The band structure of AlSb, GaSb, ZnTe and CdTe is calculated using the empirical pseudopotential method (EPM) coupled with spin-orbit (SO) splitting. We applied our empirical model of bulk modulus with SO effect. It has been noticed that SO has a crucial effect on the band structure of these compounds but does not influence the structural phase transition. The calculated results are in good agreement with the experimental data.
Damian Wojcieszak, Michał Mazur, Joanna Indyka, Aleksandra Jurkowska, Małgorzata Kalisz, Piotr Domanowski, Danuta Kaczmarek and Jarosław Domaradzki
Titanium dioxide thin films were prepared using two types of magnetron sputtering processes: conventional and with modulated plasma. The films were deposited on SiO2 and Si substrates. X-ray diffraction measurements of prepared coatings revealed that the films prepared using both methods were nanocrystalline. However, the coatings deposited using conventional magnetron sputtering had anatase structure, while application of sputtering with modulated plasma made possible to obtain films with rutile phase. Investigations performed with the aid of scanning electron microscope showed significant difference in the surface morphology as well as the microstructure at the thin film cross-sections. The mechanical properties of the obtained coatings were determined on the basis of nanoindentation and abrasion resistance tests. The hardness was much higher for the films with the rutile structure, while the scratch resistance was similar in both cases. Optical properties were evaluated on the basis of transmittance measurements and showed that both coatings were well transparent in a visible wavelength range. Refractive index and extinction coefficient were higher for TiO2 with rutile structure.
H. Koralay, O. Hicyilmaz, S. Cavdar, O. Ozturk and A.T. Tasci
have been analyzed.
In the present work, variation in thermal and structuralproperties of the glass-ceramic Bi 1.8 Sr 2 Ca 2 Cu 3.2-x Zn x O 10+δ system (x = 0, 0.1 and 0.5) with various Zn doping levels have been studied.
One of common methods used for preparing ceramic materials is the glass-ceramic method. Therefore, in this study, the amount of copper in the BSCCO system was reduced by zinc doping using the glass-ceramic method. High purity Bi 2 O 3 , SrCO 3 , CaCO 3 , CuO and ZnO powders were used as starting materials in the
Ayaz Arif Khan, M. Javed, A. Rauf Khan, Yousaf Iqbal, Asif Majeed, Syed Zahid Hussain and S.K. Durrani
Nanocrystalline NiFe2O4 particles were prepared by conventional sol-gel, citrate-nitrate sol-gel combustion and co-precipitation methods. The synthesized samples were annealed at 1000 °C for two hours and structural, chemical, morphological, optical and magnetic properties of nickel ferrite were investigated. The structural properties were investigated by X-ray diffraction (XRD) technique which confirmed the formation of single phase NiFe2O4 particles derived by the three methods. The chemical properties were analyzed by Fourier transform infrared (FT-IR) spectroscopy which confirmed the corresponding vibration modes in the samples. The optical properties were studied by UV-Vis spectroscopy. The morphological study of the as-synthesized samples was carried out by scanning electron microscopy (SEM). SEM images showed the agglomerated nanoparticles of NiFe2O4. The magnetic properties were investigated by vibrating sample magnetometer (VSM), which showed that the calcined samples exhibited typical magnetic behavior.
Olivier Baudon, Julien Bensmail, Florent Foucaud and Monika Pilśniak
A connected graph G is said to be arbitrarily partitionable (AP for short) if for every partition (n1, . . . , np) of |V (G)| there exists a partition (V1, . . . , Vp) of V (G) such that each Vi induces a connected subgraph of G on ni vertices. Some stronger versions of this property were introduced, namely the ones of being online arbitrarily partitionable and recursively arbitrarily partitionable (OL-AP and R-AP for short, respectively), in which the subgraphs induced by a partition of G must not only be connected but also fulfil additional conditions. In this paper, we point out some structural properties of OL-AP and R-AP graphs with connectivity 2. In particular, we show that deleting a cut pair of these graphs results in a graph with a bounded number of components, some of whom have a small number of vertices. We obtain these results by studying a simple class of 2-connected graphs called balloons.
p-f mixing on the structuralproperties of these compounds. The rare-earths have different occupation numbers for the shallow inner 4f shell. Due to the unfilled 4f shells of rare-earth atoms, it is a challenging problem to obtain an accurate theoretical description of the electronic structure of the rare-earth compounds. Because of the highly localized nature of the 4f electrons, direct f-f interactions between neighboring rare-earth atoms are generally considered to be nearly negligible  . The present pnictides (XBi; X = Am, Cf) exhibit six-fold coordinated
susceptibility suggesting the existence of local magnetic moments while the α phase shows a Pauli-like temperature independent paramagnetism [ 17 , 18 ]. It was noted that in the γ phase 4f electrons are localized whereas upon pressure they are more and more delocalized [ 19 ]. According to our best knowledge, it is not known whether similar situation could also take place in case of cerium in the Ce123 system.
In the present paper we extend the latter approach [ 6 ] to the structuralproperties of the hypothetical stoichiometric CeBa 2 Cu 3 O 7 system and present the
Bottom-up technique has been used to synthesize Ag-chalcogenide nanoparticles. This work reports on the synthesis of Ag2Se by varying the molar ratio of capping agent and pH of the solution. The synthesized nanoparticles have been characterized in terms of structural parameters using X-ray diffraction. By this technique, various parameters such as crystallite size, dislocation density and strain of the nanoparticles were calculated. The crystallite size decreased with the increase in pH of the solution. The optical characterization was carried out by UV-Vis-NIR spectrophotometer. With the decrease in the crystallite size, a blue shift in the absorption peak of the nanoparticles was observed. These properties are suitable for energy harvesting with the help of photovoltaics.
Zenon Sarbak, Grażyna Fabiś and Sławomir Binkowski
Structural and textural characterisation of NiMo catalysts supported on various zeolites
Structural and textural properties of nickel-molybdenum catalysts supported on four various type of zeolites of different chemical composition and porous structure have been studied by the methods of IR, XRD and the low-temperature sorption of nitrogen. The catalysts have been obtained by the two-stage impregnation of the supports with the solutions of nickel and molybdenum salts by the method of incipient wetness. The catalysts have been shown to preserve the structure characteristic of the appropriate zeolite supports.
CdS thin films with (1 1 1) orientation were prepared by chemical bath deposition technique at 80±5 °C using the reaction between NH4OH, CdCl2 and CS(NH2)2. The influence of annealing temperature varying from 150 °C to 250 °C was studied. X-ray diffraction studies revealed that the films are polycrystalline in nature with cubic structure. Various parameters, such as dislocation density, stress and strain, were also evaluated. SEM analysis indicated uniformly distributed nano-structured spherically shaped grains and net like morphology. Optical transmittance study showed the wide transmittance band and absence of absorption in the entire visible region. I-V characterization of p-Si/n-CdS diode and photoluminescence studies were also carried out for the CdS films.