Search Results

1 - 3 of 3 items

  • Author: Mariana Landová x
Clear All Modify Search

Abstract

The present contribution deals with the influence of tribological conditions on coating quality. Two types of coatings were selected for analysis WC-WB-CO and WC-FeCrAl, to advise that a new type of coating - carbide green. These coatings were applied to the base material AISI 316L of technology HVOF – High velocity oxygen fuel. The aim of the experimental study was to determine the quality coatings and its resistance to abrasive wear, depending on the number of thermal cycles. It was evaluated hardness, thickness, the resistance to abrasive wear in free abrasives and firmly bonded abrasives. Results of experiments showed a higher resistance of the coating WC-Co-WB.

Abstract

The article is aimed at evaluation of chosen properties of thermally sprayed coatings based on tungsten carbide. It was evaluated two types of coatings – WC-FeCrAl and WC-WB-Co. The coatings were deposited on basic material steel AISI 316L. The aim of experimental works was to determine the quality and resistance of coatings in corrosion environment depending on number of thermal cycles. The quality of coatings was evaluated by determination of their adhesion depending on thermal cycles, determination of microhardness and indentation fracture toughness. Coatings were exposed in tribo-corrosion conditions with the presence of 1% NaCl. The results of experimental showed a higher quality of coating WC-WB-Co.

Abstract

The paper presents results of research of the essential characteristics of two kinds of advanced coatings applied by HVOF technology. One studied coating: WB-WC-Co (60-30-10%) contains two types of hard particles (WC and WB), the second coating is eco-friendly alternative to the previously used WC-based coatings, called “green carbides” with the composition WC-FeCrAl (85-15%). In green carbides coating the heavy metals (Co, Ni, NiCr) forming the binding matrix in conventional wear-resistant coatings are replaced by more environmentally friendly matrix based on FeCrAl alloy. On the coatings was carried out: metallographic analysis, measurement of thickness, micro-hardness, adhesion, resistance to thermal cyclic loading and adhesive wear resistance (pin-on-disk test). One thermal cycle consisted of heating the coatings to 600°C, dwell for 10 minutes, and subsequently cooling on the still air. The number of thermal cycles: 10. The base material was stainless steel AISI 316L, pretreatment prior to application of the coating: blasting with white corundum, application device JP-5000.