Browse

1 - 10 of 309 items :

  • Porous Materials x
  • Geosciences x
Clear All

Abstract

This article concerns the assessment of selected physical and mechanical properties of a dump soil. The dump soil is a specific soil with a very heterogeneous internal structure. Next to each other, there may be lumps and crumbs of cohesive soils mixed with non-cohesive soils accompanied by a very diverse admixture of organic substance. In addition, the soil in the waste dump, in spatial terms, may significantly differ in consistency and density. This is the result of the process of forming a dump soil, which takes place in three stages: excavation, transport and dumping. A heterogeneous soil deposited within the waste dump is subject to further processes: consolidation, compaction and creeping. Changes occurring in the course of these processes have a significant impact on the development of the properties of the dump soil.

Due to the large diversity of the tested soils, the results of their properties were divided into two groups, based on type and consistency of soil. This allows us to estimate the selected properties of the dump soil only on the basis of their macroscopic analysis.

Abstract

In this study, firstly, the behavior of a high steel frame equipped with tuned mass damper (TMD) due to several seismic records is investigated considering the structural and seismic uncertainties. Then, machine learning methods including artificial neural networks (ANN), decision tree (DT), Naïve Bayes (NB) and support vector machines (SVM) are used to predict the behavior of the structure. Results showed that among the machine learning models, SVM with Gaussian kernel has better performance since it is capable of predicting the drift of stories and the failure probability with R 2 value equal to 0.99. Furthermore, results of feature selection algorithms revealed that when using TMD in high steel structures, seismic uncertainties have greater influences on drift of stories in comparison with structural uncertainties. Findings of this study can be used in design and probabilistic analysis of high steel frames equipped with TMDs.

Abstract

This paper identifies the threats and risks of a terrorist attack on a critical infrastructure facility based on the example of Żelazny Most Tailings Storage Facility (OUOW). The threat analysis primarily took into account the threats of deliberate human actions. Identification of potential threats concerning the infrastructure surrounding the facility was conducted based on information that is readily available on the Internet. The reasons why it may be a potential target were also justified. Numerical calculations of the stress–deformation scale of the initial state of the reservoir, based on the Biot model with the Kelvin–Voight rheological skeleton, were presented as a starting point for in-depth research on the scale of threats and risks to the reservoir. The presented numerical model can be a starting point for calculating the stability of a reservoir subjected to explosives. The facility constitutes a major element of Lubińsko-Głogowski Okręg Miedziowy (Lubin-Głogów Copper District). OUOW Żelazny Most is the biggest such facility in Europe and is utilized to collect tailing waist. When expanded in its southern quarter, the facility will be the biggest in the world.

Abstract

Geogrids are widely used in civil engineering projects to reinforce road and railway structures. This paper presents research on the shearing strength of soil samples that have been reinforced with geogrids. The relationship between soil and geogrids is explored and evaluated by modeling the mechanical behavior of heterogeneous materials. For the purposes of this research, data obtained from tests of unreinforced sand samples with triaxial cells were compared with the data obtained from tests of reinforced sand samples. It was found that the shearing strength for reinforced samples was higher (from 9% to 49%) compared to unreinforced samples. Some damage to the geogrid was detected during the experiment, and for this reason, the same tests were numerically simulated for both unreinforced samples and samples reinforced with geogrids. Numerical simulations revealed the main reasons for damage to the geogrids during triaxial testing.

Abstract

The constantly growing, broadly understood, construction industry requires the use of a large amount of aggregates. The construction of roads, motorways, railway lines and hydrotechnical structures requires the use of aggregates of high quality, which is primarily determined by mechanical properties. The basic parameters describing mechanical properties of aggregates are the Los Angeles (LA) fragmentation resistance coefficient and the Micro-Deval (M DE) abrasion resistance coefficient. The LA and M DE coefficients depend mainly on the type of rock and its physical and mechanical properties. This has been thoroughly researched and documented as evidenced by the abundant literature in the field. However, the correlation between LA and M DE coefficients still gives rise to extensive discussions and some concerns. A number of publications demonstrate dependencies for various types of aggregates. Therefore, research was undertaken to present statistical analysis for one type of aggregate and one geological area.

This article presents the results of the fragmentation resistance test in the Los Angeles drum and the abrasion resistance test in the Micro-Deval drum of aggregates from Carpathian sandstone deposits. Aggregate samples were divided into three groups according to the location of the deposits and the tectonic unit from which they originated. The obtained results were subjected to static analysis to fit the best mathematical function describing the relationship between the two parameters.

Abstract

The issue of the stratification of the underground subsoil is one of the principal geotechnical challenges. The development of the Cone Penetration Tests (CPTu) has resulted in the possibility to record parameters in a quasi-continuous way, which provides a very detailed description of the soil response. Such accurate measurements may therefore be treated as a signal or image and be analysed as such. This paper presents the application of high-pass spatial filters to perform soil stratification on the basis of the static penetration test. The presented algorithm has been tested on the test data set provided by the Organizers of TC304 Student Contest on Spatial Data Analysis (September 22, 2019, Hannover, Germany). It provides reasonable results at negligible computational cost and is applicable to most soils, especially if the contrast between the parameters of the adjacent layers is significant.

Abstract

The paper discusses existing models used to estimate the thermal conductivity of the soil medium. The considerations are divided into three general sections. In the first section of the paper, we focus on the presentation of empirical models. Here, in the case of Johansen method, different relations for Kersten number are also presented. In the next part, theoretical models are considered. In the following part, selected models were used to predict measured thermal conductivities of coarse- and fine-grained soils, at different water contents. Based on these predictions as well as on the authors’ experience, a critical assessment of the existing models is provided. The remarks as well as advantages and disadvantages of those models are summarized in a tabular form. The latter is important from a practical point of view; based on the table content, one can simply choose a model that is suitable for the particular problem.

Abstract

The method of unconventional solid rock loosening with undercutting anchors and the literature analysis of the problem are presented. The tests and test results of the rocks loosening process with a fixed undercutting anchor are described. The tests were carried out within the RODEST project, OPUS 10 competition No. 2015/19/B/ST10/02817, financed by the National Science Centre. Numerical modeling process as well as a series of laboratory and in situ tests were carried out. The test stand equipment and methodology for the in situ tests are presented. The tests were conducted in four mines, which allowed to obtain and determine the following characteristics:

  1. loosening force as a function of anchoring depth (for a given type of rock),
  2. the range of rock loosening in a function of anchoring depth (for a given type of rock), and
  3. loosened rock volume as a function of anchoring depth (for a given type of rock).

The in situ test results are compared with the concrete capacity design (CCD) model used for the calculation of anchor load capacity in concrete.

Abstract

The design of shallow foundations on swelling soils needs a thorough study to evaluate the effect of swelling potential soil on the final foundation heave. For this reason, a simple analytical approach based on the soil stress state under the foundation can be used to calculate the foundation heave. This paper reports a set of analytical and numerical analysis using the finite-difference code (FLAC 3D), performed on an isolated shallow foundation founded on a swelling soil mass at N’Gaous city in Batna Province, Algeria, subjected to distributed vertical loads. Further, the influence of some parameters on total heave was analyzed, such as the embedded foundation and soil stiffness. The analysis results from the proposed 3D modelling was compared and discussed with analytical results. The numerical results obtained show a good agreement with the analytical solutions based on oedometer tests proposed in the literature, and deliver a satisfactory prediction of the heave of the shallow foundations.

Abstract

In coastal regions, earthquakes caused severe damage to marine structures. Many researchers have conducted numerical investigations in order to understand the dynamic behavior of these structures. The most frequently used model in numerical calculations of soil is the linear-elastic perfectly plastic model with a Mohr-Coulomb failure criterion (MC model). It is recommended to use this model to represent a first-order approximation of soil behavior. Therefore, it is necessary to accommodate soil constitutive models for the specific geotechnical problems.

In this paper, three soil constitutive models with different accuracy were applied by using the two-dimensional finite element software PLAXIS to study the behavior of pile-supported wharf embedded in rock dike, under the 1989 Loma Prieta earthquake. These models are: a linear-elastic perfectly plastic model (MC model), an elastoplastic model with isotropic hardening (HS model), and the Hardening Soil model with an extension to the small-strain stiffness (HSS model).

A typical pile-supported wharf structure with batter piles from the western United States ports was selected to perform the study. The wharf included cut-slope (sliver) rock dike configuration, which is constituted by a thin layer of rockfill overlaid by a slope of loose sand. The foundation soil and the backfill soil behind the wharf were all dense sand. The soil parameters used in the study were calibrated in numerical soil element tests (Oedometer and Triaxial tests).

The wharf displacement and pore pressure results obtained using models with different accuracy were compared to the numerical results of Heidary-Torkamani et al.[] It was found that the Hardening Soil model with small-strain stiffness (HSS model) gives clearly better results than the MC and HS models.

Afterwards, the pile displacements in sloping rockfill were analyzed. The displacement time histories of the rock dike at the top and at the toe were also exposed. It can be noted that during the earthquake there was a significant lateral ground displacement at the upper part of the embankment due to the liquefaction of loose sand. This movement caused displacement at the dike top greater than its displacement at the toe. Consequently, the behavior of the wharf was affected and the pile displacements were important, specially the piles closest to the dike top.