Browse

1 - 10 of 360 items :

  • Energy Engineering x
  • Sustainable and Green Chemistry x
Clear All
Adsorption of Ciprofloxacin from Aqueous Environment by Using Synthesized Nanoceria

Abstract

Antibiotics are widely detected emerging contaminants in water environments and possess high potential risks to human health and aquatic life. However, conventional water treatment processes cannot remove them sufficiently. To develop innovative nanoadsorbents for effectively remove antibiotic contaminants from water environment, nanoceria were prepared via in situ precipitation method, and evaluated their adsorption capacity for a model antibiotic, ciprofloxacin (CIP). The properties of the prepared nanoceria were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and vibration sample magnetization (VSM). The effect of various operating parameters such as pH, initial CIP concentration, contact time, and adsorbent dosage on adsorptions of CIP were studied in batch experiments. Maximum adsorption capacity of the nanoceria was 49.38 mg/g at the conditions of pH 5, initial CIP concentration of 200 mg/dm3 and adsorbent dosage of 0.2 g/dm3, when 95.43 % of the CIP was removed. For adsorption kinetics, both pseudo-first-order and pseudo-second-order models can well describe the experimental data, indicating that the adsorption process was controlled by both physical diffusion and chemical interaction. For adsorption isotherms, the Freundlich model could fit the experimental data better than the Langmuir and Temkin models, suggesting a multilayer adsorption process. The thermal dynamics study showed the absorption process was spontaneity, exothermic, and irreversible. Finally it was concluded that the nanoceria can be used effectively for CIP removal.

Open access
Characteristics of Acute Toxicity Dynamics of Selected Toxicants on Aquatic Crustaceans

Abstract

Determining the value of a half-effective or half-life concentration or dose of toxicant is the main purpose of acute toxicity studies, and this is also the most commonly used value in the toxicity characteristics of substances. By conducting tests that meet the criteria and requirements for the determination of acute toxicity, due to the use of appropriate mathematical tools and concentrations resulting in complete lethal effects in the studied groups, considerably more important values can be achieved, which give a possibility for the analysis of the entire process’s dynamics, as well as determining the threshold values of the effect time and toxicant concentration. This was the purpose of our research, in which the research species were Daphnia magna and Cypris pubera. The effect of the conducted research allowed to determine and compare the two toxicants: ammonium and copper(II) ions by it’s: concentration limit values (C th), internal toxicity of the receptor-ligand complex (α), apparent, constant disintegration of this complex (K app) and different time values of the effect (Tt, Tin, MLT), which, along with concentration, is equally important determinant of the development of a toxic effect.

Open access
Chromatographic Examinations in the Gas Network Odourised by Tetrahydrothiophene

Abstract

The paper presents the results of the spread of the tetrahydrothiophene (THT) - used as odourant - in the gas network. Such analyses allow quick detection of leaks in networks, systems and devices of gas supply directly to consumers. The main goal of the study was to determine the effectiveness of the use of portable chromatograph and comparing it with a stationary odourant concentration analyser. Based on these studies, an attempt to determine the odouration zone for the selected city have been also taken. For this purpose, three series of measurements were made - in each series 13 points were analysed. Obtained results confirmed the effectiveness of the measurement a concentration of odourant in the gas network using a portable gas chromatograph - difference in relation to the stationary chromatograph ranged from 1.91 to 2.55 %.

Open access
Economic Analysis: Trickling Filter/Activated Sludge or Nitrifying Trickling Filter/Activated Sludge?

Abstract

The performance and economic simulation and modeling are crucial for accurate and rapid designing, construction, and forecasting future economic needs of municipal wastewater treatment plants (MWWTPs). In this study, combined nitrifying trickling filter/activated sludge (NTF/AS) process was suggested for the modernization of a MWWTP and the performance and economics of MWWTPs based on the combined TF/AS process and combined NTF/AS process were analyzed and compared. In real, the performance, total project construction, total operation labor, total maintenance labor, total material, total chemical, total energy, and total amortization costs of these proposed MWWTPs were calculated and compared. Under the used design criteria and operational conditions in this study, the project construction cost of the MWWTP based on TF/AS was 15.25 % higher than that of the MWWTP based on NTF/AS. Also, MWWTP based on NTF/AS was cost effective and the material and amortization costs for both plants were higher in comparison with the operation, maintenance, energy, and chemical costs. It is necessary to note that this study is a computer simulation for a case and drawing general conclusions only on the basis of this simulation may be insufficient.

Open access
Environmentally Friendly Fuel Usage: Economic Margin of Feasibility

Abstract

In the world there are two main problems concerning energy and ecology. Despite the crude oil price fluctuation, it has tended to increase. Moreover fossil fuel burning emits hazard compounds, including greenhouse gas. To solve them alternative fuels for vehicle have to be used. In due to properties, their usage impacts on the engine efficiency. The alternative fuel usage needs additional investment costs on the vehicle engines adaptation and fuel supply infrastructure. So, decisions must be based on mathematical apparatus. Three submodels were used in the suggested mathematical model: energy and economic indicator for fuels; energy and economic indicator for vehicles; criteria for investment projects. As a criterion of investment projects the profitability index has been grounded. The mathematical model and the algorithm for determining the feasibility of the alternative fuel utilization have been developed. The proposed algorithm includes the following stages: calculation of the fuel energy cost; calculation of the criteria for vehicles; determining the maximum value of investments; making decisions. Biofuels and gaseous fuels for some countries have been studied. The economic attractiveness of the alternative transport fuels has been presented. According to mathematical modeling, gaseous fuels are more economically attractive compared with liquid biofuels. Among gaseous fuels, LPG has a higher economic efficiency. The economic margin of alternative fuel application feasibility has been determined.

Open access
Impact of Different Packaging Systems on Selected Antioxidant Properties of Frozen-Stored Broccoli

Abstract

Broccoli has a very good nutritive value, high antioxidant activity and pro-healthy potential. Freezing is one of best methods for vegetable storage and broccoli belongs to the group of vegetables subjected to this process on an industrial scale. This work investigates the effect of type of container: low density polyethylene (PE-LD) bags and oriented polystyrene (OPS) boxes on selected quality parameters in frozen broccoli. The experimental material was the broccoli cultivar Lord F1. The vegetable was subjected to blanching, freezing and 3-month storage. At the every stage of an experiment the material was examined in terms of: vitamin C content; β-carotene; total polyphenols; and antioxidant potential, which was determined basing on the ability to quench the ABTS˙ + free radical. It has been found that vegetables which were kept frozen for 3 months in two types of container had parallel levels of vitamin C, β-carotene; total polyphenols; and similar antioxidative potential.

Open access
The Influence of Temperature Changes in Activated Sludge Processes on Ibuprofen Removal Efficiency

Abstract

The article presents results regarding the ibuprofen reduction rate at three various temperature values (8, 18 and 28 °C) which were conducted using a static test in accordance with the PN-C-04645 ‘Water and wastewater. Evaluation of partial biodegradation of anionic and non-ionic surface active substances. Initial test’ standard. A single study cycle including the analysis of ibuprofen degradation rate in specific temperature variants lasted 24 h. The activated sludge for tests was obtained from the aeration zone of a bioreactor localized in the Central Wastewater Treatment Plant in Poznan City (Poland), which was used for inoculation (1 g/dm3) of sterile samples with the medium and ibuprofen (10 mg/dm3) after appropriate pre-treatment (intense aeration for 5 h). The analysis procedure included the separation and concentration of analytes from biodegradation samples by means of solid phase extraction (SPE) and subsequent determination with high performance liquid chromatography coupled with mass spectrometry (LC-MS/MS) using an UltiMate 3000 RSLC liquid chromatogram (Dionex, USA) with a tandem API 4000 QTRAP mass spectrometer (Biosystem, MDS Sciex, USA). Both literature review as well as the conducted initial studies confirmed that the removal of ibuprofen proceeds more rapidly at higher temperature values. A higher retention rate also enhanced the reduction of ibuprofen concentration. A decrease of its concentration was observed after 24 h, which reached 40 and 50 % for temperature values of 8 and 18 °C, accordingly, whereas the highest reduction by approx. 65 % was noted at 28 °C.

Open access
New Approaches in Biological Wastewater Treatment Aimed at Removal of Organic Matter and Nutrients

Abstract

The article presents the developed anaerobic-aerobic wastewater treatment technologies. These technologies aimed at removing the organic matter, nitrogen and phosphorus by means of microorganisms immobilized on fibrous carrier surfaces. The results of the laboratory research show the high efficiency of milk wastewater treatment. The following degrees of reduction were achieved for the pollutant indicators: COD -86.7-93 %, total nitrogen - 96.9-97.9 %. Compared to the traditional treatment technologies applied in Ukraine, these values are high. The concentration of organic matters and biomass of not attached bacteria decreased in bioreactor chambers. When the purification process ends, a small amount of excess biomass remains; therefore, its self-oxidation and self-regulation occurs as a result of consumption by the organisms occupying higher levels of trophic chains. The use of anaerobic-aerobic bioreactors system for the treatment of wastewater enables achieving high outflow quality and prevents the suspended substances from slipping. Immobilization of microorganisms on the first stage of the technology prevents the formation of big amount of excessive sludge and removes biomass from the bioreactor, which allows the technology even for the heavily polluted wastewater. In reactors containing immobilized microorganisms, the organic matter compounds used in subsequent reactors for phosphate accumulation are split. The presented biotechnology saves electric energy, provides sufficient quality of treatment, and ensure the compliance of treated wastewater with the effluent standards.

Open access
Perspectives of Hydrogen Production from Corn Wastes in Poland by Means of Dark Fermentation

Abstract

A model for calculating the maximal theoretical production of hydrogen from corn wastes is proposed. The model has been used to estimate the potential for hydrogen production from cereals wastes such as wheat, barley, and corn which are cultivated in Poland. The potentials for Pomorze and other regions of Poland are compared. The hydrogen produced from cereal wastes in Poland could potentially meet 47 % of national hydrogen demand.

Open access
The Possibility of Contamination of Water-Soil Environment as a Result of the Use of Pig Slurry

Abstract

Pig slurry is a heterogeneous mixture of faeces, urine, undigested remains of feed items and water used for flushing of animal excrement and to maintain the proper hygiene of livestock housing. It is formed on farms which use the non-bedding system of pig breeding i.e. animals are kept on the partially or fully slatted floors. According to the Polish law pig slurry is defined as a liquid natural fertilizer intended for agricultural use. The storage and application of pig slurry on arable land affect the surroundings and may create a number of serious risks related to, among others, the pollution of water-soil environment with biogenic elements, heavy metals, pathogens and pharmaceuticals. The article presents the reasons for the occurrence of excessive amounts of nitrogen, phosphorus, copper, zinc and antibiotics in pig slurry. The possibility of microbial and pharmaceutical contamination of water, soil and plants as well as their pollution with biogens and heavy metals as a result of improper storage and excessive spreading of pig slurry have been characterized. Moreover, methods of preventing the above-mentioned threats with reference to Polish and EU legal acts have been discussed.

Open access