Fusion Research of Electrical Tomography with Other Sensors for Two-phase Flow Measurement

Open access

Fusion Research of Electrical Tomography with Other Sensors for Two-phase Flow Measurement

The two-phase flow widely exists in the nature and industrial processes. The measurement of two-phase flows, including gas/solids, gas/liquid and liquid/liquid flows, is still challenging. Fusions of electrical tomography with conventional sensors provide possibilities to improve two-phase flow accurate measurement. In this paper, fusions of (1) electrical resistance tomography (ERT) with electromagnetic (EM) flowmeter, (2) electrical capacitance tomography (ECT) with ERT and (3) ECT with electrostatic sensor are introduced. Some research results of fusion methods are presented and discussed. This paper can provide the theoretical support for the multi-sensor fusion for two-phase flow measurement.

Li, H. Q. (1991). Two-Phase Flow Parameter Measurement and Applications. Hangzhou, China: Zhejiang University Press.

Xu, L. A., Deng, X., Dong, F. (2000). The application of electrical process tomography technique in production. In Proceedings of the 6th National Multiphase Flows Measurement Technology Conference / Journal of Northeastern University, 21 (S1), 1-5.

Deng, X. (2001). Study of an Intelligent Measurement System of Two-Phase Flows Based on Electrical Resistance Tomography. Unpublished Doctoral Dissertation, Tianjin University, Tianjin, China.

Deng, X. (2003). Study on Electrical Tomography for Two-Phase/Multiphase Flow Parameters Measurement. Postdoctoral Report, Tsinghua University, Beijing, China.

Zheng, Z. C. (1996). Marine high-tech and detection technology of multiphase flow. In Proceedings of the 5th National Conference on Multiphase Flow Measurement.

Kim, S. D., Lee, H. J., Oh, B. D. (2010). Investigation on application of Parshall flume for flow measurement of low-flow season in Korea. Measurement Science Review, 10 (4), 111-115.

Yang, W. Q., Liu, S. (2000). Role of tomography in gas/solids flow measurement. Flow Measurement & Instrumentation, 11 (3), 237-244.

Liu, S., Chen, Q., Wang, H. G., Jiang, F., Ismail, I., Yang, W. Q. (2005). Electrical capacitance tomography for gas-solids flow measurement for circulating fluidized beds. Flow Measurement and Instrumentation, 16 (2-3), 135-144.

Lay-Ekuakille, A., Vergallo, P., Trotta, A. (2010). Impedance method for leak detection in zigzag pipelines. Measurement Science Review, 10 (6), 209-213.

Lay-Ekuakille, A., Vendramin, G., Trotta, A. (2009). Robust spectral leak detection of complex pipelines using filter diagonalization method. IEEE Sensor Journal, 9 (11), 1605-1614.

Deng, X., Li, G. Y., Wei, Z., Yan, Z. W., Yang, W. Q. (2011). Theoretical study of vertical slug flow measurement by data fusion from electromagnetic flowmeter and electrical resistance tomography. Flow Measurement and Instrumentation, 22 (4), 272-278.

Deng, X., Peng, L. H., Yao, D. Y., Zhang, B. F. (2004). Velocity distribution measurement using pixel-pixel cross-correlation of electrical tomography. Chinese Journal of Electronics, 13 (3), 548-551.

He, Y. B. (2006). Research on Techniques of Dual-Mode Electrical Resistance & Capacitance Tomography. Unpublished Doctoral Dissertation, Tianjin University, Tianjin, China.

Deng, X., Chen, Y., Yan, Z., Wei, Z. (2009). AC impedance model of array electrodes in multisensor fusion system for two-phase flow measurement. IEEE Transactions on Instrumentation and Measurement, 59 (6), 1722-1726.

Huang, B. S., Kong, Z. Y., Jing, Y. F. (1981). Electromagnetic Flowmeter. China: Atomic Energy Press.

Wei, Z. (2009). Study of Two-Phase Flow Measurement Based on Multi-Sensor Fusion. Unpublished Master Dissertation, Beijing Jiaotong University, Beijing, China.

Yang, W. Q. (2010). Design of electrical capacitance tomography sensors. Measurement Science and Technology, 21 (4), 1-13.

Deng, X., Tang, Y. (2006). Study of multi-sensor fusion on electrical process tomography. Journal of Electronic Measurement and Instrument, 20 (2), 63-66.

Measurement Science Review

The Journal of Institute of Measurement Science of Slovak Academy of Sciences

Journal Information


IMPACT FACTOR 2017: 1.345
5-year IMPACT FACTOR: 1.253



CiteScore 2017: 1.61

SCImago Journal Rank (SJR) 2017: 0.441
Source Normalized Impact per Paper (SNIP) 2017: 0.936

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 80 80 4
PDF Downloads 32 32 1