Investigation of the Stress-Strain State of Seamless Pipe in the Initial State

Open access

Abstract

Mechanical properties of the pipeline samples that had been cut in annular and axial directions were investigated. The methodology of modeling and calculation of the real stress-strain state was described. The stable state during in the deformation process was defined. The results of the experimental researches were used as a test variant during examination of pipe strength.

[1] Borodavkin P.P., Edited by Sinykov A.M.: Strength of pipelines. Moskow, Nedra, 1984.

[2] Androno I.N., Kuzbogev A.S., Aginey R.V.: Resource of ground pipelines - I: Factors that constraining resource. Standard Test Methods, Ukhta, 2008, pp. 75-96.

[3] Malinin N.N.: Applied theory of plasticity and creep. Second Edition. Moskow, Mechanical engineering, 1975.

[4] GOST 8731-74 - Steel seamless hot rolled pipes. Technical requirements.

[5] GOST 3845-75 - Metal pipes. Method of hydraulic pressure test.

[6] Safety regulations 03-576-03 - The rules for design and safe operation of vessels that are working under pressure.

[7] Frost H.J., Ashby M.F.: Deformation-mechanism maps. Chelyabinsk, Metallurgy, 1989.

[8] Mildin A.M., Zelentsov D.G., Olevskiy V.I., Pletin V.V.: Developing the concept of prediction the mechanical properties of thin-walled shells. Eastern-European Journal of Enterprise Technologies, 2011, Vol. 1, No. 3, pp. 57-61.

Archive of Mechanical Engineering

The Journal of Committee on Machine Building of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.44

SCImago Journal Rank (SJR) 2016: 0.162
Source Normalized Impact per Paper (SNIP) 2016: 0.459

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 65 65 2
PDF Downloads 37 37 1