Efficient increase in the content of available forms of elements in soil depends not only on their total content introduced to soil material, but also on the technology of its application. Technology consists of techniques and date of application as well as agronomic practices aimed at maintaining proper conditions for element transformations. The method of application of waste elemental sulfur and ground phosphate rock was assessed. Doses of 20 and 40 mg S as well as 40 and 80 mg P·kg−1d.m. were added to medium soil; 30 and 60 mg S as well as 60 and 120 mg P·kg−1d.m. were added to heavy soil. The soil samples were collected on the day of application of materials and after 15, 30, 60 and 90 days. The soil pH value decreased during the incubation. An increase in available sulfur content was observed in both soils after elemental sulfur application; the sulfur content in the medium soil depended on the dose of waste. The soils with the addition of a double dose of ground phosphate rock had the highest content of available phosphorus.
Marcin Natoniewski, Leszek Rydzak, Agata Wyciszkiewicz and Tomasz Guz
In recent years, a dynamic development of brewing has been observed. Increasingly, production of malt and beer takes place even in smaller industrial factories, breweries restaurants or at home. Extraction is a process applied in a variety of industries, including food production, as a way of extracting specific ingredients from their mixtures. As a result of this process, not only sugars, proteins, fats, enzymes, vitamins, colorants, fragrances and flavors, but also malt and hop extracts are being isolated. In the process of mashing, in which the malt ingredients are being extracted, many biochemical, physical and chemical changes take place. The aim of the study was to analyze the effect of the degree of fragmentation of pilsner type malt on the amount of extract obtained and the pH of the mash. It has been observed that the degree of malt fragmentation has a significant effect on the content of the extract in the mash: the more fragmented malt, the more malt extract in mash produced using the malt. It has also been found that the pH of the mash increases with the average particle size of malt.
Stanisław Parafiniuk, Marek Milanowski, Anna Krawczuk, Józef Sawa and Alaa Kamel Subr
Two tests were carried out to measure the standard flat fan nozzles wear during a specific period of an accelerated wear procedure. The first test aimed at getting 10% increase in the flow rate compared to the nominal flow rate, which is the threshold to replace the nozzles according to the nozzles testing standards. The second test was to wear the nozzles intensively (100 hours of accelerated wear), which represents the use of nozzles beyond the allowed threshold. The results showed that the flow rate reached 1.31 l·min−1 (equal to 10% increase) for the tested nozzles after 35 hours of the wear test. For the second test, the 10% increase of the flow rate was reached after approximately 30 hours. The wear rate reached 27.5% at the end of the test and this is 2.7 times more than the standardized threshold.
Electric cars represent a promising energy-and carbon-efficient alternative to internal combustion engine cars. However, as mobility behaviour is highly habitual, convincing people to switch from conventional cars to electric is challenging. In the following research, which was carried out in the past years in Slovenia, an attempt was made to determine what influences people’s buying habits and what would motivate them to buy an electric car. It appeared that the most relevant factor for not purchasing electric cars is, firstly, its overall too high price, and, secondly, short driving ranges. Different studies, as well as the results of the following research have revealed that there is no single measure which would dramatically increase the demand for electric cars. The solution is to combine different measures or strategies like Top – Down and Bottom – Up, where both the government and car industry should come across.
Paper describes the procedure for developing academic programs which are properly aligned to the requirements of the knowledge-based economy. The paper also addresses the continuous quality improvement (CQI) process with the CQI loop closing on the program level and the course level. This process is needed to make continuous adjustments to an academic program, so that the program is always aligned to the constantly-changing needs of the economy. Paper also discusses the system of mutual dependency between the academic program and external partnership like local industry, secondary schools, local government, local community, regional business incubator center, other educational institutions, alumni and industrial advisory council. The ongoing collaboration with external partners allows the program to prosper and grow.
Today’s market determinants and most importantly, very dynamically changing customer requirements significantly shortened the product life cycle. This situation reflects in companies by common extension of the assortment offered and personalised serial production. The result of a flexible approach to market changes is the implementation of LEAN concept, which, both in terms of management and production aims to develop efficiency within an organisation, which will then enable quick and dynamic response to changes in the environment. The popularity of LEAN concept (in management and production) among managers comes from its universality and a wide range of instruments used to maximise the use of existing potential. The main assumptions of LEAN concept are aimed at the maximum use of an organisation’s resources, defining the activities necessary to execute an order and identifying the areas generating losses and then minimising them and eventually eliminating. LEAN concept is based on flagship-main tools for identification and modernisation of processes, the difficulty in using them results from the need to recognise and select the most effective ones that meet the expectations of a given organisation. The article presents issues related to the first stage of implementing LEAN concept in a company’s structures, i.e. identification of opportunities and selection of appropriate tools.
The objective of the paper is to determine the size of human and objectified labour in selected specialist vegetable farms. The paper covered studies carried out in the area of southern Poland in 50 organic vegetable farms. Based on the detailed studies, the size and structure of work, and energy inputs used in the production process were determined. The highest inputs of labour per a unit of the production area and 1 tonne of a product were incurred in production of Cucurbita vegetables – 1883.1 and 547.74 man-hour, while the lowest of Solanacea vegetables – 342.8 and 7.11 man-hour. From among all analysed groups of plants, the highest energy inputs were incurred in cultivation of root and onion vegetables and they were three times higher than in traditional farms. Contrary, the lowest inputs were incurred in cultivation of brassica and Solanaceae vegetables.
Tomasz Ireneusz Jedliński, Jacek Buśkiewicz and Paweł Fritzkowski
Apart from the strength requirements, modern lighting pole designs have to meet a number of safety requirements in the event of collisions. The paper compares the experimental tests performed at the collision test track according to EN 12767 with the results of the numerical analysis carried out in Ansys LS-DYNA. The objective of the work is to prepare a new structure of a thin-walled lighting pole of steel which minimizes absorption of the kinetic energy of the vehicle and, simultaneously, its production costs are comparable to those of a standard pole. The tests were carried out at an impact speed of 100 km/h.
This paper reports the effect of the parboiling time on dehulled kernel out-turns (DKO) of African breadfruit seeds, and the most recent effort to upgrade an existing dehuller and its performance. Two common and readily available varieties – Treculia var. africana and var. inverse were used in the study. The seeds were parboiled for 0 (control), 2, 5, 8, 11 and 14 minutes and then dehulled. The result revealed that the parboiling time had a significant effect on the DKO of the two varieties of the seed. The DKO increased from 0 to 5 min of the treatment, after which it decreased considerably up to 14 min of the parboiling time. The obtained data were used to develop a non-linear quadratic regression model to predict the DKO as a function of the parboiling time. The performance evaluation of the breadfruit seeds dehuller revealed that it was significantly influenced by the variety.
Innovative activity of enterprises in Poland is mostly generated by European funds that concern boosting European regions based on its significant resources and new technologies. Polish enterprises development within innovations is based mainly on accumulating new products and new technologies that improve organization and increase sale of products and services. Papers presents research findings that concern problems resulting from the innovations implementing in Polish enterprises comparing with European results. There is presented European Innovation Index providing a comparative assessment of the innovation performance at the country level of the EU Member States and the Regional Innovation Scoreboard (RIS) that presents results of innovative activity in Polish and European enterprises including regional data from the Community Innovation Survey (CIS).