Browse

You are looking at 1 - 10 of 786 items for :

  • Production Technology x
Clear All
Open access

Răzvan Gabriel Pămărac and Radu Emanuil Petruse

Abstract

In this paper we proposed to identify the optimum milling parameter required for finishing processes performed on 3Dprinted parts from ABS and PLA materials. We have identified the optimum milling parameters for a constant spindle speed of 3500 rot/min for face milling and profile contouring operations with different tools diameters. The study was performed on 3D printed specimens from ABS and PLA materials.

Open access

Zhanna Mingaleva, Nataliy Shaidurova and Vanessa Prajová

Abstract

The challenges and achievements of technological upgrading are traditionally discussed in the context of the of high-tech production. However, such areas as agriculture and food production demand no less modern scientific and technological achievements. The challenges of appropriate feeding the population remain relevant. The article focuses on the examinations of issues related to the possibilities of involving modern technological achievements for the development of Russian agriculture. The main scientific methods of research were bibliographic analysis, statistical and factor analysis, comparative analysis, methods of analogies. The factual basis for the research was the official data of the Federal State Statistic Service (Rosstat), the data of technoparks in Russia, the results of modern scientific research of foreign and Russian scientists. A conclusion on the feasibility of involving the scientific and productive capacity of Russian technology parks for technological upgrading of agriculture in Russia is based on the analysis of the activities of the organizations in the country's science and technology sector, first and foremost technoparks.

Open access

Ghețiu Teodor

Abstract

With the uptake of the IoT in the industrial domain, a whole new range of cyber-physical systems has emerged; Industry 4.0 is the title given to this technological domain of highly interconnected, data-rich systems. To aid the development of such systems, a range of reference architectures has been developed throughout the years. This paper reviews a number of recent reference architectures, detailing their essential traits as well as identifying aspects that need to be further explored in order to obtain reference architectures better tuned to generating cyber-physical social systems.

Open access

Robert Koteras, Michał Wieczorowski, Piotr Znaniecki and Natalia Swojak

Abstract

The purpose of the article is to show the practical side of reverse engineering.Many times during the process of optimizing parts, before we intervene in the tool that produces them, we want to makesure that the optimization will work in practice.For this purpose, currently, we often use 3D printers. Unfortunately, they introduce distortions of geometry to the printed prototyperesultingfrom the technology of its production.

Open access

Pavol Ťavoda, Ján Kováč and Zygmunt Ł Łukaszczyk

Abstract

The article deals with the research of operational reliability of forest felling machines with the method FMEA (Failure Mode and Effect Analysis) and its implementation for observed machines in the organization. Forwarders 810D by John Deere were chosen for this research. The research was realized in real operational conditions. Application of the FMEA method allows flexibility in case of unexpected situations and optimization of human potential abilities. FMEA tool is a tool preventing outages operational reliability and preventive tool for ensuring the maintenance of facilities. This paper explores and verifies the operational reliability theory in practical real-world conditions, resulting in a reduction in operating (variable) costs, minimization of failures and readiness and increased performance of observed machines.

Open access

Ladislav Karrach and Elena Pivarčiová

Abstract

The paper deals with the possibilities of using Data Matrix codes in production engineering. We designed and tested the computationally efficient method for locating the Data Matrix code in the images. The location search procedure consists of identification of candidate regions using image binarization, then joining adjacent points into continuous regions and also examining outer boundaries of the regions. Afterwards we verify the presence of the Finder Pattern (as two perpendicular line segments) and Timing Pattern (as alternating sequence of black and white modules) in these candidate regions. Such procedure is invariant to shift rotation and scale change of Data Matrix codes. The method we have proposed has been verified on a set of real industrial images and compared to other commercial algorithms. We are also convinced that such technique is also suitable for real-time processing and has achieved better results than comparable commercial algorithms.

Open access

Ján Turis, Pavel Beňo and Witold Biały

Abstract

The article deals with the experimental detection of the tribotechnical parameters for two different types of sliding bearings which are intended for operation without an additional lubrication due to the increasing requirements in ecology and environment. The dominant tribotechnical parameters of the self-lubricating bearing are the coefficient of friction and temperature. To determine these parameters, an experimental method was applied in this paper. The introductory part deals with materials of self-lubricating sliding bearings, their properties and usage. The experimental part consists of the evaluation of friction characteristics and geometric change of a surface after sliding pairs were being worn. Experimental examined sliding pairs comprise a sliding bearing and the shaft. The aim of this research was to determine the effect of radial force on tribotechnical parameters in order to predict the behavior of examined sliding bearings in real operating conditions.

Open access

N. Daniel Pop and Gabriela Crăciunaş

Abstract

In this article we studies BVP’s that can not be solved as P.V.I or BVP with Matlab solvers ODExx or BVPxx since the solutions do not have limit in 0. We propose a numerical algorithm based on Cubic-spline written in Maple 16 [4].

Open access

Tomasz Ireneusz Jedliński, Jacek Buśkiewicz and Paweł Fritzkowski

Abstract

Apart from the strength requirements, modern lighting pole designs have to meet a number of safety requirements in the event of collisions. The paper compares the experimental tests performed at the collision test track according to EN 12767 with the results of the numerical analysis carried out in Ansys LS-DYNA. The objective of the work is to prepare a new structure of a thin-walled lighting pole of steel which minimizes absorption of the kinetic energy of the vehicle and, simultaneously, its production costs are comparable to those of a standard pole. The tests were carried out at an impact speed of 100 km/h.

Open access

Najeeb Alam Khan and Sidra Khan

Abstract

This article presents the study of three-dimensional, stagnation flow of a Powell-Eyring fluid towards an off-centered rotating porous disk. A uniform injection or suction is applied through the surface of the disk. The Darcy law of porous disk for Powell-Eyring fluid is also obtained. The governing partial differential equations and their related boundary conditions are converted into ordinary differential equations by using a suitable similarity transformation. The analytical solution, of the system of equations is solved by using homotopy analysis method. The convergence region of the obtained solution is determined and plotted. The effects of rotational parameter, porosity of the medium, the characteristics of the non-Newtonian fluid and the suction or injection velocity on the velocity distributions is shown by graphical representation.