Browse

1 - 10 of 1,167 items :

  • Materials Sciences, other x
Clear All
Thin film characterization of Ce and Sn co-doped CdZnS by chemical bath deposition

Abstract

Cerium and tin co-doped cadmium zinc sulfide nanoparticles (CdZnS:Ce)Sn were synthesized by chemical bath deposition method with a fixed concentration of Ce (3.84 mol%) and three different concentrations of Sn (2 mol % and 4 mol% and 6 mol%). They showed broad photoluminescence spectra in the visible region under the ultraviolet excitation with a wavelength of 325 nm. The photoluminescence emission peaks were obtained at 540 nm, 560 nm and 570 nm for CdZnS, CdZnS:Ce and (CdZnS:Ce)Sn thin films, respectively having different concentrations of Sn. It has been observed that the photoluminescence emission peak shifted to higher wavelength region with an increase in intensity by Ce doping and Ce–Sn co-doping. Further enhancement in luminescence peak intensity has been observed by increasing concentration of Sn in (CdZnS:Ce)Sn films. Average crystallite size, measured from XRD data, was found to be increased with increasing concentration of Sn. An increase in the concentration of Sn shifted the UV-Vis absorption edge toward the higher wavelength side. Energy band gap for undoped CdZnS and Ce–Sn co-doped CdZnS varied from 2.608 eV to 2.405 eV. The SEM micrographs of CdZnS and (CdZnS:Ce)Sn films showed the leafy-like and ball-like structures. The presence of Sn and Ce was confirmed by EDAX analysis.

Open access
Effect of thermal annealing on structural and optical properties of In doped Ge-Se-Te chalcogenide thin films

Abstract

Thin films of Ge10−xSe60Te30Inx (x = 0, 2, 4 and 6) were developed by thermal evaporation technique. The annealing effect on the structural properties of Ge10−xSe60Te30Inx (x = 0, 2, 4 and 6) films has been studied by X-ray diffraction (XRD). The XRD results indicate amorphous nature of the as-prepared films whereas crystalline phases in annealed films were identified. Structural parameters such as average crystallite size, strain, and dislocation were determined for different annealing temperatures. Effect of annealing on optical constants of prepared films has been explored using UV-Vis spectrophotometer in the wavelength range of 400 nm to 1000 nm. Various optical constants were determined depending on annealing temperature. It has been noticed that the film transparency and optical bandgap EG have been reduced whereas the absorption coefficient α and extinction coefficient k increased with increasing annealing temperature. It was found that the prepared samples obey the allowed direct transition. The reduction in optical bandgap with annealing temperature has been described by Mott and Davis model. Due to annealing dependence of the optical parameters, the investigated material could be utilized for phase change memory devices.

Open access
Structural and electrical properties of new core-shell silver poly(m-toluidine-co-2-bromoaniline) nanocomposites

Abstract

In this article, we report the synthesis and characterization of silver dispersed poly(m-toluidine-co-2-bromoaniline) copolymer synthesized by chemical oxidative polymerization method. The synthesized copolymer composites were subjected to different analytical characterization methods, such as FT-IR, UV, XRD, SEM, photoluminescence and electrical conductivity studies. All the polymer samples are found to be soluble in common organic solvents. UV absorption spectra show a red shift when silver nanoparticles are dispersed in the copolymer. The characteristic peaks observed in FT-IR spectra confirm the formation of the copolymer. XRD pattern reveals the crystalline nature of the copolymer composites and sharp peaks in the spectra confirm the presence of silver particles. The silver nanoparticles change the surface morphology in the form of perfect encapsulation. The electrical conductivity of the polymer composites is found to vary from 10−4 S/cm to 10−6 S/cm. PL study reveals the charge transfer between the copolymer and the silver particles.

Open access
Structure and performance optimization of phenol polyphosphazene grafted by 2,4-dinitroaniline containing small nonlinear optical molecules

Abstract

Electro-optic (EO) polymers, possessing high EO coefficient and low dielectric constant, are considered to be a new generation of nonlinear optical materials that have great application prospect in photo-communication, information storage, and data processing. The host-guest structure of EO polymers is the most typical one in this field. However, the phase separation during polarization between the host polymer and the guest nonlinear optical molecule (NLO) limits potential applications of the material. To solve the problem, a new synthetic method was designed in this paper. First, 2,4-dinitroaniline was grafted to phenol polyphosphazene by chemical method for polar improvement of the main chain. Then, another small NLO molecule was mixed into the polymer by physical method for further improvement of EO coefficient. The preparation process was studied and the structure of the product was characterized. The effects of different NLO mixing proportions and different polarizing temperatures on EO coefficient were investigated in details. Orientation stability of the sample was tested. Experimental results show that our products possess not only high EO coefficient but also good phase stability, which makes them good candidates for the application in information technology.

Open access
Investigation of Murine T-Cells and Cancer Cells under Thermal Stressors and 2D Slow Rotating System Effects as a Testbed for Suborbital Flights

Abstract

Research indicates that exposure to microgravity leads to immune system dysregulation. However, there is a lack of clear evidence on the specific reasons and precise mechanisms accounting for these immune system changes. Past studies investigating space travel-induced alterations in immunological parameters report many conflicting results, explained by the role of certain confounders, such as cosmic radiation, individual body environment, or differences in experimental design. To minimize the variability in results and to eliminate some technical challenges, we advocate conducting thorough feasibility studies prior to actual suborbital or orbital space experiments. We show how exposure to suborbital flight stressors and the use of a two-dimensional slow rotating device affect T-cells and cancer cells survivability. To enhance T-cell activation and viability, we primed them alone or in combination with IL-2 and IL-12 cytokines. Viability of T-cells was assessed before, during the experiment, and at the end of the experiment for which T-cells were counted every day for the last 4 days to allow the cells to form clear structures and do not disturb their evolution into various geometries. The slow rotating device could be considered a good system to perform T-cell activation studies and develop cell aggregates for various types of cells that react differently to thermal stressors.

Open access
Effect of macromolecular mass transport in microgravity protein crystallization

Abstract

To investigate the effect of macromolecular transport and the incorporation of protein aggregate impurities in growing crystals, experiments were performed on the International Space Station (ISS) and compared with control experiments performed in a 1G laboratory environment. Crystal growth experiments for hen egg-white lysozyme (HEWL) and Plasmodium falciparum glutathione S-transferase (PfGST) were monitored using the ISS Light Microscopy Module (LMM). Experiments were performed applying the liquid–liquid counter diffusion crystallization method using rectangular, optically transparent capillaries. To analyze the quantity of impurity incorporated into growing crystals, stable fluorescently labeled protein aggregates were prepared and subsequently added at different percent concentrations to nonlabeled monomeric protein suspensions. For HEWL, a covalent cross-linked HEWL dimer was fluorescently labeled, and for PfGST, a stable tetramer was prepared. Crystallization solutions containing different protein aggregate ratios were prepared. The frozen samples were launched on 19.02.2017 via SpaceX-10 mission and immediately transferred to a -80°C freezer on the ISS. Two series of crystallization experiments were performed on ISS, one during 26.02.2017 to 10.03.2017 and a second during 16.06.2017 to 23.06.2017. A comparison of crystal growth rate and size showed different calculated average growth rates as well as different dimensions for crystals growing in different positions along the capillary. The effect of macromolecular mass transport on crystal growth in microgravity was experimentally calculated. In parallel, the percentage of incorporated fluorescent aggregate into the crystals was monitored utilizing the fluorescent LMM and ground-based fluorescent microscopes.

Open access
The Analysis of Hospital Helicopter Landing Sites Location in Terms of their Vibroacoustic Impact

Abstract

According to the applicable regulations, in the case of a decision on the location of an investment consisting in the construction and commissioning of a helicopter landing field, it is necessary to carry out an environmental impact assessment. At the same time, due to the emission of noise related to the expected change of acoustic climate parameters, the indicators required under the applicable law related to building acoustics and also impact of vibration on the structure of buildings should be taken into account. The article discusses particular groups of issues related to the assessment of the impact of helicopter landing field on the environment and the hospital building. On the basis of the presented results of analyzes, a postulate concerning the necessity of introducing a comprehensive assessment methodology, including specific groups of issues, was formulated.

Open access
A Concept of Suborbital Scientific Mission and Technology Validation

Abstract

Suborbital platforms are one of alternatives for satellites. They offer cheaper access to space to perform broad range of scientific and technology R&D. One of suborbital platforms are sounding rockets, which are suitable for these applications. A concept of scientific mission utilizing the sounding rocket is presented by author in this paper. The novelty of this mission is the operational responsive launch approach, which presents the example of the mission which responds for payload user needs, not payload contest approach, which is often in scientific community competing for payload space in space agency sounding rocket launch campaigns. The main mission goal is to perform astronomical observation of NEO using IR/VIS telescope. The secondary goal is to qualify the instrument for use on astronomical satellite observatory and raise its technology readiness level from TRL 6 to TRL 8. The expected mission output is to gain scientific data on NEO object and perform new IR/VIS optoelectronic instrument technology validation.

Open access
Conformity of finished forming sieves for paper industry

Abstract

The sieves’ manufacturers that want to be competitive at the market must have the implemented quality control system. Different methods, based on taking the sample, which is a representative of the total quantity of the forming sieves production, are applied for evaluation of the sieve’s conformity. The basic characteristics of this type of the quality function are control, measuring and testing of the forming sieves’ properties at the end of the manufacturing process. The objective is to detect and separate the products that deviate from the set criteria, to remain in the factory, then to be repaired if possible or discarded in the opposite case and thus to prevent delivery of the defective sieves to the paper manufacturers.

Open access
Deposition time and annealing effects on morphological and optical properties of ZnS thin films prepared by chemical bath deposition

Abstract

Nanocrystalline zinc sulfide thin films were prepared on glass substrates by chemical bath deposition method using aqueous solutions of zinc chloride, thiourea ammonium hydroxide along with non-toxic complexing agent trisodium citrate in alkaline medium at 80 °C. The effect of deposition time and annealing on the properties of ZnS thin films was investigated by X-ray diffraction, scanning electron microscopy, optical transmittance spectroscopy and four-point probe method. The X-ray diffraction analysis showed that the samples exhibited cubic sphalerite structure with preferential orientation along 〈2 0 0〉 direction. Scanning electron microscopy micrographs revealed uniform surface coverage, UV-Vis (300 nm to 800 nm) spectrophotometric measurements showed transparency of the films (transmittance ranging from 69 % to 81 %), with a direct allowed energy band gap in the range of 3.87 eV to 4.03 eV. After thermal annealing at 500 °C for 120 min, the transmittance increased up to 87 %. Moreover, the electrical conductivity of the deposited films increased with increasing of the deposition time from 0.35 × 10−4 Ω·cm−1 to 2.7 × 10−4 Ω·cm−1.

Open access