Archives of Electrical Engineering

The Journal of Polish Academy of Sciences

Open access

ARCHIVES OF ELECTRICAL ENGINEERING (AEE) (previously Archiwum Elektrotechniki), quarterly journal of the Polish Academy of Sciences is OpenAccess (DE GRUYTER OPEN), publishing original scientific articles and short communiques from all branches of Electrical Power Engineering exclusively in English. The main fields of interest are related to the theory & engineering of the components of an electrical power system: switching devices, arresters, reactors, conductors, etc. together with basic questions of their insulation, ampacity, switching capability etc.; electrical machines and transformers; modelling & calculation of circuits; electrical & magnetic fields problems; electromagnetic compatibility; control problems; power electronics; electrical power engineering; nondestructive testing & nondestructive evaluation.

All published papers are revised.

The journal does not have article processing charges (APCs) nor article submission charges.

The journal publishes original papers in the field of electrical engineering which covers, but not limited to, the following scope:

  • Control
    Optimal. Robust and Adaptive Controls. Non Linear and Stochastic Controls. Modeling and Identification. Robotics. Image Based Control. Hybrid and Switching Control. Process Optimization and Scheduling. Control and Intelligent Systems. Artificial Intelligent and Expert System. Fuzzy Logic and Neural Network. Complex Adaptive Systems.
  • Electrical machines and transformers
    Theory of electromechanical energy conversion. Modelling of electrical machines and transformers in electrical systems. Steady state and transients problem. Forces and losses. High voltage phenomena during exploitation. Novelty in construction and computer aided design.
  • Electrical & magnetic fields problems
    Mathematical models and associated discretization methods - formulations for electromagnetic modelling in various regimes. Efficient numerical techniques: finite element, finite difference and integral methods. Fast solvers for electromagnetic applications, parallel computing. Visualization and post-processing. Coupled problems. Material modeling. Inverse problems: design, optimization and sensitivity analysis. Applications: electrical machines and devices, power systems and energy storage, power electronic components, electromagnetic compatibility, antennas, microelectromechanical systems (MEMS). Nano devices. Bioelectromagnetism.
  • Electric traction
    Electric Traction Systems. AC and DC Traction Power Supply. Electric and Hybrid Vehicles. Traction Drives Traction Substations. Catenary. Energy Consumption by Transport Systems. Automatic and Control of Electrified Transport Systems. EMC in Electrified Transport.
  • Electro heat
    Electro heat deals with the useful electric energy transfer into heat in many practical applications for instance in metallurgy, foundry, heat treatment, chemistry, electromagnetic processing of materials, heating and as well in medicine. Main research topics are mainly connected with modeling of coupled physical fields in order to recognize phenomena. Optimize technology and improve automation methods of electrothermal processes.
  • Fuel cells, micro machines, hybrid vehicles
    Fuel cells. Chemical sources of energy. Storage cells. Micro-cells. Linear induction motors. Micro machines. Hybrid vehicles. Electromedicine problems. New light sources. Electrical metrology. Measuring transducers.
  • Nondestructive testing & Nondestructive evaluation
    Scientific research of the properties of materials and devices. Detection of inhomogeneities in materials and devices, such as inclusions of foreign material, the base material defects, cracks, stress, and hardening the state of magnetization. Various measurement techniques. Signal and image processing and decision-making methods.
  • Electrical power engineering
    Electric Power Generation. Transmission and Distribution. Power Electronics. Power Quality. Power Economic. FACTS. Renewable Energy. Electric Traction. Electromagnetic Compatibility. Electrical Engineering Materials. High Voltage Insulation Technologies. High Voltage Apparatuses. Lightning Detection and Protection. Power System Analysis. SCADA. Electrical Measurements.
  • Power electronics
    Applications of power semiconductor technology: devices, techniques and performance management. Circuits and topologies. AC/AC, DC/DC converters. DC/AC, AC/DC inverters. Resonant converters. High-frequency power magnetics. Switched capacitor circuits. Electromagnetic interference. Power electronics in DC and AC drives. Power electronics in Power quality. Filtering. Renewable-energy systems. "Smart grid". Energy storage systems. Emerging technologies in power conversion. Simulations of power electronic systems. Circuit theory applications to power electronics. Advanced modeling and control methods.

Rejection Rate

20%

Abstracting & Indexing

Archives of Electrical Engineering is covered by the following services:

  • Arianta
  • Baidu Scholar
  • BazTech
  • Clarivate Analytics - Emerging Sources Citation Index
  • Clarivate Analytics - Web of Science
  • CNKI Scholar (China National Knowledge Infrastructure)
  • CNPIEC
  • Dimensions
  • DOAJ (Directory of Open Access Journals)
  • EBSCO (relevant databases)
  • EBSCO Discovery Service
  • Elsevier - Compendex
  • Elsevier - Engineering Village
  • Elsevier - Reaxys
  • Elsevier - SCOPUS
  • Genamics JournalSeek
  • Google Scholar
  • Inspec
  • Japan Science and Technology Agency (JST)
  • J-Gate
  • JournalGuide
  • JournalTOCs
  • KESLI-NDSL (Korean National Discovery for Science Leaders)
  • Microsoft Academic
  • Naviga (Softweco)
  • POL-index
  • Primo Central (ExLibris)
  • ProQuest (relevant databases)
  • Publons
  • ReadCube
  • SCImago (SJR)
  • Sherpa/RoMEO
  • Summon (Serials Solutions/ProQuest)
  • TDNet
  • TEMA Technik und Management
  • Ulrich's Periodicals Directory/ulrichsweb
  • WanFang Data
  • WorldCat (OCLC)

Editor-in-Chief
Professor Andrzej Demenko, Poznan University of Technology, Poland

Deputy/ Managing Editor
Mariusz Barański, Ph.D., Poznan University of Technology, Poland
Łukasz Knypiński, Ph.D., Poznan University of Technology, Poland

Advisory Editorial Board
Marian P. Kaźmierkowski, Warszawa, Poland (Chairman)
Grzegorz Benysek, Zielona Góra, Poland (Secretary)

Members Professors:
Antero Arkkio, Helsinki, Finland
Frede Blaabjerg, Aalborg, Denmark
Ion Boldea, Timisoara, Romania
Stanisław Bolkowski, Warszawa, Poland
Herbert De Gersem, Darmstadt, Germany
Jacek Gieras, Rockford, USA
Kay Hameyer, Aachen, Germany
Mieczysław Hering, Warszawa, Poland
Marian K. Kazimierczuk, Dayton, USA
Stefan Kulig, Dortmund, Germany
David A. Lowther, Montreal, Canada
Jacek Marecki, Gdańsk, Poland
José Rodríguez Pérez, Valparaíso, Chile
Yurij Gevodovich Shakarian, Moscow, Russia
Ryszard Sikora, Szczecin, Poland
Zbigniew Styczyński, Magdeburg, Germany
Jan Sykulski, Southampton, UK

Technical Editor
Ewa Rozmiarek,
Scientific Publishers OWN, Institute of Bioorganic Chemistry Polish Academy of Sciences, Poland

Statistical Editor
Mariusz Barański, Poznan, Poland
Poznan University of Technology

Language Editor
Krystyna Guzek

Theme Editors:
Mieczysław Hering, Warszawa, Poland
Professor at Warsaw University of Technology

Zbigniew Lubosny, Gdansk, Poland
Professor at Gdańnk University of Technology

Marian Łukaniszyn, Opole, Poland
Professor at Opole University of Technology

Marian Pasko, Gliwice, Poland
Professor at Silesian University of Technology

Stanisław Piróg, Krakow, Poland
Professor at AGH University of Science and Technology

Danuta Stryczewska, Lublin, Poland
Professor at Lublin University of Technology

Jan Sykulski, Southampton, UK
Professor at University of Southampton

Adam Szelag, Warsaw, Poland
Professor at Warsaw University of Technology

Romulad Włodek, Krakow, Poland
Professor at AGH University of Science and Technology

Contact
Address of the Editorial Office:

Archives of Electrical Engineering
Piotrowo 3A (Room 612X)
60-965 Poznan, Poland
tel: (48-61) 665-26-36
fax: (48-61) 665-23-81
e-mail: aee@put.poznan.pl

Website: www.aee.put.poznan.pl

Publisher
DE GRUYTER OPEN
Bogumiła Zuga 32A Str.
01-811 Warsaw, Poland

ARCHIVES OF ELECTRICAL ENGINEERING (AEE) (previously Archiwum Elektrotechniki), quarterly journal of the Polish Academy of Sciences is OpenAccess (DE GRUYTER OPEN), publishing original scientific articles and short communiques from all branches of Electrical Power Engineering exclusively in English.

All published papers are revised.

All manuscripts should be submitted electronically on Editorial System.

The main fields of interest are related to:

  • theory & engineering of the components of electrical power system: switching devices, reactors, etc. together with basic questions of their insulation, ampacity, switching capability etc.,
  • electrical machines and transformers,
  • modelling & calculation of circuits,
  • electrical & magnetic fields problems,
  • electromagnetic compability,
  • control problems,
  • power electronics,
  • electrical power engineering
  • nondestructive testing & nondestructive evaluation.

Technical Details

All authors should have participated sufficiently in the work to take responsibility for the content, either all of the work or an important part of it. Each author must be able to defend the content (all or important part) and conclusion of the article if publicly challenged. Sufficient participation means that substantial contributions have been made in each of the following areas:

  1. Conception and design, or acquisition of data, or analysis and interpretation of data
  2. Drafting the manuscript or revising it critically for important content, and
  3. Approval of the version of the submitted manuscript.

The reviewing process:

Each paper submitted for publication in Archives of Electrical Engineering is subjected to the following review procedure:
a) the paper is reviewed by the editor in chief or guest editor for general suitability for publication in AEE
b) if it is judged suitable two reviewers are selected and a double blind peer review process takes place
c) based on the recommendations of the reviewers, the editor then decides whether the paper should be accepted in its present form, revised or rejected
d) the author(s) is(are) informed by e-mail on the results of the reviewing procedure.
The papers are published on average within 3 months after acceptance.

Requirements for preparation of manuscripts:

The manuscripts submitted for publication should not exceed 30 000 characters (ca. 12 pages of a manuscript written on an A4 sheet in Times New Roman, 10pt font size, single line spacing and 4 cm margins). The manuscripts, written in UK English, should be typed using Template AEE according to the following instructions and should include: a title page with the title of a manuscript, a short title; abstract; key words, text; list of references. A DOI number as well as received and revised data will be completed by Editor. When you open Template.doc, select "Print Layout" from the "View" menu in the menu bar (View > Print Layout). Then type over sections of Template.doc or cut and paste from another document and then use markup styles (Home > Styles). For example, the style at this point in the document is "main text").
All papers submitted for publication are assessed on the basis of the mutual anonymity rule as to the names of reviewers and authors. Authors' names and affiliations should not appear in the attached text/tables/figures.
If English is not your first language, ask an English-speaking colleague to proofread your manuscript. The manuscripts that fail to meet basic standards of literacy are likely to be immediately declined or after the language assessment, sent to the authors for linguistic improvement.
The manuscripts are published on average within 3 months after their acceptance.
Do not change the font sizes or line spacing to squeeze more text into a limited number of pages. Leave some open space around your figures.
Template.pdf is available in Supplementary Information section.

Text:

The pages must be numbered consecutively. Articles should be divided into numbered sections, and if necessary subsections, preferably: Introduction, Material, Methods, Results, Conclusion and References. Any special characters (e.g. Greek, script, etc.) should be named in the margin where the character first occurs in the text. Names of species are to be accentuated with wavy underlining (italics). Equations should be numbered serially (1), (2), ... on the right side of the page. Footnotes should be avoided, if required, they should be used only for brief notes which do not fit well into the text. Figures and tables have to be included into the text. If table is typed on a separate page its position in the text should be marked. Abbreviations should be explained when they first appear in the text.

Math:

Please use the Microsoft Equation 3.0 editor (comes with Microsoft Office 2007 and later versions) to build an equation in your paper.
To insert an equation in Word, choose Insert, then Object. This will bring up a dropdown menu, where the Object option should be chosen again. Pressing it opens a popup window, where the Create New option has to be clicked. Scrolling down the window allows to find Microsoft Equation 3.0.
Please note that the MathML editor as well as MathType editor is not recommended for typing equations.

Equations:

Equations should be typed within the text, centred, and should be numbered consecutively throughout the text. Their numbers should be typed in parentheses, flush right. Equations should be referred to in text, e.g. (1), except at the beginning of a sentence: "Equation (1) is ...". All symbols appearing in equations have to be defined in the text, before or just after the equation.
If the symbols are written in Times New Roman use italic fonts. Symbols of vectors and matrices should be written in bold fonts. Do not italicize Greek fonts and mathematical symbols like e.g.: the derivative symbol d, max, min, etc. The indices of symbols that are indices themselves should be written in a clear manner.
Note that the equation is centered using a center tab stop. Please keep the same font in the formulas and text.

Unit Symbols, Abbreviations:

Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.
Si units are recommended for use in formulas, drawings and tables., for example the SI unit for magnetic field strength H is A/m. Apply the center dot to separate compound units.
Do not mix complete spellings and abbreviations of units: "Wb/m2" or "webers per square meter," not "webers/m2." Spell units when they appear in text: "...a few henries…", not "...a few H…".
Use a zero before decimal points: "0.25," not ".25." Use "cm3," not "cc."

Tables, figures (illustrations) and captions:

The illustrations (line diagrams and photographs) should be suitable for direct reproduction. The lettering as well the details should have proportional dimensions to maintain their legibility after the usual reduction. All illustrations should be numbered consecutively (Fig. X). Tables are numbered with Arabic numerals.
All figures, figure captions, and tables in the text must be inserted into the correct places.
Figures, photos, tables or other parts of a manuscript that have previously appeared in another publication or are not the property of the authors must be properly acknowledged in the manuscript. Permission to republish these items must be obtained by the corresponding author from a person or institution holding the copyright, usually the publisher.
Authors are requested to send figures (diagrams, line drawings and photographic images) in separate computer files. JPG, PNG or TIF are the recommended file formats. Photographs, colour and greyscale figures should be at least at a resolution of 400dpi. Linear, including tables should be at a minimum of 600dpi.
All colour figures should be generated in the RGB or CMYK colour space, while greyscale images in the greyscale colour space.
When preparing your figures/graphics etc., we suggest the use of the Arial 8 point font for axis numbers and Arial 9 point font for axis names. Figures/graphics etc. can be prepared in one of two proposed ways - see Template AEE.
Tables are numbered with Arabic numerals. Use 9 point Times New Roman for the title of the table and 9 point Times New Roman for the filling of the table (9 in the case of symbols with subscripts).
AEE journal allows an author to publish color figures in e-version at no charge, and automatically convert them to grayscale for print versions. Authors wishing to use the facility of color printing should consult the editors.

Conclusions:

A conclusion might elaborate on the importance of the work or suggest applications and extensions. Although a conclusion may review the main points of the manuscript, do not replicate the abstract as the conclusion.

References:

References in text must be numbered consecutively by Arabic numerals placed in square brackets. Please make sure that you use full names of journals i.e. Archives of Electrical Engineering. Please ensure that all references in the Reference list are cited in the text and vice versa.
Please provide name(s) and initials of author(s), the title of the manuscript, editors (if any), the title of the journal or book, a volume number, the page range, and finally the year of publication in brackets.

Examples of the ways in which references should be cited are given below:

Journal manuscript
[1] Author1 A., Author2 A., Title of paper, Title of periodical, vol. x, no. x, pp: xxx-xxx (YEAR).
example
[1] Steentjes S., von Pfingsten G., Hombitzer M., Hameyer K., Iron-loss model with consideration of minor loops applied to FE-simulations of electrical machines, IEEE Transaction on Magnetics. vol. 49, no. 7, pp: 39453948 (2013).
[2] Idziak P., Computer Investigation of Diagnostic Signals in Dynamic Torque of Damaged Induction Motor, Electrical Review (in Polish), to be published.
[3] Cardwell W., Finite element analysis of transient electromagnetic-thermal phenomena in a squirrel cage motor, submitted for publication in IEEE Transactions on Magnetics.

Conference manuscript
[4] Author A., Title of conference paper, Unabbreviated Name of Conf., City of Conf., Country of Conf., pp: xxx-xxx (YEAR).
example
[4] Popescu M., Staton D. A., Thermal aspects in power traction motors with permanent magnets, Proceedings of XXIII Symposium Electromagnetic Phenomena in Nonlinear Circuits, Pilsen, Czech Republic, pp: 3536 (2016).

Book, book chapter and manual
[5] Author1 A., Author2 A. B., Title of book, Name of the publisher (YEAR).
example
[5] Zienkiewicz O., Taylor R. L., Finite Element method, McGraw-Hill Book Company (2000).

Patent
[6] Author1 A., Author2 A., Title of patent, European Patent, EP-xxx-xxx (YEAR).
example
[6] Piech Z., Szelag W., Elevator brake with magneto-rheological fluid, European Patent, EP 2 197 774 B1 (2011).

Thesis
[7] Author A., Title of thesis, PhD Thesis, Department, University, City of Univ. (YEAR).
example
[7] Driesen J., Coupled electromagnetic-thermal problems in electrical energy transducers, PhD Thesis, Faculty of Applied Science, K.U. Leuven, Leuven (2000).

For on electronic forms
[8] Author A., Title of article, in [Title of Conference, record as it appears on the copyright page], [copyright year] © [applicable copyright holder of the Conference Record]. doi: [DOI number].
example
[8] Kubo M., Yamamoto Y., Kondo T., Rajashekara K., Zhu B., Zero-sequence current suppression for open-end winding induction motor drive with resonant controller, in IEEE Applied Power Electronics Conference and Exposition (APEC), © APEC, 2016, doi: 10.1109/APEC.2016.7468259

Website
[9] http://www.aee.put.poznan.pl, accessed April 2010.

LICENSE TO PUBLISH FORM
The authors are asked to submit a completed License to publish. Assignment of License Form is available in http://aee.put.poznan.pl/Notes%20for%20Authors.htm

Journal Information


CiteScore 2016: 0.71

SCImago Journal Rank (SJR) 2016: 0.238
Source Normalized Impact per Paper (SNIP) 2016: 0.535

Most Popular