Search Results

You are looking at 1 - 2 of 2 items for

  • Author: Anastasia Zhiravetska x
Clear All Modify Search
Open access

Pjotrs Trifonovs-Bogdanovs, Anastasia Zhiravetska, Tatjana Trifonova-Bogdanova and Konstantin Mamay

Abstract

Inertial system errors in case of using the new structural correction method have been determined. Inertial system errors, which determine the kinematic parameters of aircraft movement, are finally generated in the computing circuit. This is the part of inertial system structure which is presented as a closed loop with a feedback. The forward circuit of the main loop consists of several velocity and distance integrators connected in series. Accelerometer signal corrections are calculated in the feedback loop. New corrective circuits have been introduced to the inertial system structure. And the errors of the changed system have been determined. The structural corrective circuits got signals from exterior onboard navigation systems. The conducted research has shown that the use of structural corrective circuits in some cases leads to a considerable decrease of inertial system errors. It means that the new structural method of inertial system correction provides positive results. Further research of inertial system errors should be conducted for the case of its full structure.

Open access

Aleksandrs Gasparjans, Aleksandrs Terebkovs and Anastasia Zhiravetska

Abstract

A method of technical diagnostics of ship diesel engine – generator installation – is proposed. Spectral-power diagnostic parameters of the synchronous generator voltage and currents are used. The electric machine in this case is the multipurpose sensor of diagnostic parameters. A judgment on the quality of the operational processes in diesel engine cylinders and its technical condition is possible on the basis of these parameters. This method is applicable to piston compressor installations with electric drive. On the basis of such parameters as rotating torque, angular speed and angular acceleration it is possible to estimate the quality of the operating process in the cylinders of a diesel engine, the condition of its cylinder-piston group and the crank gear mechanism. The investigation was realized on the basis of a diesel-generator with linear load. The generator operation was considered for the case of constant RL load. Together with the above mentioned, the condition of bearings of synchronous machines, uniformity of the air gap, windings of the electric machine were estimated during the experiments as well. The frequency spectrum of the stator current of the generator was researched and analyzed. In this case the synchronous machine is becoming a rather exact multipurpose diagnostic sensor. The signal of non-uniformity in the operation process of diesel engine cylinders and its technical condition is the increasing of the amplitudes of typical frequencies.