Brazilians mixtures containing asphalt rubber were evaluated by mechanical laboratory tests. A conventional mixture with asphalt CAP-50/70 was produced as a mixture control. With the aim of compare the Brazilians mixtures performance, a Portuguese asphalt rubber mixture was tested as well. The testing set involved the determination of the mechanical properties, fatigue and permanent deformation, of asphalt rubber produced by wet process through two different systems: continuous blend and terminal blend. The asphalt rubber morphology was evaluated in order to determine the compatibility of the systems. The asphalt rubber mixtures exhibit good resistance to permanent deformation and prolonged fatigue life in relation to mixture control. Therefore it is concluded that the application of asphalt rubber alters the characteristics of asphalt mixture in a very beneficial way.
 “ADOT construction manual”, Arizona Department of Transportation, Intermodal Transportation Division, Arizona, 2005.
 “The asphalt handbook” Asphalt Institute,, Manual Series nº 4 (MS-4), 1989 Edition, Kentucky, 1989.
 ARTAMENDI I., KHALID H., “Different approaches to depict fatigue of bituminous materials”, The 15th European Conference of Fracture, Advanced Fracture Mechanics for Life and Safety Assessments Proceedings, Stockholm, Sweden, 2004.
 “The use of recycled crumb rubber”, Austroads Pavement Research Group, APRG technical note 10, Australia, 1999.
 BAKER, T. E., ALLEN, T.M., JENKINS, D.V., MOONEY, T., PIERCE, L.M., CHRISTIE, R.A., WESTON, J.T., “Evaluation of the use of scrap tires in transportation related applications in the State of Washington”, Washington State Department of Transportation, Washington, D.C., 2003.
 “Asphalt rubber usage guide”, Caltrans,, State of California Department of Transportation. Materials and Testing Services, Office of Flexible Pavement Materials. Sacramento, California, USA, 2003.
 CNT, “Pesquisa rodoviária 2006 - relatório gerencial”, Confederação Nacional do Transporte, Brasília, Brasil, 2006.
 DANTAS NETO, S.A., FARIAS, M.M., PAIS, J.C., PEREIRA, P.A.A. “Influence of crumb rubber and digestion time on the asphalt rubber binders”, Road Materials and Pavement Design. vol 7, nº 2, 2006.
 “Cimentos asfálticos de petróleo”, DNIT, Especificação de material 095/2006, Departamento Nacional de Infra-Estrutura de Transportes, Diretoria de Planejamento e Pesquisa, Instituto de Pesquisas Rodoviárias, Rio de Janeiro, RJ, Brasil, 2006.
 “Pavimentos flexíveis - Concreto Asfáltico”, DNIT, Especificação de Serviço DNIT 031/2006 - ES, Departamento Nacional de Infra-Estrutura de Transportes, Diretoria de Planejamento e Pesquisa/IPR. Rio de Janeiro, RJ, Brasil, 2006.
 EISENMANN, J.; HILMER, A., “Influence of wheel load and inflation pressure on the rutting effect at asphalt-pavements - experiments and theorical investigations”, Proceedings, 6th International Conference on the Structural Design of Asphalt Pavements, vol. I, p. 392-403, Ann Arbor, 1987.
 GOSSAIN V., KAPOOR K., PROZZI J.A., “Testing the HB2060 pads: equivalent damage and fatigue Testing”, Report no. FHWA/TX-06/0-5372-1, Texas Department of Transportation. Research and Technology Implementation Office, Austin, Texas, USA, 2006.
 Greenbook, “Standard specifications for public works construction”, 2000 Edition, Anaheim, 2000.
 HANSON, D.I., FOO, K., “Evaluation and characterization of a rubber modified hot mix asphalt pavement”, National Center for Asphalt Technology, USA, 1994.
 HEITZMAN, M.A., “State of the practice - design and construction of asphalt paving materials with crumb rubber modifier”, Report FHWA A-SA-92-022. FHWA, USA, May, 1992.
 HICKS, R.G., “Asphalt rubber design and construction guidelines, volume I - design guidelines”, Northern California Rubberized Asphalt Concrete Technology Center (NCRACTC) and California Integrated Waste Management Board (CIWMB). Sacramento, California, USA, 2002.
 KANDHAL, P.S., “Waste materials in hot mix asphalt - an overview”, National Center for Asphalt Technology, NCAT Report no. 92-6, Auburn, Alabama, USA, 1992.
 MONISMITH, C.L., EPPS, J.A., KASIANCHUK, D.A., MCLEAN,, D.B., “Asphalt mixture behaviour in repeated flexure”, Report TE 70-5, University of California, Berkeley, 1971.
 PAIS, J.; PEREIRA, P.A.A.; PICADO-SANTOS, L.G., “Variability of laboratory fatigue life of asphalt mixes using four point bending test results”, International Journal of Pavements, vol. 1, nº2, p. 48-58, 2002.
 ROBERTS, F. L., P.S. KANDHAL, E.R. BROWN AND R.L. DUNNING, “Investigation and evaluation of ground tire rubber in hot mix asphalt”, NCAT Report 89-3, USA, 1989.
 SANTUCCI, L., “Rut resistant asphalt pavements”, Technology Transfer Program, Pavement Research Center at University of California Berkeley, Institute of Transportation Studies, California, USA, 2001.
 SOUSA, J. B., CRAUS, J., MONISMITH, C.L., "Summary report on permanent deformation in asphalt concrete," Strategic Highway Research Program, Report no. SHRP-A/IR- 91-104, Washington, D.C., 1991.
 SOUSA, J.B., SOLAIMANIAN, M., WEISSMAN, S.L., “Development and use of the repeated shear test (constant heigh): an optional Superpave mix design tool”, Strategic Highway Research Program, SHRP-A-698, Washington, DC, 1994.
 TAKALLOU, H.B.; SAINTON, A., “Advances in technology of asphalt paving material containing used tired rubber”, Transportation Research Record no. 1339, Washington, D.C., USA, 1992.
 TAYEBALI, A.A.; DEACON, J.A.; COMPLANTZ, J.S.; FINN, F.N.; MONISMITH, C.L., “Fatigue response of asphalt-aggregate mixes”, SHPP-A-404, CD Room, Strategic Highway Research Program, National Research Council, Washington, D.C., USA, 1994.
 VISSER A.T., VERHAEGHE B., “Bitumen rubber: lessons learned in South Africa”, Asphalt Rubber 2000 Proceedings, Portugal, p. 33-52 2000.
 WAY, G.B., “OFGC meets CRM: where the rubber meets the rubber: 12 years of durable success”, Asphalt Rubber 2000 Proceedings, Portugal, p. 15-32 2000.