Estimation of the Modulus Fir Wood Reinforced With PBO Fiber Mesh

Open access

Abstract

This paper presents the results of preliminary tests for estimating the modulus of elasticity of wooden beams from firs reinforced with PBO fiber mesh. The tests were carried out in the Materials Strength Laboratory at the Kielce University of Technology in Kielce, Poland with PN-EN 408: 2004. The wooden elements were subjected to a four-point bending test with the aim of estimating the elastic modulus when bending, assuming the loading velocities of the loading forces of 5 mm / min. The obtained results show a significant increase in the load-bearing capacity of beams reinforced with PBO mesh.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. Kotwica J (2004) Konstrukcje drewniane w budownictwie tradycyjnym Arkady Warszawa.

  • 2. P. G. Kossakowski “Influence of anisotropy on the energy release. rate GI for highly orthotropic materials” Journal of Theoretical and Applied Mechanics: 45 739-752 2007.

  • 3. P. G. Kossakowski “Stress Modified Critical Strain criterion for S235JR steel at low initial stress triaxiality” Journal of Theoretical and Applied Mechanics: 52 995–1006 2014.

  • 4. P. G. Kossakowski W. Wciślik “Effect of critical void volume fraction fF on results of ductile fracture simulation for S235JR steel under multi-axial stress states” Key Engineering Materials – Fracture and Fatigue of Materials and Structures 598: 113–118 2014.

  • 5. P. G. Kossakowski “An analysis of the Tvergaard parameters at low initial stress triaxiality for S235JR steel” Polish Maritime Research: 21 100–107 2014

  • 6. Mazars J.: A description of micro- and macroscale damage of concrete structures Engineering Fracture Mechanics 25(5-6) (1986) pp. 729-737.

  • 7. Chaboche J. L. Lesne P. M. Maire J. F.: Continuum Damage Mechanics Anisotropy and Damage Deactivation for Brittle Materials Like Concrete and Ceramic Composites International Journal of Damage Mechanics 4(1) (1995) pp. 5-22.

  • 8. Sandhaas C. Van de Kuilen J.W. Blass H.J.: Constitutive model for wood based on continuum damage mechanics WCTE World conference on timber engineering Auckland New Zealand 15-19 July 2012 pp. 159-167.

  • 9. Stefańczyk B (2005) Budownictwo ogólne. Materiały i wyroby budowlane. Tom 1. Arkady Warszawa.

  • 10. Rudziński L (2010) Konstrukcje drewniane. Naprawy wzmocnienia przykłady obliczeń.Wydawnictwo Politechniki Świętokrzyskiej Kielce.

  • 11. PN-EN 408:2004 Konstrukcje drewniane. Drewno konstrukcyjne i klejone warstwowo. Oznaczanie niektórych właściwości fizycznych i mechanicznych.

  • 12. PN-EN 384:2004 Drewno konstrukcyjne.Oznaczanie wartości charakterystycznych właściwości mechanicznych i gęstości.

  • 13. Nowak T Brol J Jasieńko J(2013) Estimation of the strength parameters of wood in building structures – preliminary studies. Forestry and Wood Technology nr 83: 303-306.

Search
Journal information
Impact Factor


CiteScore 2018: 0.80

SCImago Journal Rank (SJR) 2018: 0.304
Source Normalized Impact per Paper (SNIP) 2018: 0.866

Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 90 90 13
PDF Downloads 81 81 6