This article deals with the vibrations of a nonprismatic thin-walled beam with an open cross section and any geometrical parameters. The thin-walled beam model presented in this article was described using the membrane shell theory, whilst the equations were derived based on the Vlasov theory assumptions. The model is a generalisation of the model presented by Wilde (1968) in ‘The torsion of thin-walled bars with variable cross-section’, Archives of Mechanics, 4, 20, pp. 431–443. The Hamilton principle was used to derive equations describing the vibrations of the beam. The equations were derived relative to an arbitrary rectilinear reference axis, taking into account the curving of the beam axis and the axis formed by the shear centres of the beam cross sections. In most works known to the present authors, the equations describing the nonprismatic thin-walled beam vibration problem do not take into account the effects stemming from the curving (the inclination of the walls of the thin-walledcross section towards to the beam axis) of the analysed systems. The recurrence algorithm described in Lewanowicz’s work (1976) ‘Construction of a recurrence relation of the lowest order for coefficients of the Gegenbauer series’, Applicationes Mathematicae, XV(3), pp. 345–396, was used to solve the derived equations with variable coefficients. The obtained solutions of the equations have the form of series relative to Legendre polynomials. A numerical example dealing with the free vibrations of the beam was solved to verify the model and the effectiveness of the presented solution method. The results were compared with the results yielded by finite elements method (FEM).
Nanostructured CdO thin films have been prepared on glass substrates by spray pyrolysis technique using perfume atomizer from fresh and aged (1, 2, 3 and 4 days) precursor solutions. XRD studies confirm that all the films exhibit cubic crystal structure with a (1 1 1) preferential orientation. The preferential orientation factor f(1 1 1) increases with an increase in aging the period of precursor solution. The 2θ value of the (1 1 1) plane shifts towards lower Bragg angles with aging inferring an expansion in the lattice volume of the aged films. Increased crystallite size is observed for the 3-days aged film for which minimum strain and dislocation density values are obtained. Optical transparency increases with an increase in aging period of the precursor solution and the optical band gap exhibits a red shift from 2.48 eV to 2.32 eV. Minimum resistivity of 0.78 × 10−2 Ω·cm is observed for the CdO film prepared from 3-days aged solution. The obtained results infer that the CdO film prepared from 3-days aged solution exhibits better physical properties than the others.
Wojciech Gołębiowski, Grzegorz Zając and Artur Wolak
The paper presents results of research on selected physico-chemical parameters of engine oils from farm tractors based on the date of their change assumed by the user. 17 samples of used engine oil from farm tractors of various producers and with a varied exploitation course were analysed. Oils for research were collected during oil change, registering the service life of oil each time. They were obtained from service points that repair farm tractors in the region of Lublin Province. The studies were to verify whether a decision concerning oil change taken by tractor users after specific time of operation of an engine was good. Number of exceedings of the threshold values of parameters of engine oil which are responsible for correct lubrication were the basis for evaluation
Jaydeep Dogney, Payal Bhargava and Arvind Kumar Shrimali
To improve the reputation and customer loyalty, a benchmarking analysis is being carried out, which influences the perception of the service quality for banks. With the expansion of competitive interactions, the results can serve as a strategic tool to gain competitive advantage and customer satisfaction. Banks reveal the expectations and expectations of customers regarding the quality of selected services. The process creates and expands its reputation and builds customer loyalty. This research aims to compare the perception of the quality of four leading banks with logical comparisons.
The research of railway track surfaces is aimed at improving the quality of railway infrastructure and providing the chance of improving the safety of driving. Therefore, it is advisable to constantly monitor track surface, but the research itself is not innovative because it is based on a known procedure. The crucial element are the techniques that allow to delve into the sources of problems. The aim of the article is to use the selected instruments of quality management to analyze the causes of track twist at high (180 km/h) speed of driving. The analysis of the causes of track twist was done on the basis of results from the measurement of one kilometer track section of the Krakow Glowny - Medyka route, which was made by using the TEC measuring device in April 2018. It was inferred that it is impossible to reach 180 km/h without track twist. In order to identify the causes of track twist it was proposed to use the selected sequence of quality management instruments, i.e.: brainstorming, Ishikawa diagram and the 5Why method. The identified causes of track twist include the abrasion of rail, scratches and exploitation point. The analysis and conclusions drawn from it may be useful in the analysis of other problems in railway transport as well as production and service industries.
Jarosław Czarnecki, Marek Brennensthul, Włodzimierz Białczyk, Weronika Ptak and Łukasz Gil
The paper presents results of the research on traction properties of two tractor tyres used on two agricultural grounds. The first ground was a stubble and the second one cropland. The investigated tyres had the same structure (diagonal, with a traditional tyre tread but different external dimensions. The research was carried out in field conditions with the use of a stand aggregated with a farm tractor. Analysis covered traction efficiency, slide, towing power and power lost on the rolling resistance and wheel slide. Based on the obtained results it was concluded that on a ground with lower compaction, the values of power losses were higher and traction efficiency was lower. Moreover, it was proved that the value of the power lost for rolling resistance had a decisive impact on the values of traction efficiency
T. Lovasi, M. Kouril, T. Jamborova, J. Stoulil and S. Msallamova
Electrochemical chloride extraction from a reinforced concrete structure may be accompanied with an electrochemical injection of healing agents if such agents are positively charged and are able to migrate towards the activated reinforcement. Positive charge carried by nanoparticles or cathionic corrosion inhibitors might be the proper choice. Organic substances with a positive charge and their salts are mostly such inhibitors. The essential conditions for successful application of such corrosion inhibitors are their sufficient corrosion inhibition efficiency that was studied and evaluated and their stability of positive charge in chloride containing concrete pore solution.
Pure CdO nanopowder and CdO-Fe3O4 nanocomposite were synthesized by a cost effective chemical method, and the samples were characterized by XRD, SEM, TEM, FT-IR, UV-Vis-NIR and PL. Also, magnetic and photocatalytic properties of the synthesized samples were studied. XRD patterns of the composite confirm the presence of diffraction peaks related to both CdO and Fe3O4. EDX spectrum confirms the presence of the elements Cd, O and Fe in the composite. Peaks related to Cd–O and Fe–O bonds were observed respectively at 688 cm−1 and 592 cm−1 in the FT-IR spectrum. The paramagnetic behavior of pure CdO becomes ferromagnetic when coupled with Fe3O4. The composite exhibited a high photodegradation efficiency of 92.85 % against the degradation of methylene blue dye under visible light radiation.
The objective of the paper is to review the present state of knowledge on health threats that occur as a result of some thermal processing of food products. Depending on the type and properties of raw materials and conditions of processes, carcinogenic, mutagen and genotoxic substances may be formed out of them, which may be treated as a process contamination. They are produced in processing plants, where their content is obligatorily controlled and organic, as well as in the conditions of food production in gastronomic units and households. The paper emphasises the second area of food processing, in particular, house-holds and popularised grilling processes, where there are no other possibilities of control of the threat level and awareness of people who prepare food and consumers is insufficient. The paper presents the most often occurring hazardous compounds, the most important regulations and admissible limits of consumption, as well as principles of thermal processing in a safe manner, and possibilities of limiting the levels of those substances in products