Influence of aggregate gradation on hma mixes stability

Open access


The load transfer capacity of pavements is to a great extend influenced by aggregates. About 85% of the total volume of hot mix asphalt (HMA) mixtures consists of aggregates; thus, they are greatly influenced by aggregate properties like angularity (shape), roughness (texture), and gradation. Aggregate gradation controls the structure of voids. Current specifications for aggregate properties in HMA pavements require the aggregate blend to fall within a specified range of gradation values. Although the abovementioned requirement has ensured the construction of high quality HMA pavements, the properties are largely empirical and they are not based on performance-related tests. Marshall Stability is in principle the resistance to plastic flow of cylindrical specimens of a bituminous mixture loaded on the lateral surface. It is the load carrying capacity of the mix at 60oC. Aggregates with different gradations from the broader area of Xanthi, Northern Greece, have been used to prepare specimens for stability testing of hot asphalt mixtures in the laboratory. The research focused on the evaluation of the influence of aggregates in the overall stability characteristics of the mixtures. The maximum stability value has been obtained with an open-graded mixture having 5% asphalt and aggregate size 2.36 mm. However, the stability of the dense graded mixture is higher than this maximum value.

[1]. F.L. ROBERTS, P.S. KANDHAL, E.R. BROWN, D.Y. LEE, T.W. KENNEDY: “Hot mix asphalt materials, Mixture design, and construction”, National Asphalt Paving Association Education Foundation. Lanham, MD, 1996.

[2]. S.S. BHOSALE: “Strength evaluation of fiber reinforced hot mixed open graded asphalt concrete”. Proceedings of 8th International Conference on Geosynthetics, September 18-22, Yokohama, Japan, pp. 801-804, 2006.

[3]. P.S. KANDHAL, L.A. COOLEY: “The restricted zone in the Superpave aggregate gradation specification”, National Cooperative Highway Research Program Report 464, Washington D.C., Transportation Research Board, National Research Council, 2001.

[4]. K.J. KOWALSKI, R.S. MCDANIEL, A. SHAH, J. OLEK: “Long-term monitoring of noise and frictional properties of three pavements dense-graded asphalt, stone matrix asphalt, and porous friction course”, Transportation Research Record 2127, pp. 12-19, 2009.

[5]. F. LOUP, S. KRAFFT, J. DHERBECOURT: “NANOPHONE®: Innovative opengraded asphalt concrete 0/4mm for improving noise reduction”, 5th Eurasphalt & Eurobitume Congress, 13-15th June 2012, Istanbul, 10 p., 2012.

[6]. W.B. JR. KING, M.S. KABIR, S.B. JR. COOPER, C. ABADIE: “Evaluation of open graded friction course (OGFC) mixtures”, FHWA/LA.13/513 Report, 72 p, 2013.

[7]. A. ONGEL, J. HARVEY, E. KOHLER: “State of the practice in 2006 for opengraded asphalt mix design”, Technical Memorandum: UCPRC-TM-2008-07, 39 p, 2007.

[8]. CALTRANS: “Open graded friction course usage guide”, California Department of Transportation Sacramento, CA 95819-4612, 19 p., 2006.

[9]. S.S. BHOSALE, J.N. MANDAL: “Open graded asphalt concrete for mitigation of reflection cracking on asphalt concrete overlays”, The 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG) , pp. 4409-4416, 2008.

[10]. F. PEINADO, E. MEDEL, R. SILVESTRE, A. GARCIA: “Open-grade wearing course of asphalt mixture containing ferrite for use as ferromagnetic pavement”, Composites: Part B, vol. 57, pp. 262-268, 2014.

[11]. R.W. SMITH, J.M. RICE, S.R. SPELMAN: ―Design of open-graded asphalt friction courses‖, FHWA-RD-74-2 Report, Washington, D.C. 20590 Federal Highway Administration Offices of Research and Development Materials Division, 48 p., 1974.

[12]. L. KLINE, B. PUTMAN: “Comparison of open-graded friction course mix design procedures in the United States”, Transportation Research Board 90th Annual Meeting Paper No. 11-3747, 2011.

[13]. AMERICAN SOCIETY FOR TESTING AND MATERIALS: ―ASTM D1559: Test method for resistance to plastic flow of bituminous mixtures using Marshall Apparatus”, Annual Book of ASTM Standards 2000, Sec. 4 - Construction, Vol. 04.03, Road and Paving Materials; Vehicle - Pavement Systems, West Conshohocken, PA. ASTM International, 2000.

Romanian Journal of Transport Infrastructure

The Journal of Technical University of Civil Engineering Bucharest

Journal Information


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 386 243 11
PDF Downloads 119 84 6