Lignosulfonate and silica as precursors of advanced composites

Open access

Abstract

Advanced silica/lignosulfonate composites were obtained using magnesium lignosulfonate and silica precipitated in a polar medium. For comparative purposes analogous synthesis was performed using commercial silica Aerosil®200. Lignosulfonates are waste products of paper industry and their application in new multifunctional materials is of great economic interest. The composites obtained were subjected to thorough characterization by determination of their physicochemical, dispersive-morphological and electrokinetic properties. Their particle size distribution was measured, SEM images were taken, FT-IR analysis and colorimetric study were made, thermal and electrokinetic stabilities and parameters of porous structure were also determined. The results can be of interest in further application studies

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. Jesionowski T. & Krysztafkiewicz A. (2001). Influence of silane coupling agents on surface properties of precipitated silicas Appl. Surf. Sci. 172 18-32. DOI: 10.1016/S0169- -4332(00)00828-X.

  • 2. Jesionowski T. (2002). Effect of surfactants on the size and morphology of the silica particles prepared by an emulsion technique J. Mater. Sci. 37 5275-5281. DOI: 10.1023/A:1021064705690.

  • 3. Jesionowski T. (2009). Preparation of spherical silica in emulsion system using the co-precipitation technique Mater. Chem. Phys. 113 839-849. DOI: 10.1016/j.matchemphys. 2008.08.067.

  • 4. Stöber W. Fink A. & Bohn E. (1968). Controlled growth of monodisperse silica spheres in the micron size range J. ColloidInterface Sci. 26 62-69. DOI: 10.1016/0021-9797(68)90272-5.

  • 5. Ibrahim I.A.M. Zikry A.A.F. & Sharaf M.A. (2010). Preparation of spherical silica nanoparticles: Stöber silica J. Am. Sci. 6 985-989. DOI: 10.1023/A:1026056716397.

  • 6. Ouyang X. Qiu X. & Chen P. (2006). Physicochemical characterization of calcium lignosulfonate - a potentially useful water reducer Colloids Surf. A: Physicochem. Eng. Aspects 282-283 489-497. DOI: 10.1016/j.colsurfa.2005.12.020.

  • 7. Telysheva G. Dizhbite T. Paegle E. Shapatin A. & Demidov I. (2001). Surface-active properties of hydrophobized derivatives of lignosulfonates: effect of structure of organosilicon modifier J. Appl. Polym. Sci. 82 1013-1020. DOI: 10.1002/app.1935.

  • 8. Alonso M.V. Oliet M. Rodriguez F. Astarloa G. & Echeverria J.M. (2004). Use of a methylolated softwood ammonium lignosulfonate as partial substitute of phenol in resol resins manufacture J. Appl. Polym. Sci. 94 643-650. DOI: 10.1002/app.20887.

  • 9. Chiwetelu C.I. Hornof V. Neale G.H. & George A.E. (1994). Use of mixed surfactants to improve the transient interfacial tension behavior of heavy oil/alkaline systems Can. J. Chem. Eng. 72 534-540. DOI: 10.1002/cjce.5450720320.

  • 10. Ansari A. Pawlik M. (2007). Floatability of chalcopyrite and molybdenite in the presence of lignosulfonates. Part I. Adsorption studies Miner. Eng. 20 600-608. DOI: 10.1016/j. mineng.2006.12.007.

  • 11. Gargulak J.D. & Lebo S.E. (2000). Commercial use of lignin-based materials ACS Symp. Ser. 742 304-320. DOI: 10.1021/bk-2000-0742.ch015.

  • 12. Klapiszewski Ł. Mądrawska M. & Jesionowski T. (2012). Preparation and characterisation of hydrated silica/ lignin biocomposites Physicochem. Probl. Miner. Process. 48 463-473. DOI: 10.5277/ppmp120212.

  • 13. Klapiszewski Ł. Nowacka M. Szwarc-Rzepka K. & Jesionowski T. (2013). Advanced biocomposites based on silica and lignin precursors Physicochem. Probl. Miner. Process. 49 497-509. DOI: 10.5277/ppmp130211.

  • 14. Klapiszewski Ł. Nowacka M. Milczarek G. & Jesionowski T. (2013). Physicochemical and electrokinetic properties of silica/lignin biocomposites Carbohydrate Polym. 94 345-355. DOI: 10.1016/j.carbpol.2013.01.058.

  • 15. Prasetyo E.N. Kudanga T. & Fischer R. (2012). Enzymatic synthesis of lignin-siloxane hybrid functional polymers Biotechnol. J. 7 284-292. DOI: 10.1002/biot.201100106.

  • 16. Qu Y. Tian Y. & Zou B. (2010). A novel mesoporous lignin/silica hybrid from rice husk produced by a sol-gel method Bioresource Technol. 101 8402-8405. DOI: 10.1016/j.biortech.2010.05.067.

  • 17. Mishra S.B. Mishra A.K. & Krause R.W. (2009). Growth of silicon carbide nanorods from the hybrid of lignin and polysiloxane using sol-gel process and polymer blend technique Mater. Lett. 63 2449-2451. DOI: 10.1016/j.matlet.2009.08.029.

  • 18. Gregorová A. Košikovă B. & Moravčik R. (2006). Stabilization effect of lignin in natural rubber-based composites Polym. Degrad. Stabil. 91 229-233. DOI: 10.1002/app.24530.

  • 19. Kadla J.F. & Kubo S. (2004). Lignin-based polymer blends: analysis of intermolecular interactions in lignin-synthetic polymer blends Compos Part A: Appl. S. 35 395-400. DOI: 10.1016/j.compositesa.2003.09.019.

  • 20. Jesionowski T. & Krysztafkiewicz A. (2000). Comparison of the techniques used to amorphous hydrated silicas J. Non--Cryst. Solids 277 45-57. DOI: 10.1016/S0022-3093(00)00299-4.

  • 21. Yan M. Yang D. Deng Y. Chen P. Zhou H. & Qiu X. (2010). Influence of pH on the behavior lignosulfonate macromolecules in aqueous solution Colloids Surf. A 371 50-58. DOI: 10.1016/j.colsurfa.2010.08.062.

  • 22. Myrvold B.O. (2008). A new model for the structure of lignosulphonates part 1. Behavior in dilute solutions Ind. Crops. Prod. 27 214-219. DOI: 10.1016/j.indcrop.2007.07.010.

  • 23. Jesionowski T. Żurawska J. Krysztafkiewicz A. Pokora M. Waszak D. & Tylus W. (2003). Physicochemical and morphological properties of hydrated silica precipitated following alkoxysilane surface modification Appl. Surf. Sci. 205 212-224. DOI: 10.1016/S0169-4332(02)01090-5.

  • 24. Jesionowski T. Pokora M. Sobaszkiewicz K. & Pernak J. (2004). Preparation and characterization of functionalized precipitated silica SYLOID®244 using ionic liquids as modifiers Surf. Interface Anal. 36 1491-1496. DOI: 10.1002/sia.1927.

  • 25. Szwarc-Rzepka K. Marciniec B. Jesionowski T. (2013). Immobilization of multifunctional silsesquioxane cage on precipitated silica supports Adsorption 19 483-494. DOI: 10.1007/ s10450-013-9470-2.

  • 26. Ye D. Jiang X. Xia C. Liu L. & Zhang H. (2012). Graft polymers of eucalyptus lignosulfonate calcium with acrylic acid: Synthesis and characterization Carbohydr. Polym. 89 876-882. DOI: 10.1016/j.carbpol.2012.04.024.

  • 27. Lü Q. He Z. Zhang J. & Lin Q. (2011). Preparation and properties of nitrogen-containing hollow carbon nanospheres by pyrolysis of polyaniline-lignosulfonate composites J. Anal. Appl. Pyrol. 92 152-157. DOI: 10.1016/j.jaap.2011.05.009.

Search
Journal information
Impact Factor


IMPACT FACTOR 2018: 0,975
5-year IMPACT FACTOR: 0,878

CiteScore 2018: 1

SCImago Journal Rank (SJR) 2018: 0.269
Source Normalized Impact per Paper (SNIP) 2018: 0.46

Cited By
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 380 252 4
PDF Downloads 127 90 2