The relevance and nature of a new technology for measurement of vibrational displacement of a material point through normal toward the object plane are stated in the article. This technology provides registration and processing of images of a round mark or a matrix of round marks, which are applied to the surface of a control object. A measuring signal here is the module of radius increment of the round mark image at vibrational blurring of this image. The method for calculation of the given error of measurements, as a function of a number of pixels of the round mark image, has been developed and proven in the present research. The results of pilot studies are given. Linearity of transformation of the measured size into a measuring signal has been proven. The conditions of a technical compromise between the field of view area of a recording device during distribution measurement of vibrational displacements along the surface of a control object, and the accuracy of this measurement are determined. The results are illustrated with numerical examples of calculations of the given error of measurements in the set field of view and the one at the given maximum set error of measurements.
If the inline PDF is not rendering correctly, you can download the PDF file here.
 R. C. Gonzalez and R. E. Woods, Digital image processing. New Jersey, USA: Prentice Hall, 2008.
 G. V. Tankov, S. A. Brostislov, N. K. Yurkov and A. V. Lysenko, “Information-measuring and operating systems to test for the effects of vibration,” in 2016 International Siberian Conference on Control and Communications, SIBCON, May 2016. https://doi.org/10.1109/SIBCON.2016.7491679
 P. H. Rogers and H. M. Cox, “Noninvasive vibration measurement system and method for measuring amplitude of vibration of tissue in an object being investigated,” The Journal of the Acoustical Society of America, vol. 86, no. 5, 1989. https://doi.org/10.1121/1.398507
 I. I. Kochegarov, E. A. Danilova, N. K. Yurkov, P. Y. Bushmelev, and A. M. Telegin, “Analysis and modeling of latent defects in the printed conductors,” in 2016 13th International Scientific-Technical Conference on Actual Problems of Electronics Instrument Engineering (APEIE), Novosibirsk, Russia, October 03–06, 2016. https://doi.org/10.1109/APEIE.2016.7806897
 A. V. Grigorev, A. K. Grishko, N. V. Goryachev, N. K. Yurkov, and A. M. Micheev, “Contactless three-component measurement of mirror antenna vibrations, “ Proceedings 2016 International Siberian Conference on Control and Communications, SIBCON, May 2016. https://doi.org/10.1109/SIBCON.2016.7491673
 A. K. Grishko, N. V. Goryachev, I. I. Kochegarov, and M. P. Kalaev, “Mathematical models of the system of measurement and analysis of temperature parameters of radio electronic modules,” in 2016 13th International Scientific-Technical Conference on Actual Problems of Electronics Instrument Engineering (APEIE), Novosibirsk, Russia, October 03–06, 2016. https://doi.org/10.1109/APEIE.2016.7806424
 C. Y. Fah, O. M. Rijal and N. M. Noor, “Image quality and noise evaluation, Signal Processing and Its Applications”, Proceedings, Seventh International Symposium, July 2003. https://doi.org/10.1109/ISSPA.2003.1224740
 E. Y. Maksimov, N. K. Yurkov, and A. N. Yakimov, “A finite-element model of the thermal influences on a microstrip antenna,” Measurement techniques, vol. 54, no. 2, pp. 207–212, May 2011. https://doi.org/10.1007/s11018-011-9707-y
 A. V. Dubravin, S. A. Zinkin, and D. V. Paschenko, “Formal and conceptual definitions of the hybrid model of distributed computings in networks,” Proceedings 2015 International Siberian Conference on Control and Communications, SIBCON, May 2015. https://doi.org/10.1109/SIBCON.2015.7147047
 M. Y. Mikheev, V. R. Roganov, P. G. Andreev, N. V. Goryachev, V. A. Trusov, “Developing the structure of the quality control system of power supply units in mobile robots,” Proceedings in 2017 International Siberian Conference on Control and Communications, SIBCON, June 2017. https://doi.org/10.1109/SIBCON.2017.7998579
 M. Zielinski and G. Ziller, “Noncontact vibration measurements on com-pressor rotor blades,” Measurement Science and Technology, vol. 11, no. 7, pp. 847–856, 2000. https://doi.org/10.1088/0957-0233/11/7/301
 K. R. McCall, M. Boudjema, I. B. Santos, R. A. Guyer, and G. N. Boitnott, “Nonlinear, hysteretic rock elasticity: Deriving modulus surfaces,” American Rock Mechanics Association DC Rocks, The 38th U.S. Symposium on Rock Mechanics (USRMS), Washington USA, 7–10 July, 2001.
 D. Herrmann, “Temperature Errors and Ways of Elimination for Contactless Measurement of Shaft Vibrations,” Technisches Messen, vol. 55, no. 1, 1988.
 W. B. Hempkins, R. H. Kingsborough, W. E. Lohec, and C. J. Nini, “Multivariate statistical analysis of stuck drillpipe situations,” SPE Drilling Engineering, vol. 2, no. 3, pp. 237–244, 1987. https://doi.org/10.2118/14181-PA
 V. S. Padalko and E. A. Zryumov, “Experimental Research of the Effect of the LEDs Brightness on the Structure of the Image of the Dynamic Test Ob-jest,” in Proceedings of 13th International Scientific-Technical Conference on Actual Problems of Electronic Instrument Engineering APEIE, Novosibirsk, Russian Federation, 2016, pp. 299–301. https://doi.org/10.1109/APEIE.2016.7802281
 C. Ding, J. L. G. Janssen, A. A. H. Damen, P. P. J. van den Bosch, J. J. H. Pau-lides and E. Lomonova, “Modeling and realization of a 6-DoF contactless elec-tromagnetic anti-vibration system and verification of its static behavior,” 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Kachsiung, Taiwan, August 2012, pp. 149–154. https://doi.org/10.1109/AIM.2012.6265880
 E. A. Zryumov, P. A. Zryumov and S. P. Pronin, “Optoelectronic stroboscop-ic system for measurement of the frequency of harmonic vibrations based on the use of a genetic algorithm,” in Measurement Techniques, vol. 55, no. 4, pp. 425–430, 2012. https://doi.org/10.1007/s11018-012-9976-0
 S. P. Pronin and E. A. Zryumov, “A meter of the double-amplitude peak and fre-quency of low-frequency harmonic vibrations,” in 2010 Instruments and Ex-perimental Techniques, vol. 53, no. 2, pp. 296–297, 2010. https://doi.org/10.1134/S0020441210020259