Browse

You are looking at 1 - 10 of 950 items for :

  • Functional and Smart Materials x
Clear All
Open access

Fatemeh Mostaghni and Yasaman Abed

Abstract

In this study, we present a systematic study of linear and nonlinear optical properties of Para Red with the aim of Z-scan technique and quantum mechanical calculations. The Z-scan experiments were performed using a 532 nm Nd: YAG (SHG) CW laser beam. Para Red exhibited a strong nonlinear refractive index, nonlinear absorption coefficient and third-order nonlinear susceptibility 3.487 × 10-6cm2/W, 2.341 × 10-1cm/W and 2.157 × 10-4esu, respectively. Also, quantum chemical analysis was used for the calculation of the dipole moment μ, dipole polarizability α, anisotropy of polarizability ∆α and molecular hyperpolarizabilities (β,γ). The results revealed that Para Red has large first and second hyperpolarizabilities. However, from the obtained results, it was found that Para Red can be a promising material for applications in the development of non-linear optical materials.

Open access

Maxwell Selase Akple and Holali Kwami Apevienyeku

Abstract

A novel and low-cost synthesis of tungsten disulfide (WS2) transition metal dichalcogenide was carried out via gas-solid reaction in a horizontal quartz reactor. In this process, the prepared hollow WO3 precursor was sulfided with CS2 at 550 °C at different durations under N2 gas atmosphere. The as-prepared WS2 samples were formed by substitution of O by S during the sulfidation process. The characterization of these samples was performed employing X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET) specific surface area, X-ray photoelectron spectroscopy (XPS) and UV-Vis absorption spectroscopy. The characterization results showed that the as-prepared WS2 samples were of high quality and purity. No significant differences were observed in various WS2 samples synthesized during different sulfidation periods. The calculated results obtained from the density functional theory (DFT) indicate that WS2 has an indirect band gap of ca. 1.56 eV, which is in agreement with experimental band gap of ca. 1.50 eV. Combining the experimental and DFT results suggests that the novel method used in the synthesis of WS2 has a potential application for large scale production. The obtained WS2 are of high quality and can be implemented in photocatalysis, catalysis, photovoltaics, optoelectronic devices and photosensor devices.

Open access

Durga Verma, R. P. Patel and Mohan L. Verma

Abstract

In the present paper, TL and PL study of Dy3+doped Sr2SiO4:Eu2+phosphor is reported. A polycrystalline sample of Sr2SiO4:Eu2+, Dy3+ was prepared by combustion method. The obtained phosphor was characterized by powder X-ray diffraction, scanning electron microscopy, UV-Vis spectroscopy, PL and thermoluminescence. The results of the XRD studies obtained for Sr2SiO4:Eu2+, Dy3+ phosphor revealed its monoclinic structure. The average crystallite size was calculated as 12.77 nm. Thermoluminescence study was carried out for the phosphor using UV irradiation and a single glow peak was found. The thermoluminescence glow curves of the samples were measured at various concentrations of co-dopant. The kinetic parameter has been calculated using Chen’s glow curve method. In this paper, the photoluminescence and afterglow behavior of these phosphors are reported.

Open access

Ali A. Aljubouri, Abdulqader D. Faisal and Wafaa K. Khalef

Abstract

Single phase, adherent films of copper oxide nanowires (CuO NWs) were successfully grown on a glass substrate. Titanium nanofilm was pre-coated on the glass substrate to assist the growth of a layer adherent to the substrate. The copper film of 1.5 μm thickness was deposited via physical vapor deposition technique followed by thermal oxidation in air at various temperatures for 4 h. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible (UV-Vis) and Fourier transformation infrared (FT-IR) spectroscopy to find the crystal structure, morphology, phases, and optical properties of the deposited films. The CuO NWs film with 60%transmittance at wavelengths greater than 800 nm was obtained. It can be used as an infrared thermal imaging filter and in optoelectronic devices. The fabricated temperature sensor exhibited high sensitivity in the temperature range of 20 °C to 180 °C.

Open access

D. Morozow, J. Narojczyk, M. Rucki and S. Lavrynenko

Abstract

In the paper, the issue of the cermet cutting tools wear resistance was addressed. The tool inserts made out of cermet composites were exposed to the ion implantation with ions of nitrogen N+ and with combination of nitrogen N+ and aluminum Al+ ions. In order to assess the impact of the ion implantation, the samples of stainless steel EZ6NCT25 were turned with the standard cutting tools and with the inserts after ion implantation. The results in general confirmed better wear resistance of the ion implanted inserts. In particular, they performed 20-40% smaller friction. After some time, when the destruction of the implanted surface layer took place, the friction coefficient rose up to the value typical for non-implanted inserts. For the implanted inserts, the wear index VB appeared to be lower, and even visual assessment revealed distinguishably smaller wear than in case of tools without ion implantation.

Open access

Aseel A. Kareem

Abstract

Polyimide/polyaniline nanofiber composites were prepared by in situ polymerization with various weight percentages of polyaniline (PANI) nanofibers. X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), proved the successful preparation of PANI nanofiber composite films. In addition, thermal stability of PI/PANI nanofiber composites was superior relative to PI, having 10 % gravimetric loss in the range of 623 °C to 671 °C and glass transition temperature of 289 °C to 297 °C. Furthermore, the values of the loss tangent tanδ and AC conductivity σAC of the nanocomposite films were notably higher than those of pure polyimide. The addition of 5 wt.% to 15 wt.% PANI nanofiber filler enhanced the activation energy of PI composites from 0.37 eV to 0.34 eV.

Open access

Esra Yildiz

Abstract

In the present study, ZrO2co-doped with Gd3+/Sm3+and Gd3+/Er3+ions have been synthesized using Pechini method. Phase composition, morphology and photoluminescence properties of the synthesized phosphors were investigated by using X-ray powder diffraction (XRD), differential thermal analysis/thermal gravimetry (DTA/TG), scanning electron microscopy (SEM) and photoluminescence spectrofluorometer (PL). After heating at 1200 °C, XRD revealed that the phosphors were crystallized as monoclinic and tetragonal multiphases. SEM images indicated that the phosphors consist of fine and spherical grains with a size around 200 nm to 250 nm. Luminescence studies of these phosphors have been carried out on the emission and excitation, along with lifetime measurements

Open access

Talat Zeeshan, Safia Anjum, Hina Iqbal and Rehana Zia

Abstract

A series of copper substituted cobalt chromium ferrites, CuxCo1 - xCr0.5Fe1.5O4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) has been synthesized, by employing powder metallurgy method. Calcination of the samples has been carried out for 24 hours at 1100 °C. The resultant materials have been investigated by using a variety of techniques, including X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM)), scanning electron microscopy (SEM), and ultraviolet visible spectroscopy (UV-Vis). The XRD patterns confirmed that all compositions had a cubic spinel structure with a single phase and the lattice parameter was found to increase with increasing copper concentration. FT-IR spectroscopy has been used for studying the chemical bonds in the spinel ferrite. Shifting of the bands ν1 and ν2 has been observed. It has been revealed from VSM analysis that saturation magnetization and coercivity decrease with rising the Cu+2 doping. Magnetic properties have been explained on the basis of cation distribution. Scanning electron microscopy (SEM) has been used to study the surface morphology of prepared samples. UV-Vis analysis revealed the optical absorption of the samples. An increase in band gaps has been observed with increasing copper concentration in the sample.

Open access

A. Adamkiewicz and A. Waliszyn

Abstract

This article indicated at erosion as one of the causes of degradation of surfaces washed by fluids and conditions of its occurrence. Corrosive – erosive theory of metal surface degradation has been discussed linking it with an instance of destructive processes taking place in cylinder liner blocks of combustion engines. Physics and conditions influencing processes on liquid – washed operational surface phase boundary have been justified. Out of the contemporary hypotheses explaining the physics of cavitation erosion, the bubble theory has been considered. A mathematical model of erosion has been presented in the context of cavitation implosion energy determining crash interactions of liquid cumulative fluxes on the washed surface. Occurring plastic deformations have been graphically explained linking them with the occurrence of fatigue micro-cracks and later with erosive pits. Influence of initial steel hardness on intensity of cavitation erosion has been checked. Discussion of ways to increase metal surface resistance to cavitation erosion has been carried out.

Open access

Nouman Rafiq, Waqar A.A. Syed, Aulia Rifada, M. Asad Ghufran, Ijaz-Ur-Rehman Shah, Ahsan Ali and Wiqar Hussain Shah

Abstract

We report a simple approach for synthesizing monodispersed, crystalline and size-tunable tin sulfide nanoparticles for environment friendly next generation solar cell applications. Both SnS and SnS2 nanoparticles could be a potential nanomaterial for solar cells. The structural, morphological, thermal and optical properties were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), diffuse reflectance spectroscopy (DRS) and Fourier transform infrared spectroscopy (FT-IR). The XRD spectra revealed hexagonal and orthorhombic phases of SnS and SnS2 nanoparticles, respectively, where the grains size ranged from 11 nm to 30 nm. The weight percentage as a function of temperature was determined using TGA analysis. Functional groups were observed by FT-IR. The energy bandgap was determined as 1.41 eV showing usefulness of the nanoparticles in next generation environmental friendly solar energy applications.