Stress-Dilatancy for Soils. Part IV: Experimental Validation for Simple Shear Conditions

Open access

Abstract

This paper validates the frictional state theory using published experimental data from simple, direct and ring shear tests. Simple shear is treated as a special case of plane strain conditions. In order to define complete stress and strain, additional assumptions are made: in the direct shear and ring shear tests, simple shear is assumed to occur in the shear band. For Φo = Φ′cv = Φ′r, the stress-dilatancy relationship obtained from the frictional state theory is similar to the relationships proposed by Taylor and Bolton. Further experiments, especially those that use a hollow cylindrical shear apparatus, are necessary to fully validate the frictional state theory in simple shear conditions.

[1] ATKINSON J.H., LAN W.H.W., POWELL J.J.M., Measurement of soil strength in simple shear tests, Can. Geotech. J., 1991, 28, 255-262.

[2] BARDET J.P., PROUBET J., A Numerical Investigation of the Structure of Persistent Shear Bands in Granular Media, Geotechnique, 1991, 41, No. 4, 599-613.

[3] BAREITHER C.A., BENSON C.H., EDIL T.B., Reproducibility of direct shear tests conducted on granular backfill materials, Geot. Test. J., 2007, Vol. 31, No. 1, 84-94.

[4] BOLTON M.D., The strength and dilatancy of sands, Geotechnique, 1986, 36, No. 1, 65-78.

[5] BUDHU M., Simple shear deformation of sands, Ph.D. thesis, University of Cambridge, 1975.

[6] CERATO A.B., LUTENEGGER A.L., Specimen size and scale effects of direct shear box tests of sands, Geotechnical Testing Journal, 2006, Vol. 29, No. 6, 1-10.

[7] COLE E.R., The behaviour of soils in the simple shear apparatus. Ph.D. thesis, University of Cambridge, 1967.

[8] CUI L., O’SULLIVAN C., Exploiting the macro-and-microscale response of an idealised granular material in the direct shear apparatus, Geotechnique, 2006, 56, No. 7, 455-468.

[9] GUTIERREZ M., WANG J., Non-coaxial version of Rowe’s stress-dilatancy relation, Granular Matter., 11, 129-137.

[10] HOSONO Y., YOSHIMINE M., Liquafaction of sand in simple shear condition. Cyclic Behaviour of Soils and Liquafaction Phenomena, Triantafyllidis T. (ed.), Balkema, Rotterdam 2004.

[11] HOSONO Y., YOSHIMINE M., Liquafaction of sand in simple shear condition, Proc. of Int. Conf. on Cyclic Behaviour of Soils and Liquafaction Phenomena, Bohun, Germany, March 31th-April 2nd 2004.

[12] HONG NAM N., KOSEKI J., Modelling quasi-elastic deformation properties of sand, Deformation Characteristics of Geomaterials, IS - Lyon 2003, 275-283.

[13] JEWELL R.A., WROTH C.P., Direct shear tests on reinforced sand, Geotechnique, 1987, 37, No. 1, 53-68.

[14] LIKOS W.J., WAYLLACE A., GODT J., LU N., Modified Direct Shear Apparatus for Unsaturated Sands at Low Suction and Stress, Geotechnical Testing Journal, 2010, 33, No. 4, 286-298.

[15] LINGS M.L., DIETZ M.S., An improved direct shear apparatus for sand, Geotechnique, 2004, 54, No. 4, 245-256.

[16] LOPEZ-QUEROL S., COOP M.R., Drained cyclic behaviour of loose Dog’s Bay sand, Geotechnique, 2012, 62, No. 4, 281-289.

[17] LUZZANI L., COOP M.R., On the relationship between particle breakage and the critical state of sands, Soils and Foundations, 2002, Vol. 42, No. 2, 71-82.

[18] MILATZ M., GRABE J., A new simple shear apparatus and testing method for unsaturated sands. Geotech. Testing J., 2015, Vol. 38, No. 1, 9-22.

[19] MEEHAN C.L., BRANDON T.L., DUNCAN J.M., Measuring Drained Residual Strengths in the Bromhead Ring Shear, Geotechnical Testing Journal, 2007, 30, No. 6, 466-473.

[20] OCHIAI H., Stress condition within simple shear test specimen, Reports of the Faculty of Engineering, Nagasaki University, No. 12, February, 1979, 57-63.

[21] ODA M., On stress-dilatancy relation of sand in simple shear test, Soils and Foundations, 1975, Vol. 15, No. 2, 17-29.

[22] PALMEIRA E.M., MILLIGAN G.W.E., Scale Effects in Direct Shear Tests on Sand, Proc. of the 12th ICSMGE, 1989, Vol. 1, No. 1, 739-742.

[23] POTTS D.M., DOUNIAS G.T., VAUGHAN P.R., Finite element analysis of the direct shear box test, Geotechnique, 1987, Vol. 37, No. 1, 11-23.

[24] QIU Y.-Y., TATSUOKA F., UCHIMURA T., Constant Pressure and constant volume direct shear tests on reinforced sand, Soil and Foundations, 2000, 40, No. 4, 1-17.

[25] SASSA K., WANG G., FUKUAKA H., Performing Undrained Shear Tests on Saturated Sands in a New Intelligent Type of Ring Shear Apparatus, Geotechnical Testing Journal, 2003, 26, No. 3, 257-265.

[26] SCARPELLI G., WOOD D.M., Experimental observations of shear band patterns in direct shear tests, IUTAM Conference on Deformation and Failure of Granular Materials. Delft/31-Aug.-3 Sept. 1982, 473-484.

[27] SHIBUYA S., KOSEKI J., KAWAGUCHI T., Recent developments in deformation and strength testing of geomaterials, Deformation Characteristics of Geomaterials. Di Benedetto et al. (eds.), Taylor & Francis Group, London 2005, 3-28.

[28] SHIBUYA S., MITACHI T., TAMATE S., Interpretation of direct shear box testing of sands as quasi-simple shear, Geotechnique, 1997, 47, No. 4, 769-790.

[29] SHIPTON B., COOP M.R., On the compression behaviour of reconstituted soils, Soils and Foundations, 2012, 52, No. 4, 668-681.

[30] SMOLTCZYK U. ed., Geotechnical Engineering Handbook. Vol. 1: Fundamentals, Ernest & Sohn. A Wiley Company, Berlin 2002.

[31] SZYPCIO Z., Stress-dilatancy for soils. Part I: The frictional state theory, Studia Geotechnica et Mechanica, 2016, Vol. 38, No. 4, 51-57.

[32] SZYPCIO Z., Stress-dilatancy for soils. Part II: Experimental validation for triaxial tests, Studia Geotechnica et Mechanica, 2016, Vol. 38, No. 4, 59-65.

[33] SZYPCIO Z., Stress-dilatancy for soils. Part III: Experimental validation for the biaxial conditions, Studia Geotechnica et Mechanica, 2017, Vol. 39, No. 1, 73-80.

[34] TANG Y.X., HANZAWA H., YASUHARA K., Direct shear and direct simple shear tests results on Japanese marine clay, Pre-failure Deformation of Geomaterials. Balkema, Rotterdam 1995, 107-112.

[35] TAYLOR D.W., Fundamentals of Soil Mechanics, John Wiley & Sons, New York 1948.

[36] TAYLOR D.W., A direct test with drainage control, Symp. on Direct Shear Testing of Soils, ASTM Special Techn. Publ., 1952, No. 131, 63-74.

[37] WIJEWICKREME D., DABEET A., BYRNE P., Some Observations on the State of Stress in the Direct Simple Shear Test Using Discrete Element Analysis, Geotechnical Testing Journal, 2013, 36, No. 2, 292-298.

[38] WOOD D.M., Soil behaviour and critical state soil mechanics, Cambridge University Press, 1990.

[39] WU P.-K., MATSUSHIMA K., TATSUOKA F., Effects of Specimen Size and Some Other Factors on the Strength and Deformation of Granular Soil in Direct Shear Tests, Geotechnical Testing Journal, 2008, 31, No. 1, 45-64.

[40] YAN W.M., Particle Elongation and Deposition Effect to Macroscopic and Microscopic Responses of Numerical Direct Shear Tests, Geotechnical Testing Journal, 2010, 34, No. 3, 238-249.

Studia Geotechnica et Mechanica

The Journal of Wrocław University of Science and Technology and AGH University of Science and Technology

Journal Information

CiteScore 2017: 0.14

SCImago Journal Rank (SJR) 2017: 0.131
Source Normalized Impact per Paper (SNIP) 2017: 0.448

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 155 155 12
PDF Downloads 82 82 14