Stress Analysis of the Framework of a Device Designed for Scales Calibrating

Open access


This article is focused on the stress analyses of the welded structure of the device designed to the scales calibrating with maximum loading capacity up to ten tons. The article includes basic knowledges of the theory of elasticity and stress analysis and numerical method called Finite Element Method that were used for the task solution. Cores of the work were stress analyses of selected parts of the designed structure of the device. For stress analyses the ADINA numerical software was used. Results of analyses of the primary design device showed that strength in same locations did not respond to the required maximal load. The structure in critical locations was modified and subsequently reanalyses confirmed the sufficient strength with prescribed safety factor.

[1] Bajla, J., Broncek, J., Antala, J & Sekereova, D. (2014). Mechanical Engineering Tables (In Slovak). Selection standard. Slovak Office Standards, Metrology and Testing. ISBN 978-80-8130-039-4.

[2] Harusinec, J., Suchanek, A, Gerlici, J. & Lack, T. (2012). Locomotive brake unit modification for laboratory experimental tests. In Dynamics of rigid and deformable bodies 2012 (electronic source): Proceedings of international scientific conference, Usti nad Labem, Czech Republic, 10 - 12 October 2012 (9 pages). Ústí nad Labem, Czech Republic.

[3] Svoboda, M. Soukup, J. (2013). Verification of numeric solution by experiment for examination vertical oscillation of a mechanical system. Manufacturing Technology, 13(4), 559-563.

[4] Hauser, V., Stastniak, P., Gerlici, J. & Lack, T. (2014). Design solution of stanchions mechanism for goods mounting during transport on the Shimmns wagon. In: Innovations in conception, design, production and testing the freight wagons I.: Proceedings of conference, Žilina, Slovak Republic, 27 - 28 November 2014 (pp. 47-53). Žilina, Slovak Republic.

[5] Suchanek, A., J. Harusinec, J., Gerlici, J. & Lack, T. (2013). Analysis of models for simulation computations and experimental detection of stress in braked railway wheel In: TRANSCOM 2013: 10th European conference of young researchers and scientists: Žilina, June 24-26, 2013, (pp. 283 - 287). Slovak Republic. Žilina, University of Žilina.

[6] Klimenda, F., Skocilasova, B. (2015). Rollers vibration of pipe conveyor. Manufacturing Technology, 15(6), 991-995.

[7] Bathe, K. J. (1996). Finite Element Method. Prenice-Hall, Inc. New Jersey.

[8] Lack, T., Gerlici, J. & Manurova, M. (2016). Freight car bogie properties analysis by means of simulation computations. Manufacturing Technology, 16(4), 667-672.

[9] Štastniak, P., Gerlici, J., Lack, T. & Harusinec, J. (2013). Computer aided simulation analysis for computation of modal analysis of the freight wagon. In: TRANSCOM 2013: 10th European conference of young researchers and scientists: Žilina, June 24-26, 2013, (pp. 297-300). Slovak Republic. Žilina, University of Žilina.

[10] Gerlici, J., Lack, T. (2014). Rail vehicles brake components test bench utilisation. Applied Mechanics and Materials, 486, 379-386.

[11] Gerlici, J., Lack, T. & Harusinec, J. (2014). Development of test stand prototype for rail vehicles brake components testing. Komunikacie, 16(3A), 27-32.

[12] Melnik, R., Sowinski, B. (2014). The analysis of rail vehicle model eigenvalues for suspension fault detection method. In: 14th Mini Conference on Vehicle system Dynamics, Identification and Anomalies, VSDIA 2014, Budapest University of Technology and Economics, Hungary, 10 - 12 November, 2014, (pp. 39-46). Hungary, Budapest.

[13] Steisunas, S., Bureika, G. (2014). Study of freight wagon running dynamic stability taking into account the track stiffness variation. Transport Problems, 9(4), 131-143.

Journal Information


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 129 129 13
PDF Downloads 46 46 6