Currently, a worldwide dynamic rise of interest in using soil as a construction material can be observed. This trend is evident in the rapid rise of the amount of standards that deal with soil techniques. In 2012 the number of standards was larger by one third than five years prior. To create a full standardization of the rammed earth technique it is necessary to take into account the diversity of used soil and stabilizing additives. The proportion of the components, the process of element production and the research methods must also be made uniform. The article describes the results of research on the compressive strength of rammed earth samples that differed from each other with regards to the type of loam used for the mixture and the amount of the stabilizer. The stabilizer used was Portland cement CEM I 42.5R. The research and the analysis of the results were based on foreign publications, the New Zealand standard NZS 4298:1998, the American Standard NMAC14.7.4 and archival Polish Standards from the 1960’s that dealt with earth material.
1. M. Hall, Y. Djerbib “Rammed earth sample production: context, recommendations and consistency”, Construction and Building Materials 18, pp 281-286, 2004
2. P. Jęda ”Wpływ rodzaju gliny i zawartości stabilizatora na wytrzymałość na ściskanie ziemi ubijanej”, Bachelor’s thesis, Warsaw University of Technology, Poland, 2014
3. New Zealand Standard NZS 4298: 1998 Materials and workmanship for earth buildings – incorporating amendment no. 1. Standards New Zealand, Wellington, New Zealand, 1998.
4. Construction Industries Division of the Regulation and Licensing, New Mexico Earthen Building Materials Code, 14.7.4NMAC Housing and Construction, 2006, Santa Fe, New Mexico
5. V. Maniatidis, P. Walker, “A review of Rammed Earth Construction”, Innovation Project “Developing Rammed Earth for UK Housing”, Natural Building Technology Group, Department of Architecture & Civil Engineering, University of Bath, 2003
6. C. T. S. Beckett, C. E. Augarde “The effect of climate on the unconfined compressive strength of rammed earth” Unsaturated Soils: Research and Applications, pp 287-292, 2012
7. H. Houben, H. Guillaud “Earth construction – a comprehensive guide”. Second ed. London: Intermediate Technology Publications, 1996.
8. M. Hall, ‘The mechanisms of moisture ingress and migration in rammed earth walls”, PHD thesis, Sheffield Hallam University, UK, 2004