Single-phase line start permanent magnet synchronous motor. Rotor construction and stator winding optimization

Open access


The paper deals with construction of single-phase line start permanent magnet synchronous motor. Circuit-field single-phase line start permanent magnet synchronous motor model based on the mass production single-phase induction motor was applied in Maxwell program. Various rotor constructions were taken into account. Influence of the rotor construction on the motor properties was examined. Running motor performances were examined.

[1] Aliabad A.D., Mirsalim, M., Ershad, N.F., Line-Start Permanent-Magnet Motors: Significant Improvementsin Starting Torque, Synchronization, and Steady-State Performance. IEEE Transactions on Magnetics 46(12): 4066-4072 (2010).

[2] Ebrahimi B.M., Faiz J., Hasanpour-Isfahani A., Impacts of rotor slots on interior permanent magnetmotors performance. Przegląd Elektrotechniczny 3 (2011).

[3] Fei W., Luk P., Ma J., Shen J.X., Yang G., A High-Performance Line-Start Permanent Magnet SynchronousMotor Amended From a Small Industrial Three-Phase Induction Motor. IEEE Transaction on Magnetics 45(10): 4724-4727 (2009).

[4] Feng X., Liu L., Kang J., Zhang Y., Super premium efficient line start-up permanent magnet synchronousmotor. 2010 XIX International Conference on Electrical Machines (ICEM), Rome, Italy, 6-8 September 2010, p. 1-6 (2010).

[5] Fengbo Q., Zhipeng L., Shukang Ch., Weili L., Calculation and simulation analysis on starting performanceof the high-voltage line-start PMSM. (ICCASM), 2010 International Conference on Computer Application and System Modeling 3: V3-198-V3-202 (2010).

[6] Guang Yang, Jun Ma, Jian-Xin Shen, Yu Wang, Optimal design and experimental verification ofa line-start permanent magnet synchronous motor. ICEMS 2008. International Conference on Electrical Machines and Systems, p. 3232-3236 (2008).

[7] Gwoździewicz M., Zawilak J., Influence of the permanent magnets arrangement on the single-phaseline start permanent magnet synchronous motor performances. Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały (2012).

[8] Gwoździewicz M., Zawilak J., Influence of the rotor construction on the single-phase line start permanentmagnet synchronous motor performances. Przegląd Elektrotechniczny 10 (2011).

[9] Gwoździewicz M., Zawilak J., Jednofazowy silnik synchroniczny z magnesami trwałymi o rozruchubezpośrednim. Konstrukcje magnetowodu. Maszyny Elektryczne. Zeszyty Problemowe. 95 (2012).

[10] Gyu-Hong Kang; Jin Hur; Hyuk Nam; Jung-Pyo Hong; Gyu-Tak Kim., Analysis of irreversiblemagnet demagnetization in line-start motors based on the finite-element method. Magnetics, IEEE Transactions on Volume 39(3), Part: 1 (2003).

[11] Kurihara K., Kubota T., Nitawaki D., Rotor Design for High Starting Performance of a Self-StartingSingle-Phase Permanent-Magnet Motor. Przegląd Elektrotechniczny 7b (2012).

[12] Kurihara K., Wakui G., Kubota T., Steady-state performance analysis of permanent magnet synchronousmotors including space harmonics. IEEE Transactions on Magnetics 30(3), (1994).

[13] Liang Fang, Lee, B.H., Jung-Pyo Hong, Hyuk Nam., Estimation of Magnet Reduction in Single-Phase Line-Start Permanent Magnet Synchronous Motor. Industry Applications Society Annual Meeting, IAS 2009, IEEE (2009).

[14] Lin D., Zhou P., Lambert N., Starting Winding Optimization in Single-Phase. Electrical Machines (ICEM), 2010 XIX International Conference

[15] Lu Q., Huang X., Ye Y. Fang Y., Experiment and analysis of high power line-start PM motor. Przegląd Elektrotechniczny 2 (2012).

[16] Pisek P., Stumberger B., Marcic T., Virtic P., Performance comparison of double and single rotorpermanent magnet machine. Przegląd Elektrotechniczny 3 (2011).

[17] Popescu M., Miller T.J.E., McGilp M.I., Torque behavior of 1-phase permanent magnet AC motor,Energy Conversion. IEEE Transactions on 21 (2006).

[18] Qing Zhao, Xiulian Wang, Shenbo Yu, Dong Zhang, Zhongliang An, Renyuan Tang, Study anddesign for large line-start permanent magnet synchronous motors. Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003, 1: 132-133 (2003).

[19] Szewczyk K., Golisz R., Walasek T., Kucharczyk Z., The influence of an air gap around the permanentmagnets with the flux concentrator in Permanent Magnet Synchronous Motor with InternalMagnetic Circuits. Przegląd Elektrotechniczny 12b (2011).

[20] Yang G., Ma J., Shen J.X., Wang Y., Optimal design and experimental verification of a line-startpermanent magnet synchronous motor. 2008. ICEMS 2008. International Conference on Electrical Machines and Systems, p. 3232-3236 (2008).

[21] Zhao H., Luo Y., Ren H.W., Peter B., A Complete Model for Iron Losses Prediction in Electric MachinesIncluding Material Measurement, Data Fitting, FE Computation and Experimental Validation. Przegląd Elektrotechniczny 5b (2012).

[22] Zhong H., Wang X., Wang D., Analysis and Design of a New Type High-efficiency Single-phaseInduction Motor Based on Negative Sequence Magnetic Field Compensation. Electrical Machines and Systems, 2008. ICEMS (2008).

Archives of Electrical Engineering

The Journal of Polish Academy of Sciences

Journal Information

CiteScore 2016: 0.71

SCImago Journal Rank (SJR) 2016: 0.238
Source Normalized Impact per Paper (SNIP) 2016: 0.535


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 93 93 29
PDF Downloads 47 47 14