Influencing the anticorrosion efficiency of pigments based on zinc ferrite by conductive polymers

Open access

Abstract

Generally, organic coatings which contain zinc ferrites are able to protect metal substrate, most often low-carbon steel, by inhibition mechanism. Conductive polymers are using a system of conjugated double-bonds to transfer a charge over the chain thereby providing their own electrical conductivity in the organic coatings. The charge from the chain in combination with the iron substrate generates electrons to the formation of passivation products on the surface of paint film. This paper is focused on combination of zinc ferrite with conductive polymer and using of synergic effect of these two components. The organic coatings were formulated from hematite and specularite on pigments concentration line 5, 10, 20 and 25 wt.% for better recognizing of the effectiveness of zinc ferrite component. The content of the conductive polymer was consistently set at 3 wt.% in each organic coating. A solvent-based epoxy-ester resin was used as a binder. The physico-mechanical and corrosion tests were performed for all samples. The corrosion signs were evaluated on the surface of coating and also on the surface of metal substrate. In the end, the efficiency was compared alone zinc ferrite and alone polymers and also their combinations.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. Schauer T. et al. Protection of iron against corrosion with polyaniline primers Progress in Organic Coatings 1998 33 20-27.

  • 2. Armelin E. et al. Corrosion protection with polyaniline and polypyrrole as anticorrosive additives for epoxy paint Corrossion Science 2008 50 721-728.

  • 3. Yang X. et al. Anticorrosion performance of polyaniline nanostructures on mild steel Progress in Organic Coatings 2010 69 267-271.

  • 4. Ebrahimi G. et al. Investigation on corrosion protection mechanism of polyaniline nanoparticles doped with phosphoric acid by scanning Kelvin probe and other electrochemical methods Journal of Taiwan Institute. Chemical Engeniering 2017 70 427-436.

  • 5. Kalendová A. Kalenda P. Antikorozní nátěrové hmoty ve vícevrstvých systémech Corrosion and Protection of Materials 1994 38 (5) 81-89.

  • 6. Kalendová A. Antoš P. Anticorrosive coatings in multilayer systems Corrosion and Protection of Materials 1998 42 55-57.

  • 7. Kalendová A. Alkalising and neutralising effects of anticorrosive pigments containing Zn Mg Ca and Sr cations Progress in Organic Coatings 2000 38 199–206.

  • 8. Kurian M. Nair D. S. Effect of preparation conditions on Nickel Zinc Ferrite nanoparticles: A comparison between sol-gel auto combustion and co-precipitation methods Journal of Saudi Chemical Society 2016 20 S517–S522.

  • 9. Armelin E. Anticorrosion performances of epoxy coatings modified with polyaniline: A comparison between the emeraldine base and salt forms Progress in Organic Coatings 2009 65 88–93.

  • 10. Alam J. High performance corrosion resistant polyaniline/alkyd ecofriendly coatings Current Applied Physics 2009 9 80–86.

Search
Journal information
Impact Factor
CiteScore 2018: 0.25

SCImago Journal Rank (SJR) 2018: 0.164
Source Normalized Impact per Paper (SNIP) 2018: 0.286

Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 349 272 5
PDF Downloads 197 153 2