Browse

1 - 10 of 65 items :

  • Databases and Data Mining x
  • Computer Sciences x
  • Materials Sciences x
  • Geology and Mineralogy x
Clear All
Contribution to Understanding of Ore Fluids in the Zletovo Mine Based on Fluid Inclusion Data

Abstract

The Zletovo is lead–zinc (Pb–Zn) deposit, adjacent to the Plavica volcanic centre (R. Macedonia) with high-sulphidation and porphyry mineralisation. The analysis of fluid inclusions showed homogenisation temperatures in the range 335–145°C, which reflects phases of pulsation of hydrothermal solutions and defined into four groups from the lowest to the highest temperatures. The frequency of the homogenisation temperatures ranged from 265 to 125°C and with the most dominant from 245 to 225°C, from 225 to 205°C and from 145 to 125°C. Also, it was confirmed that hydrothermal ore-bearing solutions were defined as Na-Cl-type with range from 4.4 to 8.6 wt% NaCl equivalent. The latest stage salinities ranged from 3 to 12 wt% NaCl equivalent, where those from 10 to 12 wt% and from 6 to 8 wt% NaCl equivalent, prevailed. This suggests that hydrothermal solutions within analysed quartz grains were at final mineralizing phase. Density of fluid inclusions ranged from 0.7 to 0.95 g/cm3. Calculated pressures and paleo-depths of mineralisation ranged from 14 to 130 bar and from 0.6 to 0.8 km.

Open access
Estimation of Magnetic Contact Location and Depth of Magnetic Sources in a Sedimentary Formation

Abstract

The aeromagnetic data of Idogo, Southwestern Nigeria, have been used to study the lithology and to determine the magnetic source parameters within Idogo and its environs. Idogo lies between latitudes 6°30′N and 7°00′N and between longitudes 2°30′E and 3°00′E. The magnetic anomaly map, the regional geology, the analytic signal and the local wavenumber were used to identify the nature and depth of the magnetic sources in the region. Data enhancement was carried out to delineate the residual features relative to the strong regional gradients and intense anomalies due to the basin features. The estimated basement depth using the horizontal gradient method revealed depths ranging between 0.55 km and 2.49 km, while the analytic signal amplitude and local wavenumber methods estimated depth to the magnetic sources to range from 0.57 km to 4.22 km and 0.96 km to 2.43 km, respectively. Depth computations suggested the presence of both shallow and deep sources. The total magnetic intensity values ranged from 3.1 nT to 108.3 nT. The area shows magnetic closures of various sizes in different parts of the area trending West, with prominence at the centre and distributed East–West.

Open access
Geotechnical Terrain Models and Types of Instabilities in the Durmitor Flysch Complex

Abstract

The Durmitor flysch complex represents a specific formation both in lithological and engineering geological sense. In the engineering geological sense this lithological formation is characterized by anisotropic and heterogeneous geotechnical properties, which depend on the dominant members within each individual package, as well as their spatial position.The Durmitor flysch complex consists of five superposition bed packages, which are mutually substantially different in their lithological, hydrogeological and geotechnical properties. For the first time in geological literature, this paper distinguishes five types of terrain construction within the Durmitor flysch complex. Contemporary geodynamic processes and their character within the flysch formation are defined. Particular emphasis is put on landslides, which represent a contemporary geodynamic phenomenon with certain specificities.

Open access
High resolution airborne radiometric and magnetic studies of ilesha and its environs, southwestern Nigeria

Abstract

The study of the nature of distribution of natural radioelements in Ilesha and its environs with its geological structure has been studied using aeroradiometric data. Aeromagnetic data have also been subjected to three automated gradient techniques to delineate the sub-surface structure of the study area. From the study, it can be found that maximum values of “eU” (ppm) and “eTh” (ppm) fall within the branded gneiss, whereas the maximum value of K (%) falls within porphyritic granite regions. eTh had the highest radioactive content. The environmental dose rate of Ilesha was between 0.1817 and 3.9296 msv/yr. Although there were extreme values, but the mean dose rate was 0.522 ± 0.310 msv/yr (within acceptable safe limit of 1.0 msv/yr). eU/K, eU/eTh and eTh/K ratios were analysed for enrichment or depletion of radioisotopes. eU/eTh >1 showed uranium depletion, while eTh >2 showed eTh enrichment. The magnetic intensity values ranged from -79.41 to 140.93 nT. The horizontal gradient method (HGM) and analytic signal amplitude (ASA) revealed that depth to magnetic sources ranged from 0.478 to 4.112 km and 0.348 to 2.551 km, respectively, whereas local wavenumber (LWN) depth ranged from 0.478 to 5.48 km, which overestimated those compared using HGM and ASA functions. The apparent susceptibility ranged from -0.00325 to 0.00323 SI, showing that ferromagnetic and diamagnetic mineral ranges control apparent susceptibility in Ilesha.

Open access
Investigation of Land Use Types on Physical and Chemical Properties of Soil in a Basement Terrain

Abstract

We assessed the effect of different land use types on the physical and chemical properties of soil. We analysed three cases. Nine soil samples were taken at different depths (0–10, 10–20 and 20–30 cm) from three locations, namely, sawmill, dumpsite and market. Analyses were carried out to determine the influences on the physical and chemical properties of the soil. All the land types had considerably high sand contents, with minor silt and clay. Available phosphorus and the exchangeable bases were significantly (p ≤ 0.05) affected by land use and soil depth. Moisture content (p ≤ 0.05) was significantly affected by land use, while bulk density (p ≤ 0.01) was significantly affected by soil depth. Soil organic matter and carbon were also generally low in all three locations. Consequently, ameliorative land management practices have to be adopted to prevent nutrient loss and land degradation.

Open access
New Method of Visibility Network and Statistical Pattern Network Recognition Usage in Terrain Surfaces

Abstract

Many problems in the analysis of natural terrain surface shapes and the construction of terrain maps to model them remain unsolved. Almost the whole process of thematic interpretation of aerospace information consists of a step-by-step grouping and further data conversion for the purpose of creating a completely definite, problematically oriented picture of the earth’s surface. In this article, we present application of a new method of drawing 3D visibility networks for pattern recognition and its application on terrain surfaces. For the determination of complexity of 3D surface terrain, we use fractal geometry method. We use algorithm for constructing the visibility network to analyse the topological property of networks used in complex terrain surfaces. Terrain models give a fast overview of a landscape and are often fascinating and overwhelmingly beautiful works by artists who invest all their interest and an immense amount of work and know-how, combined with a developed sense of the portrayed landscape, in creating them. At the end, we present modelling of terrain surfaces with topological properties of the visibility network in 3D space.

Open access
Decarburization of the Carbon Steel C45 During Annealing in Air

Abstract

In production it is necessary to achieve conditions that lead to the minimum decarburization of a steel product’s surfaces. In this study, the hypo-eutectoid carbon steel C45 was annealed in air in the temperature range T a = 600–1100 °C. The annealing times were between t a = ½ h and t a = 2 h. Different decarburizations occurred in different microstructures: ferrite–pearlite (T a = 600 °C and 700 °C, T a < AC1, no visible decarburization); ferrite–austenite (T a = 760 °C, AC1 < T a < AC3, visible decarburization); austenite at the beginning, ferrite– austenite after the incubation period (Ta = 850 °C, AC3 < T a < 912 °C, visible decarburization); and austenite (T a= 950 °C and 1100 °C, T a> 912 °C, visible decarburization and overheating of steel). The edges were more prone to decarburization and to overheating. Stress relieving, normalizing and annealing before quenching of the steel C45 can be carried out in air.

Open access
Geochemical assessment of claystone deposits from the Patti Formation, Southern Bida Basin, Nigeria

Abstract

Geochemical studies of claystone deposits from the Patti Formation in the southern Bida Basin, north-Central Nigeria, were carried out on representative samples to determine the basin’s depositional conditions, provenance and tectonic setting. The localities within the study area included Gegu, Ahoko, Ahoko-Etigi, Omu and Idu.

Semi-quantitative phase analysis using the Rietveld method and X-ray powder diffraction data revealed that the claystone samples had prominent kaolinite with other constituents such as quartz, illite–muscovite, K-feldspar, pyrite, marcasite, anatase, rutile and gorceixite.

Enrichment of Al2O3, Ba, Th, Sr, Cr and La suggests that these elements are primarily controlled by the dominant clay minerals.

Geochemical parameters such as U, U/Th, Ni/Co, V/Cr and Cu/Zn ratios strongly implied that these claystones were deposited in an oxidising environment. Provenance deducing ratios for felsic, mafic and basic igneous rocks were compared. Al2O3/TiO2 ratio suggested intermediate to felsic rocks as the probable source rocks for the claystone samples; however, Y/Ni, Cr/V, La/Sc and Th/Sc ratios suggested a felsic progenitor. The tectonic discrimination diagram showed that the samples’ plot was within the region specified for passive margin-type tectonic setting.

Open access
Preliminary geophysical investigation for road construction using integrated methods

Abstract

Integrated geophysical methods have been used to investigate the competency of the subsoil. The geophysical surveys conducted involve very low-frequency electromagnetic (VLF-EM) and electrical resistivity (ER) methods (dipole-dipole). ABEM Wadi and Ohmega resistivity meter were used to acquire VLF-EM and ER data, respectively, along two traverses. Station interval of 5 m was used for the VLF-EM survey, while inter-electrode spacing for dipole–dipole was 10 m; the inter-dipole expansion factor (n) ranged from 1 to 5. KHFFILT software was used to generate VLF-EM profiles and pseudosection, while DIPRO software was used for ER. Results from the ER method revealed the pattern of resistivity variations within the study area. The low resistivity values (11–25 Ohm-m) observed at the southern part of the study area could be attributed to changes in clay contents and degree of weathering in the subsurface. The results from the VLF-EM investigation revealed the presence of near-surface linear geologic structures of varying lengths, depths and attitudes, which suggest probable conductive zones that are inimical to the foundation of the road subgrade.

Open access
The Universal Kriging Mapping of the Neogene EL-markers Rs5 and Δ, Northern Croatia

Abstract

The area of the Bjelovar Subdepression in Northern Croatia, which represents the southwestern part of Drava’s depression, has been analysed. More than 700 depth data were collected in a regular grid covering the existing structural maps of e-log markers Rs5, Z’ and Δ, with cells 2 x 2 km in size. For zonal assessment, Thiessen polygon method was used as introductory analysis preceding Kriging interpolation on regional scale. The emphasis was on OK and UK interpolation, their comparison and selection of most appropriate method for mapping. Crossvalidation results proved UK technique to be the most appropriate in mapping of e-log markers Rs5 and Δ, thus acquiring the most accurate maps so far of the analysed Neogene area.

Open access