The aim of the paper was to study and research the application of processing gas chromatographic method for the rapid and accurate determination of the composition of different types of oils, such as substances with the possibility of an adverse event spontaneous combustion or self-heating. Tendency to spontaneous combustion is chemically characterized mainly by the amount of unsaturated fatty acids, which have one or more double bonds in their molecule. Vegetable oils essentially consist of the following fatty acids: palmitic, stearic, oleic, linoleic, and linoleic. For the needs of assessment, the fire hazard must be known, in which the double bond is present, as well as their number in a molecule. As an analytical method, GCMS was used for determination of oils content. Three types of oil were used - rapeseed, sunflower, and coconut oil. Owing to the occurrence of linoleic acid C18:2 (49.8 wt.%) and oleic acid C18:1 (43.3 wt.%) with double bonds, sunflower oil is the most prone to self-heating. The coconut and rapeseed oils contain double bond FAME in lesser amount, and their propensity to self-heating is relatively low.
Bioethanol as a substitute for traditional sources of energy, especially oil transport, is currently one of the most researched alternative motor fuels. Normally, bioethanol is produced from agricultural crops such as sugar cane or corn. However, this is counter-productive, because agriculture is primarily serving to ensure enough food for the people. It is therefore necessary to look for new production of appropriate non-food crops or find an added value to this process. Utilisation of contaminated water from metal industry could be one of them. Based on the hypothesis of reduction of some toxic metals with higher oxidation number is opening the possibility of using this wastewater in alcohol fermentation of any kind of biomass. In this study, hexavalent chromium Cr(VI) was used as a model contaminant in the process of aerobic fermentation of corn to bioethanol. To determine the reduction potential of glucose to Cr(VI), and to quantitatively determinate the glucose content after saccharification, UV/VIS spectrophotometry was used. As a method of qualitative determination of fermentation product, gas chromatography with mass detection was used. Infrared spectrometry was used for qualitative analyses of produced ethanol. Based on the established results shown in this paper, we can conclude that the presence of hexavalent chromium in the fermentation process does not have a significant negative impact, while offering the opportunity of using the industrial wastewaters for the production of bioethanol fuel.
Nanomaterials are sure to take an important part in shaping the 21st century. Nevertheless, their increasing application in many fields of the industry also turns attention to the impact on health and environment. To achieve this goal, it is necessary to fully understand the influence of nanoparticles on the environment and the relevant safety issues.
The aim of the present review is to characterise the current state of regulation and legislation of nanomaterials, as well as the factors of safety assessment and their toxicity.
The paper deals with the process of thermal degradation of humic substances in soil samples exposed to increased temperature. To determine the basic properties of humic substances, humic and fulvic acids are used conventional fractionation chemical laboratory methods. To determine changes in the chemical structure, the method of use of FT-IR ATR spectroscopy technique.
Alica Bartošová, Maroš Soldán, Maroš Sirotiak, Lenka Blinová and Anna Michaliková
Fourier transform infrared spectroscopy was evaluated as an easy and simple analytical method for determination of starch residues after enzymatic hydrolysis. Different starch sources were liquefaction by α-amylase enzyme Termamyl SC for 25 minutes in autoclave. In the next step were starches solutions enzymatically hydrolysed by enzyme pollulanase Promozyme® for 24 hours to 60°C water bath. Total glucose in starch hydrolysate was determined using Fourier Transformed Infrared Spectroscopy (FTIR) with ATR accessory with diamante crystal by recording the absorption of different carbohydrate in spectral range from 700 - 4000 cm-1. Based on calibration curves of glucose the release of total glucose in hydrolysates was calculated.
Alica Bartošová, Lenka Blinová and Kristína Gerulová
Fourier transform infrared (FTIR) spectroscopy was used in this study to identify and determine spectral features of Chromochloris zofingiensis (Dönz) Fucíková et L.A. Lewis (SAG 211-14, Gottingen, Germany), Acutodesmus obliguus (Turpin) Hegewald (SAG 276-1, Gottingen, Germany) and Chlorella sorokiniana (K. Brandt) Pröschold et Darienko (SAG 211-40c, Gottingen, Germany). Polysaccharides and lipids from these three algae species were determined using Fourier Transformed Infrared Spectroscopy (FTIR) with ATR accessory with diamante crystal in spectral range from 400 – 4000 cm−1 and resolution 4.
The residue after brewing the spent coffee grounds is an oil-containing waste material having a potential of being used as biodiesel feedstock. Biodiesel production from the waste coffee grounds oil involves collection and transportation of coffee residue, drying, oil extraction, and finally production of biodiesel. Different methods of oil extraction with organic solvents under different conditions show significant differences in the extraction yields. In the manufacturing of biodiesel from coffee oil, the level of reaction completion strongly depends on the quality of the feedstock oil. This paper presents an overview of oil extraction and a method of biodiesel production from spent coffee grounds.
Maroš Sirotiak, Marek Lipovský and Alica Bartošová
In the research described in this paper, studied was sorption capacity of natural and ferric modification of zeolite tuff containing mineral clinoptilolite from the Nižný Hrabovec deposit to remove potentially toxic metals (ionic forms of chromium, nickel, copper and aluminium) from their water solutions. We reported that the Fe (III) zeolite has an enhanced ability to sorption of Cu (II), and a slight improvement occurs in the case of Cr (VI) and Ni (II). On the other hand, the deterioration was observed in the case of Al (III) adsorption.
Lenka Blinová, Alica Bartošová and Kristína Gerulová
Production of biofuel from renewable sources is considered to be one of the most sustainable alternatives to petroleum sourced fuels. Biofuels are also viable means of environmental and economic sustainability. Biofuels are divided into four generations, depending on the type of biomass used for biofuels production. At present, microalgae are presented as an ideal third generation biofuel feedstock because of their rapid growth rate. They also do not compete with food or feed crops, and can be produced on non-arable land. Cultivation conditions (temperature, pH, light, nutrient quantity and quality, salinity, aerating) are the major factors that influence photosynthesis activity and behaviour of the microalgae growth rate. In this paper, we present an overview about the effect of cultivation conditions on microalgae growth.
The paper discussed the issue of eutrophication. The most conspicuous effect of eutrophication is the creation of dense blooms of noxious, foul-smelling phytoplankton that reduce water clarity and harm water quality. Nutrient concentration, temperature and pH of the water largely influence the growth rate and composition of duckweed in general, but it can be said that the temperature and solar irradiation are the most important factors. In order to compare the rate of biomass increase of duckweed biomass in natural conditions and in a laboratory grown sample was analysed by spectrophotometric methods in UV/VIS region (Spectrophotometer GENESYSTM) for the selected nutrients such as ammonium, ammonium nitrogen, nitrite, nitrate, and phosphate.