theory and practice of moulding materials technology. Katowice: Silesia Publisher.

Tołkanowicz E. (-). Bentonite and bentonite clay. Retrieved May 2, 2012, from http://surowce-mineralne.pgi.gov.pl

Cholewa M., Szuter T. (2011). Model research about interactions on border microspheres-bentonite. Structural Polymers and Composites 2011 (pp. 105-112). Gliwice: Silesian University of Technology Publisher.

Janiak K. (2005). Modification of silicate layered (bentonite) using adhesion promoters and strengthening. Unpublished Master's dissertation, Adam Mickiewicz University, Poznań, Poland.

Kowalski, J. S. (2011). Technological aspects of displacive transformation of synthetic quartz matrix moulding sand with bentonite. Cracow: Cracow University of Technology Publisher.

ZGM Zębiec S. A. (-). Bentonite. Retrieved April 30, 2012 from http://www.zebiec.pl

Milutinović-Nikolić A., Dostanić J., Bankowić P., Jović-Jovičić N., Lukić S., Rosić B., Jovanović D. (2010). A new type of bentonite-based non-woven composite. Journal of the Serbian Chemical Society. 76 (10), 1411-1425.

Vasková I., Fecko D., Malik J., Futáš P. (2010). Physical and chemical clay binder characteristics from various locality andtheir influence on some technological properties of bentonite mouling mixtures. Archives of Foundry Engineering. 10, 211-216.

Żymankowska-Kumon S., Holtzer M., Grabowski G. (2011). Thermal analysis of foundry bentonites. Archives of Foundry Engineering. 11, 209-213.

Menezes R. R., Souto P. M., Santana L. N. L., Neves G. A., Kiminami R. H. G. A., Ferreira H. C. (2009). Bentonite clay from Cubati, Paraíba, Brazil: Physical and mineralogical characterization. Ceramica. 55 (334), 163-169.

Lvov Y. M., Shchukin D. G., Mohwald H., Price R. R. (2008). Halloysite Clay Nanotubes for Controlled Release of Protective Agents. (pp. 814-820). ACSNANO.

Intermark. (2012). Gallery - Halloysite. Retrieved May 2, 2012, from http://www.intermark.pl

Matusik J. (2010). Minerals of the kaolinite group as a precursors of mineral nanotubes. Unpublished doctoral dissertation, AGH University of Science and Technology, Poland.

AGH University of Science and Technology. (2006/07). Silty minerals. Retrieved May 1, 2012 from http://zasoby1.open.agh.edu.pl

Merta H., Stechman M. (2003). Investigation of the sorptive and sedimentation properties of halloysite. Chemical engineering and apparatus. 1, 23-24.

Wilson I. R. (2004). Kaolin and halloysite deposits of China. Clay Minerals. 39, 1-15.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 98 97 6
PDF Downloads 37 37 4