The Structure Analytical Research of Porous Permeable Wire Material

Open access

Abstract

The details of making technology of porous permeable material with use of wire are allowed to carry out the analytical research of structure and structural characteristics of wire winding body. Its permit for prognostication the final properties of material, that is produced by the following deformation treatment (diameter reduction). Due to the regular organized arrangement of wire, the coil of winding body is considered as a multispan continuous beam, but a contact of coils - as interaction of two cylinders. Possibility of exactly calculation of the contacts between coils is allowed to go over the single fragment displacements into deformation of whole winding body. During research of deformation processes in regards of winding body geometry and used wire mechanical properties, the structural characteristics of porous permeable wire material are expected. The optimal number of winding layers, eliminating the distortion of organized final structure, is established. The material pressure-compactness relation is obtained in order to control the technological conditions of winding and drafting for guarantee the product required properties.

[1] S.V. Belov. Poristyye pronitsayemyye materialy. M.: Metallurgiya, 1987, s. 335.

[2] Yu.I. Sinel'nikov et al. Poristyye setchatyye materialy. M.: Metallurgiya, 1983, s. 64.

[3] A.Ye. Yakubovskiy, Ye. Petyushik. „Tekhnologiya polucheniya poristykh provolochnykh izdeliy”, Materialy 22-go Mezhdunarodnogo Nauchnogo, Simpoziuma Molodykh Nauchnykh Rabotnikov i Studentov, Zelena Gura, Polsha, 2001, s. 247.

[4] Ye.Ye. Petyushik, A.Ch. Yakubovskiy, Ch.A. Yakubovskiy. „Napryazhenno-deformirovannoye sostoyaniye v yedinichnom kontakte pri uprugom deformirovanii pronitsayemykh materialov na osnove provoloki v vide tel namotki”, Vestsi Akad. navuk Belarusi. Ser. fiz.-tekhn. navuk.¾ 2002.¾ № 2.¾, s. 10-15.

[5] A.Ch. Yakubovskiy, Ch.A. Yakubovskiy. „O metode rascheta nerazreznykh balok”, Vestnik BNTU, № 2, 2006, s. 43-48.

[6] V.I. Feodos'yev. Soprotivleniye materialov, M.: Nauka, 1967, s. 552.

[7] Ye.Ye. Petyushik, A.Ch. Yakubovskiy, Ch.A. Yakubovskiy. „Raschet usiliy i peremeshcheniy pri uprugo-plasticheskom izgibe i udlinenii provoloki v sloye pronitsayemogo materiala pri radial'nom pressovanii tela namotki”, Vestsi Akademii navuk Belarusi. Seryya fiz.-tekhnichnykh navuk, ¾ 2003.¾, № 1.¾, s. 49-53.

[8] Ye.Ye. Petyushik, A.Ch. Yakubovskiy, Ch.A. Yakubovskiy. „Plasticheskoye deformirovaniye provolochnogo tela namotki”, Vestnik BGPA.¾, 2002.¾, № 1.¾, s. 31-34.

Journal Information

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 67 67 5
PDF Downloads 32 32 2