Search Results

1 - 10 of 36 items :

  • physical tests x
  • Geosciences, other x
  • Mechanics and Fluid Dynamics x
Clear All
Effective Friction Angle Of Deltaic Soils In The Vistula Marshlands

1 Introduction 1.1 Aim of research This research is focused on effective angle of internal friction and compares the results for the Vistula Marshlands muds and peats with similar soft soils. Effective shear strength parameters of the deltaic soils near Gdańsk are measured in drained and undrained triaxial compression tests and estimated with the Norwegian Institute of Technology (NTH) method using the Cone Penetration Tests (CPTU) sounding. The observed dilative-contractive soil behaviour is discussed taking into account the CPTU classification chart

Open access
Effect of randomly distributed polypropylene fiber reinforcement on the shear behavior of sandy soil

, 23 ] Experimental results from various tests (direct shear, unconfined compression and triaxial compression) have confirmed that the efficiency of fiber treatment is highly dependent on the fiber concentration, on testing conditions (e.g., stress and strain levels, stress path and loading direction) and on a large number of variables related equally to the physical and dimensional characteristics of both fiber and sand matrix (e.g.,fiber and particle sizes and particle size distribution, particle shape and fiber surface, fiber/grain frictional properties

Open access
Effect of using insert on the flow pressure in cylindrical silo

Description of the Model Experiments were conducted using a silo model similar to the real silo. A physical model of the silo was build, and the dimension of the model was defined in proportion to the real silo. In addition to that, the material flow was also modeled in order to have an accurate result that can be applied on the real silo. The dimensional analysis theory has been considered. Through a number of steps including determining the variable affecting the studied case, the dimension of the model was determined, and 1/10 was adopted as the chosen model scale, and

Open access
Mixture of Crushed- Stone Aggregate as Material For Substructure Layers

method of marking the indicator for material requires to conductit after four days of soaking, which simulates unfavourable conditions of water saturation. Unfortunately, the CBR test method is laborious and time consuming [ 22 ]. This article analyses the geotechnical and physical test results with particular consideration of CBR of mixtures of crushed aggregate assessed for their application in road construction as subgrade layer. An attempt was also made to find the correlation between CBR ratio and other physical properties. All aggregate tests were performed at

Open access
Experimental identification of modal parameters for the model of a building subjected to short-term kinematic excitation

the object were excited kinematically, with the movement of the structure’s base interpreted as an input signal in the system, being short-term and irregular. It was assumed that the theoretical model, resulting from the physical model, is a discrete system with three degrees of freedom (see Fig. 1b ) This assumption is justified by the fact that the structure of the physical model is very similar to a shear building type, in relation to which only transverse (horizontal) vibrations are considered. Figure 1 The slab-and-column model: (a) physical; (b

Open access
LOESSES NEAR KRAKÓW IN LIGHT OF GEOLOGICAL-ENGINEERING RESEARCH

Scientific Publishers, PWN, Warszawa 1998, (in Polish). [4] KOLASA M., Geotechnical properties of loesses near Kraków, Prace Geologiczne PAN, 18, 1963, 7-84, (in Polish). [5] LUNNE T., ROBERTSON P.K., POWELL J.J.M., Cone Penetration Testing in geotechnical practice, Blackie Academic and Professional, London 1997. [6] ŁANCZONT M., WOJTANOWICZ J., Peryglacial zonation of silt deposits in Poland, Annales UMCS, sec. B, 54, 1999, 41-48, (in Polish). [7] MALINOWSKI J., Engineering geology investigation of loesses

Open access
MECHANICAL PROPERTIES OF BOTTOM ASH – DREDGED MATERIAL MIXTURES IN LABORATORY TESTS

Abstract

Bottom ash from EC Gdańsk and dredged material taken from the mouth of The Vistula were mixed to form an engineering material used for dike construction. Mixtures with different bottom ash content were tested in laboratory to determine its basic physical and mechanical properties. The optimum bottom ash-dredged material mixture, built in the corps of the test dike, contains 70% of ash. The optimum bottom ash content in the mixture was chosen taking into account high internal friction angle, good compaction and reduced filtration coefficient. The maximum dry density of the mixtures was measured in Proctor test for the mixtures formed in laboratory and on samples taken from the test dike. Minimum and maximum void ratio were also determined.

Open access
Pile Model Tests Using Strain Gauge Technology

References [1] HOFFMANN K., An Introduction to Stress Analysis and Transducer Design using Strain Gauge, HBM. Retrieved July 5, 2014, from HBM http://www.hbm.com/en/menu/tips-tricks/experimentalstress- analysis/reference-book/ [2] KRASIŃSKI A., Model tests of screwed piles, Proceedings of the XIV Danube-European Conference on Geotechnical Engineering. From Research to Design in European Practice, 2-4 June 2010, Bratislava. [3] KRASIŃSKI A., Screw displacement piles. Interaction with non-cohesive soil

Open access
THE EFFECTIVENESS OF DECONVOLUTION PROCESS IN PRESENCE OF RANDOM NOISE ON THE BASE OF ROCK SALT DEPOSITS FROM “BYTOM ODRZAŃSKI” AREA

Abstract

A number of synthetic pseudoacoustic impedance sections are presented in order to test the effectiveness of deconvolution process when random noise distorted the seismic traces. A simplified seismological model is created on the basis of geological data from Bytom Odrzański area in NW part of the Legnica-Głogów Copper District (LGOM). The synthetic sections are constructed for different noise levels. Acoustic impedance is one of the basic factors characterising physical features of rocks. The main idea is the inversion of seismic sections into pseudoacoustic impedance sections. All inhomogeneities of salt deposits must be predicted before the underground storage location is fixed. The accuracy and reliability of interpretation decreases when the noise in seismic data increases. It should be realised that the inversion procedure is not a unique process. So, modelling pseudoacoustic impedance sections is recommended for verification of the effectiveness of deconvolution process for the accuracy and reliability interpretation.

Open access
Stress-Dilatancy for Soils. Part III: Experimental Validation for the Biaxial Condition

, 2009, Vol. 11, 129-137. [11] HAN C., DRESCHER A., Shear bands in biaxial tests on dry coarse sand, Soils and Foundations, 1993, Vol. 33, No. 1, 118-132. [12] HORNE M.R., The Behaviour of an Assembly of Rotund, Rigid, Cohesionless Particles. I. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1965, Vol. 286, No. 1404, 62-78. [13] HORNE M.R., The Behaviour of an Assembly of Rotund, Rigid, Cohesionless Particles. II. Proceedings of the Royal Society of London. Series A. Mathematical

Open access