Dielectric properties of vanadium doped barium titanate synthesized via high-energy ball milling

Open access

Abstract

The study shows the advisability of using a mechanochemical synthesis method, based on a high-energy planetary ball milling, to a modification of barium titanate by a vanadium doping. This method improves useful properties of BaTi0:95V0:05O3 as a capacitor material. It has a high value of electric permittivity ɛ′ in the wide range of temperature and low dielectric losses ɛ″ as well as a low electrical conductivity.

[1] Barranco A.P. (Ed.), Advances in ferroelectrics, InTech, Rijeka, 2013.

[2] Heartling G.H., J. Am. Ceram. Soc., 82 (1999), 797. http://dx.doi.org/10.1111/j.1151-2916.1999.tb01840.x

[3] Arlt G., Hennings D., De With G., J. Appl. Phys., 58 (1985), 1619. http://dx.doi.org/10.1063/1.336051

[4] Tang H., Lin Y., Sodano H.A., Adv. Energy Mater., 3 (2013), 451. http://dx.doi.org/10.1002/aenm.201200808

[5] Choi Y.K., Koshina T., Takeda H., Teranishi T., Tsurumi T., Appl. Phys. Lett., 97 (2010), 212907. http://dx.doi.org/10.1063/1.3508947

[6] Lee J.K., Hong K.S., Jang J.W., J. Am. Ceram. Soc., 84 (2001), 2001. http://dx.doi.org/10.1111/j.1151-2916.2001.tb00949.x

[7] Lin T.F., Hu C.T., J. Am. Ceram. Soc., 73 (1990), 531. http://dx.doi.org/10.1111/j.1151-2916.1990.tb06549.x

[8] Pinceloup P., Courtois C., Leriche A., Thierry B., J. Am. Ceram. Soc., 82 (1999), 3049. http://dx.doi.org/10.1111/j.1151-2916.1999.tb02201.x

[9] Liu R., Xuan Y., Jia Y.Q., Mater. Chem. Phys., 57 (1998), 81. http://dx.doi.org/10.1016/S0254-0584(98)00197-7

[10] Borstel G., Eglitis R.I., Kotomin E.A., Heifets E., J. Cryst. Growth, 237 (2002), 687. http://dx.doi.org/10.1016/S0022-0248(01)01994-7

[11] Hirose N., Skakle J.M.S., West A.R., J. Electroceram., 3 (1999), 233. http://dx.doi.org/10.1023/A:1009973300039

[12] Kajtoch C., Bąk W., Garbarz-glos B., Condens. Matter Phys., 16 (2013), 31702. http://dx.doi.org/10.5488/CMP.16.31702

[13] Garbarz-glos B., Piekarczyk W., Smeltere I., Smiga W., Antonova M., Ferroelectrics, 436 (2012), 87. http://dx.doi.org/10.1080/10584587.2012.731349

[14] Anwar S., Sagdeo P.R., Lalla N.P., Mater. Res. Bull., 43 (2008), 1761. http://dx.doi.org/10.1016/j.materresbull.2007.07.013

[15] Yang H., Zhou C., Liu X., Zhou Q., Chen G., Li W., Wang H., J. Eur. Ceram. Soc., 33 (2013), 1177. http://dx.doi.org/10.1016/j.jeurceramsoc.2012.11.019

[16] Buscaglia M.T., Buscaglia V., Viviani M., Nanni P., Hanuskova M., J. Eur. Ceram. Soc., 20 (2000), 1997. http://dx.doi.org/10.1016/S0955-2219(00)00076-5

[17] Jung Y.S., Na E.S., Paik U., Lee J., Kim J., Mater. Res. Bull., 37 (2002), 1633. http://dx.doi.org/10.1016/S0025-5408(02)00813-9

[18] Garbarz-glos B., Bąk W., Molak A., Kalvane A., Phase Transit., (2012).

[19] Bąk W., Kajtoch C., Starzyk F., Mater. Sci. Eng. B-Adv., 100 (2003), 9. http://dx.doi.org/10.1016/S0921-5107(02)00578-0

[20] Moura F., Simões A.Z., Cavalcante L.S., Zaghete M.A., Varela J.A., Longo E., J. Alloy. Compd., 466 (2008), 115. http://dx.doi.org/10.1016/j.jallcom.2007.11.057

[21] Liu S.J., Zenou V.Y., Sus I., Kotani T., Schilfgaarde M.V., Newman N., Acta Mater., 55 (2007), 2647. http://dx.doi.org/10.1016/j.actamat.2006.12.006

[22] Bandyopadhyay S., Liu S.J., Tang Z.Z., Singh R.K., Newman N., Acta Mater., 57 (2009), 4935. http://dx.doi.org/10.1016/j.actamat.2009.06.063

[23] Wu Y., Nguyen C., Seraji S., Forbess M.J., Limmer S.J., Chou T., Cao G.Z., J. Am. Ceram. Soc., 84 (2001), 2882. http://dx.doi.org/10.1111/j.1151-2916.2001.tb01109.x

[24] Noguchi Y., Miyayama M., Appl. Phys. Lett., 78 (2001), 1903. http://dx.doi.org/10.1063/1.1357215

[25] Zeng J.T., Li Y.X., Yang Q.B., Yin Q.R., Mater. Sci. Eng. B-Adv., 117 (2005), 241. http://dx.doi.org/10.1016/j.mseb.2004.11.015

[26] Cai W., Fu C., Lin Z., Deng X., Ceram. Int., 37 (2011), 3643. http://dx.doi.org/10.1016/j.ceramint.2011.06.024

[27] Choi Y.K., Hoshina T., Takeda H., Teranishi T., Tsurumi T., Appl. Phys. Lett., 97 (2010), 212907. http://dx.doi.org/10.1063/1.3508947

[28] Wu L., Chure M.CH. Wu K.K., Chang W.CH., Yuang M.J., Liu W.K., Wu M.J., Ceram. Int., 35 (2009), 957. http://dx.doi.org/10.1016/j.ceramint.2008.04.030

[29] Brennan C., Ferroelectrics, 150 (1993), 199. http://dx.doi.org/10.1080/00150199308008705

[30] Shih W.Y., Shih W.H., Aksay I.A., Phys. Rev. B., 50 (1994), 15575. http://dx.doi.org/10.1103/PhysRevB.50.15575

[31] Hsi C.S., Chen Y.C., Jantunen H., Wu M.J., Lin T.C., J. Eur. Ceram. Soc., 28 (2008), 2581. http://dx.doi.org/10.1016/j.jeurceramsoc.2008.03.014

[32] Wang W., Cao L., Liu W., Su G., Zhang W., Ceram. Int., 39 (2013) 7127. http://dx.doi.org/10.1016/j.ceramint.2013.02.055

[33] Yu M., Hu J., Liu J., Li S., J. Magn. Magn. Mater., 326 (2013), 31. http://dx.doi.org/10.1016/j.jmmm.2012.08.033

[34] Ko Y.N., Choi S.H., Kang Y.C., J. Eur. Ceram. Soc., 33 (2013), 1335. http://dx.doi.org/10.1016/j.jeurceramsoc.2012.11.028

[35] Xin C.R., Zhang J., Liu Y., Zhang Q.L., Yang H., Cheng D., Mater. Res. Bull., 48 (2013), 2220. http://dx.doi.org/10.1016/j.materresbull.2013.02.044

[36] Wieczorek-ciurowa K., Dulian P., Bąk W., Kajtoch C., Przem. Chem., 90 (2011), 1400. (in Polish).

[37] Wieczorek-ciurowa K., Dulian P., Nosal A., Domagała J., J. Therm. Anal. Calorim., 101 (2010), 471. http://dx.doi.org/10.1007/s10973-010-0802-0

[38] Dulian P., Bąk W., Wieczorek-ciurowa K., Kajtoch C., Mater. Sci.-Poland, 31(2) (2013), 462. http://dx.doi.org/10.2478/s13536-013-0126-4

Journal Information


IMPACT FACTOR 2017: 0.854
5-year IMPACT FACTOR: 0.794



CiteScore 2017: 0.90

SCImago Journal Rank (SJR) 2017: 0.275
Source Normalized Impact per Paper (SNIP) 2017: 0.471

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 279 279 60
PDF Downloads 150 150 31