Microstructure and Mechanical Properties of ADI Depending on Austenitization Methods and Parameters

Open access

Microstructure and Mechanical Properties of ADI Depending on Austenitization Methods and Parameters

Ductile iron was quenched using two-variant isothermal transformation. The first treatment variant consisted of one-phase austenitization at a temperature tγ = 830, 860 or 900°C, cooling down to an isothermal transformation temperature of 300 or 400°C and holding from 8 to 64 minutes. The second treatment variant consisted of two-phase austenitization. Cast iron was austenitizied at a temperature tγ = 950°C and cooled down to a supercritical temperature tγ', = 900, 860 or 830°C. Isothermal transformation was conducted under the same conditions as those applied to the first variant. Ferrite cast iron was quenched isothermally. Basic strength (Rp0.2, Rm) and plastic (A5) properties as well as matrix microstructure and hardness were examined.

As a result of heat treatment, the following ADI grades were obtained: EN-GJS-800-8, EN-GJS-1200-2 and EN-GJS-1400-1 in accordance with PN-EN 1564:2000 having plasticity of 1.5÷4 times more than minimum requirements specified in the standard.

Pietrowski S. (1997). Nodular cast iron of bainitic ferrite structure with austenite or bainitic structure. Archives of Materials Science. 18 (4), 253-273 (in Polish).

Guzik S. E. (2003). Austempered cast iron as a modern constructional material. Inżynieria Materiałowa. 6, 677-680 (in Polish).

Dymski S. (1999). Formation of the microstructure and the mechanical properties of ductile cast iron during ishotermal bainitic transformation. Dissertations no. 95, Section of publishing houses ATR Bydgoszcz, (in Polish).

Kovacs B. V. (1994). On the Terminology and Structure of ADI. AFS Transactions. 102, 417-420.

Dymski S., Ławrynowicz Z., Giętka T. (2006). Impact strength of ADI. Archives of Foundry. 6 (21), 369-376.

Kilicli V., Erdogan M. (2008). The Strain-Hardening Behavior of Partially Austenitized and the Austempered Ductile Irons with Dual Matrix Structures. Journal of materials Engineering and Performance. 17 (2), 240-249.

Delia M., Alaalam M., Grech M. (1998). Effect of Austenitizing Conditions on the Impact Properties of an Alloyed Austempered. Ductile Iron of Initally Ferritic Matrix Structure. 7 (2), 265-272.

Grech M., Young J. M. (1990). Effect of austenitising temperature on tensile properties of Cu-Ni austempered ductie iron. Materials Science and Technology. 6, 415-421.

Mallia J., Grech M. (1997). Efect of silicon content on impact properties of austempered ductile iron. Materials Science and Technology. 13, 408-414.

Ogi K., Sawamoto A., Jin Y. C., LoperJr. C. R. (1988). A study of Some Aspects of the Austenitization Process of Spheroidal Graphite Cast Iron. AFS Transactions. 96, 75-81.

Aranzabal J., Gutierrez I., Rodriguez-Ibabe J. M., Urcola J. J. (1997). Influence of the Amount and Morphology of Retained Austenite on the Mechanical Properties of an Austempered Ductile Iron. Metallurgical and Materials Transactions. 28A, 1143-1156.

Eric O. at al. (2006). The austempering study of alloyed ductile iron. Materials 27, 17-622.

Chang L. C. (1998). Carbon content of austenite in austempered ductile iron. Scripta Materialia. 39 (1), 35-38.

Ławrynowicz Z., Dymski S. (2006). Mechanism of bainite transformation in ductile iron ADI. Archives of Foundry Engineering. 6 (19), 171-176.

Szykowny T. (2005). Isothermal eutectoidal transformation in ductile cast iron EN-GJS-500-7. Archives of Foundry. 5 (17), 303-312.

Dymski S., Giętka T. (2008). Influence of gradual austenitizing on chosen properties of ADI. Archives of Foundry Engineering. 8 (3), 185-190.

Giętka T., Dymski S. (2009). Predicting ADI mechanical properties. Archives of Foundry Engineering. 9 (3), 267-274

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information

CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Cited By


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 172 170 11
PDF Downloads 60 59 6