Poly(3-hydroxybutyrate): Promising biomaterial for bone tissue engineering

Abstract

Poly(3-hydroxybutyrate) is a natural polymer, produced by different bacteria, with good biocompatibility and biodegradability. Cardiovascular patches, scaffolds in tissue engineering and drug carriers are some of the possible biomedical applications of poly(3-hydroxybutyrate). In the past decade, many researchers examined the different physico-chemical modifications of poly(3-hydroxybutyrate) in order to improve its properties for use in the field of bone tissue engineering. Poly(3-hydroxybutyrate) composites with hydroxyapatite and bioglass are intensively tested with animal and human osteoblasts in vitro to provide information about their biocompatibility, biodegradability and osteoinductivity. Good bone regeneration was proven when poly(3-hydroxy-butyrate) patches were implanted in vivo in bone tissue of cats, minipigs and rats. This review summarizes the recent reports of in vitro and in vivo studies of pure poly(3-hydroxy-butyrate) and poly(3-hydroxybutyrate) composites with the emphasis on their bioactivity and biocompatibility with bone cells.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. H. Tian, Z. Tang, X. Zhuang, X. Chen and X. Jing, Biodegradable synthetic polymers: Preparation, functionalization and biomedical application, Prog. Polym. Sci. 37 (2012) 237−280; https://doi.org/10.1016/j.progpolymsci.2011.06.004

  • 2. D. B. Hazer, E. Kiliçay and B. Hazer, Poly(3-hydroxyalkanoate)s: Diversification and biomedical applications A state of art review, Mater. Sci. Eng. C 32 (2012) 637−647; https://doi.org/10.1016/j.msec.2012.01.021

  • 3. M. Goonoo, A. Bhaw-Luximon, P. Passanha, S. R. Esteves and D. Jhurry, Third generation poly(hydroxyacid) composite scaffolds for tissue reengineering, J. Biomed. Mater. Res. B Appl. Biomater. 105B (2017) 1667−1684; https://doi.org/10.1002/jbm.b.33674

  • 4. A. R. Amini, C. T. Laurencin and S. P. Nukavarapu, Bone tissue engineering: recent advances and challenges, Crit. Rev. Biomed. Eng. 40 (2012) 363−408.

  • 5. S. Bose, M. Roy and A. Bandyopadhyay, Recent advances in bone tissue engineering scaffolds, Trends Biotechnol. 30 (2012) 546−554; https://doi.org/10.1016/j.tibtech.2012.07.005

  • 6. L. Wu, L. Wang, X. Wang and K. Xu, Synthesis, characterization and biocompatibility of novel bio-degradable star block copolymers based on poly[(R)-3-hydroxybutyrate] and poly(ε-caprolactone), Acta Biomater. 6 (2010) 1079−1089; https://doi.org/10.1016/j.actbio.2009.08.014

  • 7. E. Masaeli, M. Morshed, P. Rasekhian, S. Karbasi, K. Karbalaie, F. Karamali, D. Abedi, S. Razavi, A. Jafarian-Dehkordi, M. H. Nasr-Esfahani and H. Baharvand, Does the tissue engineering architecture of Poly(3-hydroxybutyrate) scaffolds affect cell-material interactions? J. Biomed. Mater. Res. A 100A (2012) 1907−1918; https://doi.org/10.1002/jbm.a.34131

  • 8. M. M. Reddy, S. Vivekanandhan, M. Misra, S. K. Bhatia and A. K. Mohanty, Biobased plastics and bionanocomposites: Current status and future opportunities, Prog. Polym. Sci. 38 (2013) 1653−1689; https://doi.org/10.1016/j.progpolymsci.2013.05.006

  • 9. C. Peña, T. Castillo, A. Garcia, M. Millan and D. Segura, Biotechnological strategies to improve production of microbial poly(3-hydroxybutyrate): a review of recent research work, Microbial Biotechnol. 7 (2014) 278−293; https://doi.org/10.1111/1751-7915.12129

  • 10. S. Centeno-Leija, G. Huerta-Beristain, M. Giles-Gomez, F. Bolivar, G. Gosset and A. Martinez, Improving poly-3-hydroxybutyrate production in Escherichia coli by combining the increase in the NADPH pool and acetyl-CoA availability, Antonie van Leeuwenhoek 105 (2014) 687−696; https://doi.org/10.1007/s10482-014-0124-5

  • 11. A. M. Hayati, S. M. Hosseinalipour, H. R. Rezaie and M. A. Shokrgozar, Characterization of poly(3-hydroxybutyrate)/nano-hydroxyapatite composite scaffolds fabricated without the use of organic solvents for bone tissue engineering applications, Mater. Sci. Eng. C 32 (2012) 416−422; https://doi.org/10.1016/j.msec.2011.11.013

  • 12. B. S. Kushwah, A. V. S. Kushwah and V. Singh, Towards understanding polyhydroxyalkanoates and their use, J. Polym. Res. 23 (2016) 153−166; https://doi.org/10.1007/s10965-016-0988-3

  • 13. R. W. Lenz and R. H. Marchessault, Bacterial polyesters: Biosynthesis, biodegradable plastics and biotechnology, Biomacromolecules 6 (2005) 1−8; https://doi.org/10.1021/bm049700c

  • 14. Y. Zhao, B. Zou, Z. Shi, Q. Wu and G. Q. Chen, The effect of 3-hydroxybutyrate on the in vitro differentiation of murine osteoblast MC3T3-E1 and in vivo bone formation in ovariectomized rats, Biomaterials 28 (2007) 3063−3073; https://doi.org/10.1016/j.biomaterials.2007.03.003

  • 15. S. Cheng, G. Q. Chen, M. Leski, B. Zou, Y. Wang and Q. Wu, The effect of D,L-β-hydroxybutyric acid on cell death and proliferation, Biomaterials 27 (2006) 3758−3765; https://doi.org/10.1016/j.biomaterials.2006.02.046

  • 16. C. J. Brigham and A. J. Sinskey, Applications of polyhydroxyalkanoates in the medical industry, Int. J. Biotechnol. Wellness Ind. (IJBWI) 1 (2012) 53−60

  • 17. E. I. Shishatskaya and T. G. Volova, A comparative investigation of biodegradable polyhydroxyalkanoate films as matrices for in vitro cell cultures, J. Mater. Sci. Mater. Med. 15 (2004) 915−923; https://doi.org/10.1023/B:JMSM.0000036280.98763.c1

  • 18. S. W. Hong, H. W. Hsu and M. T. Ye, Thermal properties and applications of low molecular weight polyhydroxybutyrate, J. Therm. Anal. Calorim. 111 (2013) 1243−1250; https://doi.org/10.1007/s10973-012-2503-3

  • 19. I. Manavitehrani, A. Fathi, H. Badr, S. Daly, A. N. Shirazi and F. Dehghani, Biomedical applications of biodegradable polyesters, Polymers 8 (2016) Article ID 20 (32 pages); https://doi.org/10.3390/polym8010020

  • 20. R. Y. Basha, S. Kumar and M. Doble, Design of biocomposite materials for bone tissue regeneration, Mater. Sci. Eng. C 57 (2015) 452−463; https://doi.org/10.1016/j.msec.2015.07.016

  • 21. S. H. Lee and H. Shin, Matrices and scaffolds for delivery of bioactive molecules in bone and cartilage tissue engineering, Adv. Drug Deliv. Rev. 59 (2007) 339−359; https://doi.org/10.1016/j.addr.2007.03.016

  • 22. D. W. Hutmacher, Scaffolds in tissue engineering bone and cartilage, Biomaterials 21 (2000) 2529−2543; https://doi.org/10.1016/S0142-9612(00)00121-6

  • 23. P. P. Lopes, M. P. Garcia, M. H. Fernandes and M. H. V. Fernandes, Acrylic formulations containing bioactive and biodegradable filters to be used as bone cements: Properties and biocompatibility assessment, Mater. Sci. Eng. C 33 (2013) 1289−1299; https://doi.org/10.1016/j.msec.2012.12.028

  • 24. M. Sadat-Shojai, M. T. Khorasani, A. Jamshidi and S. Irani, Nano-hydroxyapatite reinforced polyhydroxybutyrate composites: A comprehensive study on the structural and in vivo biological properties, Mater. Sci. Eng. C 33 (2013) 2776−2787; https://doi.org/10.1016/j.msec.2013.02.041

  • 25. Y. Zhang, L. Hao, M. M. Savalani, R. A. Harris, L. Di Silvio and K. E. Tanner, In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering, J. Biomed. Mater. Res. A 91A (2009) 1018−1027; https://doi.org/10.1002/jbm.a.32298

  • 26. H. Zhou and J. Lee, Nanoscale hydroxyapatite particles for bone tissue engineering, Acta Biomater. 7 (2011) 2769−2781; https://doi.org/10.1016/j.actbio.2011.03.019

  • 27. J. Michel, M. Penna, J. Kochen and H. Cheung, Recent advances in hydroxyapatite scaffolds containing mesenchymal stem cells, Stem Cell. Int. 2015 (2015) Article ID 305217 (13 pages); https://doi.org/10.1155/2015/305217

  • 28. Y. W. Wang, Q. Wu, J. Chen and G. Q. Chen, Evaluation of three-dimensional scaffolds made of blends of hydroxyapatite and poly(3-hydroxybutyrate-co-3-hydroxyhexynoate) for bone reconstruction, Biomaterials 26 (2005) 899−904; https://doi.org/10.1016/j.biomaterials.2004.03.035

  • 29. E. I. Shishatskaya, I. A. Khlusov and T. G. Volova, A hybrid PHB-hydroxyapatite composite for biomedical application: production, in vitro and in vivo investigation, J. Biomater. Sci. Polym. Ed. 17 (2006) 481−498.

  • 30. J. Ramier, D. Grande, T. Bouderlique, O. Stoilova, N. Manolova, I. Rashkov, V. Langlois, P. Albanese and E. Renard, From design of bio-based biocomposite electrospun scaffolds to osteogenic differentiation of human mesenchymal stromal cells, J. Mater. Sci. Mater. Med. 25 (2014) 1563−1575; https://doi.org/10.1007/s10856-014-5174-8

  • 31. A. Saadat, A.A. Behnamghader, S. Karbasi, D. Abedi, M. Soleimani and A. Shafiee, Comparison of acellular and cellular bioactivity of poly 3-hydroxybutyrate/hydroxyapatite nanocomposite and poly 3-hydroxybutyrate scaffolds, Biotechnol. Bioprocess Eng. 18 (2013) 587−593; https://doi.org/10.1007/s12257-012-0744-4

  • 32. Z. Chen, Y. Song, J. Zhang, W. Liu, J. Cui, H. Li and F. Chen, Laminated electrospun nHA/PHB-composite scaffolds mimicking bone extracellular matrix for bone tissue engineering, Mater. Sci. Eng. C 72 (2017) 341−351; https://doi.org/10.1016/j.msec.2016.11.070

  • 33. M. Sadat-Shojai, Electrospun polyhydroxybutyrate/hydroxyapatite nanohybrids: microstructure and bone cell response, J. Mater. Sci. Technol. 32 (2016) 1013−1020; https://doi.org/10.1016/j.jmst.2016.07.007

  • 34. B. Pourmollaabbassi, S. Karbasi and B. Hashemibeni, Evaluate the growth and adhesion of osteo-blast cells on nanocomposite scaffold of hydroxyapatite/titania coated with poly hydroxybutyrate, Adv. Biomed. Res. 5 (2016) Article ID 156 (11 pages); https://doi.org/10.4103/2277-9175.188486

  • 35. H. Hajiali, M. Hosseinalipour, S. Karbasi and M. A. Shokrgozar, The influence of bioglass nano-particles on the biodegradation and biocompatibility of poly(3-hydroxybutyrate) scaffolds, Int. J. Artif. Organs 35 (2012) 1015−1024; https://doi.org/10.5301/ijao.5000119

  • 36. S. K. Misra, T. I. Ansari, S. P. Valappil, D. Mohn, S. E. Philip, W. J. Stark, I. Roy, J. C. Knowles, V. Salih and A. R. Boccaccini, Poly(3-hydroxybutyrate) multifunctional composite scaffolds for tissue engineering applications, Biomaterials 31 (2010) 2806−2815; https://doi.org/10.1016/j.biomaterials.2009.12.045

  • 37. M. Meischel, J. Eichler, E. Martinelli, U. Karr, J. Weigel, G. Schmöller, E. K. Tschegg, S. Fischerauer, A. M. Weinberg and S. E. Stanzl-Tschegg, Adhesive strength of bone-implant interfaces and in-vivo degradation of PHB composites for load-bearing applications, J. Mech. Behav. Biomed. Mater. 53 (2016) 104−118; https://doi.org/10.1016/j.jmbbm.2015.08.004

  • 38. M. Franceschini, A. Di Matteo, H. Bösebeck, H. Büchner and S. Vogt, Treatment of a chronic recurrent fistulized tibial osteomyelitis: administration of a novel antibiotic-loaded bone substitute combined with a pedicular muscle flap sealing, Eur. J. Orthop. Surg. Traumatol. 22 (2012) 245−249; https://doi.org/10.1007/s00590-012-0956-5

  • 39. L. Medvecky, Microstructure and properties of polyhydroxybutyrate-chitosan-nanohydroxyapatite composite scaffolds, Sci. World J. 2012 (2012) Article ID 537973 (8 pages); https://doi.org/10.1100/2012/537973

  • 40. H. Y. Tai, E. Fu, L.-P. Cheng and T.-M. Don, Fabrication of asymmetric membranes from polyhydroxybutyrate and biphasic calcium phosphate/chitosan for guided bone regeneration, J. Polym. Res. 21 (2014) Article ID 421 (12 pages); https://doi.org/10.1007/s10965-014-0421-8

  • 41. M. Giretova, L. Medvecky, R. Stulajterova, T. Sopcak, J. Briancin and M. Tatarkova, Effect of enzymatic degradation of chitosan in polyhydroxybutyrate/chitosan/calcium phosphate composites on in vitro osteoblast response, J. Mater. Sci. Mater. Med. 27 (2016) Article ID 181; https://doi.org/10.1007/s10856-016-5801-7

  • 42. Y. Ding, Q. Yao, W. Li, D. W. Schubert, A. R. Boccaccini and J. A. Roether, The evaluation of physical properties and in vitro cell behavior of PHB/PCL/sol-gel derived silica hybrid scaffolds and PHB/PCL/fumed silica composite scaffolds, Colloids Surf. B Biointerfaces 136 (2015) 93−98; https://doi.org/10.1016/j.colsurfb.2015.08.023

  • 43. Y. Ding, W. Li, T. Müller, D. W. Schubert, A. R. Boccaccini, Q. Yao and J. A. Roether, Electrospun polyhydroxybutyrate/poly(ε-caprolactone)/58S sol−gel bioactive glass hybrid scaffolds with highly improved osteogenic potential for bone tissue engineering, Appl. Mater. Interfaces 8 (2016) 17098−17108; https://doi.org/10.1021/acsami.6b03997

  • 44. C. Zhijiang, X. Yi, Y. Haizheng, J. Jia and Y. Liu, Poly(hydroxybutyrate)/cellulose acetate blend nano-fiber scaffolds: Preparation, characterization and cytocompatibility, Mater. Sci. Eng. C 58 (2016) 757−767; https://doi.org/10.1016/j.msec.2015.09.048

  • 45. A. Venault, A. Subarja and Y. Chang, Zwitterionic polyhydroxybutyrate electrospun fibrous membranes with a compromise of bioinert control and tissue-cell growth, Langmuir 33 (2017) 2460−2471; https://doi.org/10.1021/asc.langmuir.6b04683

  • 46. N. Goonoo, A. Bhaw-Luximon, P. Passanha, S. Esteves, H. Schönherr and D. Jhurry, Biomineralization potential and cellular response of PHB and PHBV blends with natural anionic polysaccharides, Mater. Sci. Eng. C 76 (2017) 13−24; https://doi.org/10.1016/j.msec2017.02.156

  • 47. H. Li, H. Pan, C. Ning, G. Tan, J. Liao and G. Ni, Magnesium with micro-arc oxidation coating and polymeric membrane: an in vitro study on microenvironment, J. Mater. Sci. Mater. Med. 26 (2015) Article ID 147; https://doi.org/10.1007/s10856-015-5428-0

  • 48. Y. W. Wang, Q. Wu and G. Q. Chen, Attachment, proliferation and differentiation of osteoblasts on random biopolyester poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds, Biomaterials 25 (2004) 669−675; https://doi.org/10.1016/S0142-9612(03)00561-1

  • 49. M. Sadat-Shojai, M. T. Khorasani and A. Jamshidi, A new strategy for fabrication of bone scaffolds using electrospun nano-Hap/PHB fibers and protein hydrogels, Chem. Eng. J. 289 (2016) 38−47; https://doi.org/10.1016/j.cej.2015.12.079

  • 50. S. W. Peng, X. Y. Guo, G. G. Shang, J. Li, X. Y. Xu, M. L. You, P. Li and G. Q. Chen, An assessment of the risk of carcinogenicity associated with polyhydroxyalkanoates through an analysis of DNA aneuploid and telomerase activity, Biomaterials 32 (2011) 2546−2555; https://doi.org/10.1016/j.biomaterials.2010.12.051

  • 51. A. Q. Ali, T. P. Kannan, A. Ahmad and Ab. R. Samsudin, In vitro genotoxicity tests for polyhydroxy-butyrate − A synthetic biomaterial, Toxicol. in Vitro 22 (2008) 57−67; https://doi.org/10.1016/j.tiv.2007.08.001

  • 52. Y. Wang, X. L. Jiang, S. W. Peng, X. Y. Guo, G. G. Shang, J. C. Chen, Q. Wu and G. Q. Chen, Induced apoptosis of osteoblasts proliferating on polyhydroxyalkanoates, Biomaterials 34 (2013) 3737−3746; https://doi.org/10.1016/j.biomaterials.2013.01.088

  • 53. C. Rentsch, B. Rentsch, A. Breier, A. Hofmann, S. Manthey, D. Scharnweber and H. Zwipp, Evaluation of the osteogenic potential and vascularization of 3D poly(3)hydroxybutyrate scaffolds subcutaneously implanted in nude rats, J. Biomed. Mater. Res. A 92A (2010) 185−195; https://doi.org/10.1002/jbm.a.32314

  • 54. Z. Karahaliloğlu, B. Ercan, E. N. Taylor, S. Chung, E. B. Denkbas and T. J. Webster, Antibacterial nanostructured polyhydroxybutyrate membranes for guided bone regeneration, J. Biomed. Nanotechnol. 11 (2015) 2253−2263; https://doi.org/10.1166/jbn.2015.2106

  • 55. I. Rozila, P. Azari, S. Munirah, W. K. Z. W. Safwani, S. N. Gan, A. G. N. Azurah, J. Jahendran, B. Pingguan-Murphy and K. H. Chua, Differential osteogenic potential of human adipose-derived stem cells co-cultured with human osteoblasts on polymeric microfiber scaffolds, J. Biomed. Mater. Res. A 104A (2016) 377−387; https://doi.org/10.1002/jbm.a.35573

  • 56. P. Slepička, I. Michaljaničová, S. Rimpelová and V. Švorčík, Surface roughness in action – Cells in opposition, Mater. Sci. Eng. C 76 (2017) 818−826; https://doi.org/10.1016/j.msec.2017.03.061

  • 57. H. E. Bernd, C. Kunze, T. Freier, K. Sternberg, S. Kramer, D. Behrend, F. Prall, M. Donat and B. Kramp, Poly(3-hydroxybutyrate) (PHB) patches for covering anterior skull base defects - an animal study with minipigs, Acta Otolaryngol. 129 (2009) 1010−1017; https://doi.org/10.1080/00016480802552493

  • 58. T. Gredes, T. Gedrange, C. Hinüber, M. Gelinsky and C. Kunert-Keil, Histological and molecular-biological analyses of poly(3-hydroxybutyrate) (PHB) patches for enhancement of bone regeneration, Ann. Anat. 199 (2015) 36−42; https://doi.org/10.1016/j.aanat.2014.04.003

  • 59. E. G. L. Alves, C. M. F. Rezende, R. Serakides, M. M. Pereira and I. R. Rosado, Orthopedic implant of a polyhydroxybutyrate (PHB) and hydroxyapatite composite in cats, J. Feline Med. Surg. 13 (2011) 546-552; https://doi.org/10.1016/j.jfms.2011.03.002

  • 60. A. Celarek, T. Kraus, E. K. Tschegg, S. F. Fischerauer, S. Stanzl-Tschegg, P. J. Uggowitzer and A. M. Weinberg, PHB, crystalline and amorphous magnesium alloys: Promising candidates for bioresorbable osteosynthesis implants? Mater. Sci. Eng. C 32 (2012) 1503−1510; https://doi.org/10.1016/j.msec.2012.04.032

OPEN ACCESS

Journal + Issues

Search