Discrete Models in Research of Wave Processes in Rod Structures of Radio-Electronic Means

Alexey Lysenko 1 , Nikolay Yurkov 1 , Vasiliy Trusov 1 , Tatyana Zhashkova 2  and Jurijs Lavendels 3
  • 1 Penza State University, Penza
  • 2 Penza State Technology University, Penza
  • 3 Riga Technical University, Riga, Latvia


The article shows the relevance of the application of discrete models of rod structures of radio-electronic means (REM) for the study of their behaviour under transient loading. A discrete model of the propagation of harmonic waves in the rod and the study of standing waves are proposed. Computational experiments using the proposed model are conducted. The results show that the model accurately reflects qualitative dynamics of the physical processes in the elastic rod while the waves of elastic deformations are passing through. The proposed models are used for software implementations of systems of mechanical simulation of the behaviour of rod structures.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] G. V. Tankov, S. A. Brostislov, N. K. Yurkov, and A. V. Lysenko, “Information-measuring and operating systems to test for the effects of vibration,” in 2016 International Siberian Conference on Control and Communications, SIBCON, May 2016. https://doi.org/10.1109/SIBCON.2016.7491679

  • [2] N. K. Yurkov, G. V. Tankov, A. V. Lysenko, and V. A. Trusov, “On the problem of experimental research of forced vibrations of plates,” in Proceedings of the 19th International Conference on Soft Computing and Measurements SCM, May 2016, pp. 416–418. https://doi.org/10.1109/SCM.2016.7519798

  • [3] N. K. Yurkov, V. A. Trusov, and A. V. Lysenko, “Methods of providing reliability of avionics and aerospace equipment at the design stage,” in 2016 13th International Scientific-Technical Conference on Actual Problems of Electronic Instrument Engineering, APEIE, Oct. 2016, pp. 123–127. https://doi.org/10.1109/APEIE.2016.7806427.

  • [4] A. V. Lysenko, N. V. Goryachev, N. K. Yurkov, A. M. Telegin, and V. A. Trusov, “Information-measuring control system of active vibration protection RED,” in Proceedings of 2016 IEEE East-West Design and Test Symposium, EWDTS, Oct. 2016. https://doi.org/10.1109/EWDTS.2016.7807740

  • [5] A. K. Grishko, N. V. Goryachev, I. I. Kochegarov, and M. P. Kalaev, “Mathematical models of the system of measurement and analysis of temperature parameters of radio electronic modules,” in 2016 13th International Scientific-Technical Conference on Actual Problems of Electronics Instrument Engineering (APEIE), Novosibirsk, Russia, October 03–06, 2016, vol. 2, pp. 112–115. https://doi.org/10.1109/APEIE.2016.7806424

  • [6] E. Y. Maksimov, N. K. Yurkov, and A. N. Yakimov, “A finite-element model of the thermal influences on a microstrip antenna,” in Measurement techniques, vol. 54, no. 2, pp. 207–212, May 2011. https://doi.org/10.1007/s11018-011-9707-y

  • [7] F. Xiao, K. Murano, and Y. Kami, “Analytical solution for two parallel traces on PCB in the time domain with application to hairpin delay lines,” in IEICE Transactions on Communications, E92B, no. 6, pp.1953–1959. https://doi.org/10.1587/transcom.E92.B.1953

  • [8] A. V. Dubravin, S. A. Zinkin, and D. V. Paschenko, “Formal and conceptual definitions of the hybrid model of distributed computings in networks,” in Proceedings 2015 International Siberian Conference on Control and Communications, SIBCON 2015, https://doi.org/10.1109/SIBCON.2015.7147047

  • [9] K. Meier, M. Roellig, A. Schiessl, and K.-J. Wolter, “Reliability study on chip capacitor solder joints under thermo-mechanical and vibration loading,” in 2014 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE, April 2014. https://doi.org/10.1109/EuroSimE.2014.6813863

  • [10] C. Schuster and W. Fichtner, “Parasitic modes on printed circuit boards and their effects on EMC and signal integrity,” in IEEE Transactions on Electromagnetic Compatibility, vol. 43, no. 4, pp. 416–425, 2001. https://doi.org/10.1109/15.974621

  • [11] A. Gerasimenko, K. Ivanov, V. Kislyukov, and V. Roganov, “A new faults blocking method for out-of-step protection” in Proceedings of IEEE East-West Design & Test Symposium (EWDTS’2017), Novi Sad, Serbia, September 29 – October 2, pp. 641–645, 2017. https://doi.org/10.1109/EWDTS.2017.8110045

  • [12] I. Kochegarov, G. Tankov, and E. Danilova, “Dynamic Characteristics of Printed Circuit Assembly under the Influence of Temperature,” in 2016 XIX IEEE International Conference on Soft Computing and Measurements (SCM), pp. 131–134, July 2016. https://doi.org/10.1109/SCM.2016.7519706

  • [13] I. Kochegarov, A. Tynda, and N. V. Goryachev, “The method of obtaining the thermal model of the printing circuit assembly,” in 2016 XIX IEEE International Conference on Soft Computing and Measurements (SCM), St. Petersburg, Russia, pp. 183–185, 2016. https://doi.org/10.1109/SCM.2016.7519722

  • [14] F. E. Dupriest, W. C. Elks Jr., and S. Ottesen, “Design methodology and operational practices eliminate differential sticking,” SPE Drilling and Completion, vol. 26, no. 1, pp. 115–123, 2011. https://doi.org/10.2118/128129-PA

  • [15] M. Y. Mikheev, V. R. Roganov, P. G. Andreev, N. V. Goryachev, and V. A. Trusov, “Developing the structure of the quality control system of power supply units in mobile robots,” in Proceedings of 2017 International Siberian Conference on Control and Communications, SIBCON 2017, June 2017. https://doi.org/10.1109/SIBCON.2017.7998579

  • [16] W. B. Hempkins, R. H. Kingsborough, W. E. Lohec, and C. J. Nini, “Multivariate statistical analysis of stuck drillpipe situations,” SPE Drilling Engineering, vol. 2, no. 3, pp. 237–244, 1987. https://doi.org/10.2118/14181-PA

  • [17] K. R. McCall, M. Boudjema, I. B. Santos, R. A. Guyer, and G. N. Boitnott, “Nonlinear, hysteretic rock elasticity: Deriving modulus surfaces,” American Rock Mechanics Association DC Rocks, The 38th U.S. Symposium on Rock Mechanics (USRMS), Washington, USA, 7–10 July, 2001.

  • [18] S. Zhong, S. O. Oyadiji, and K. Ding, “Response-only method for damage detection of beam-like structures using high accuracy frequencies with auxiliary mass spatial probing,” Journal of Sound and Vibration, vol. 311, no 3–5, pp. 1075–1099, 2008. https://doi.org/10.1016/j.jsv.2007.10.004

  • [19] I. P. Shatskii and V. V. Perepichka, “Shock-wave propagation in an elastic rod with a viscoplastic external resistance,” Journal of Applied Mechanics and Technical Physics, vol. 54, no. 6, pp. 1016–1020, 2013. https://doi.org/10.1134/S0021894413060163

  • [20] J. M. Borwein and M. P. Skerritt, An Introduction to Modern Mathematical Computing. Springer, 2012. https://doi.org/10.1007/978-1-4614-0122-3


Journal + Issues