Roughness Measurement of Dental Materials

Open access

Abstract

This paper presents a roughness measurement of zirconia ceramics, widely used for dental applications. Surface roughness variations caused by the most commonly used dental instruments for intraoral grinding and polishing are estimated. The applied technique is simple and utilizes the speckle properties of the scattered laser light. It could be easily implemented even in dental clinic environment. The main criteria for roughness estimation is the average speckle size, which varies with the roughness of zirconia. The algorithm used for the speckle size estimation is based on the normalized autocorrelation approach.

[1] Oh, Won-Suck, R. Delong, K. Anusavice. Factors Affecting Enamel and Ceramic Wear: A Literature Review. The J. of Prosthetic Dentistry, 87 (2002), No. 4, 451-459.

[2] Rashid, H. The Effect of Surface Roughness on Ceramics used in Dentistry: A Review of Literature. Europ. J. of Dentistry, 8 (2014), No. 4, 571-579.

[3] Hmaidouch, R., W.-D. M¨uller, H.-Ch. Lauer, P. Weigl. Surface Roughness of Zirconia for Full-contour Crowns after Clinically Simulated Grinding and Polishing. International Journal of Oral Science, 6 (2014), No. 4, 241-246.

[4] Whitehouse, D. J. Surface Metrology - Review Article. Measurement Science and Technology, 8 (1997), 955-972.

[5] Windecker, R., S. Franz, H. Tiziani. Optical Roughness Measurements with Fringe Projection. Appl. Optics, 38 (1999), No. 13, 2837-2842.

[6] Ezazshahabi, N., M. Tehran, M. Latifi, K. Madanipour. Surface Roughness Assessment of Woven Fabrics using Fringe Projection Moiré Techniques. Fibres & textiles in Eastern Europe, 23 (2015), No. 3, 76-84.

[7] Kumar, S., G. Kumar. Surface Roughness Characterization using Interference Fringe Analysis. IGIRSET, 2 (2013), No. 1, 563-573.

[8] De Azevedo, A., H. Panzeri, et al. Assessment in Vitro of Brushing on Dental Surface Roughness Alteration by Laser Interferometry. Braz Oral Res., 22 (2008), No. 1, 11-17.

[9] Gülker, G., K. Hinsh. Detection of Surf Microstructure Changes by ESPI. Optics and Lasers in Engineering, 26 (1997), No. 2, 165-178.

[10] Nicklawy, M., A. Hassan, M. Bahrawi, N. Farid, A. Sanjid. Characterizing Surface Roughness by Speckle Pattern Analysis. J. of Scientific & Industrial Research, 68 (2009), No. 2, 118-121.

[11] Wang, Sh., Y. Tian, Ch. Tay, Ch. Quan. Development of a Laser-scattering- based Probe for On-line Measurement of Surface Roughness. Applied Optics, 42 (2003), No. 3, 1318-1324.

[12] Wax, A., V. Beckman. Biomedical Applications of Light Scattering, The McGraw-Hill Companies, Inc., 2010.

[13] Manallah, A., M. Bouafia. Application of the Technique of Total Integrated Scattering of Light for Micro-roughness Evaluation of Polished Surfaces. Physics Procedia, 21 (2011), 174-179.

[14] Martinez-Fuentes, V., I. Dominguez-Lopez, A. L. Garcia-Garcia. Surface Texture Changes Followed-up in Real Time during the InitialWear Transient of Dry Sliding of Steel against Several Metals using Laser Light Scattering. Wear, 271 (2011), Nos 5-6, 994-998.

[15] Cochran, P. T. Fibre Optic Surface Roughness Measurement, Thesis, New Zealand, University of Waikato, Department of Physics, 2004.

[16] Pernick, B. J. Surface Roughness Measurements with an Optical Fourier Spectrum Analyzer. Applied Optics, 18 (1979), No. 6, 796-801.

[17] Stepień , K. Research on a Surface Texture Analysis by Digital Signal Processing Methods. Tehnichki vjesnik, 21 (2014), No. 3, 485-493.

[18] Stacy, R. Contact Angle Measurement Technique for Rough Surfaces, Thesis, Michigan Technological University, 2009.

[19] Svitasheva, S. Experimental Study of Polarization Properties of Rough Surface. Electrical and Electronic Engineering, 2 (2012), No. 6, 403-408.

[20] Feidenhans, N., P.-E. Hansen, et al. Comparison of Optical Methods for Surface Roughness Characterization. Meas. Sci. Technol., 26 (2015), 085208.

[21] Pino, A., J. Pladellorens. Measure of Roughness of Paper using Speckle. Proc. of SPIE, 7432 (2009), 74320E - 1-9.

[22] Goodman, J. W. Statistical Properties of Laser Speckle Patterns. Ch. 2 in Laser Speckle and Related Phenomena, pp. 9-75, series Topics in Applied Physics, 9 (ed. J. C. Dainty), Berlin - Heidelberg - New-York, Springer-Verlag, 1975.

[23] Piederrière, Y., J. Cariou, Y. Guern, B. Le Jeune, G. Le Brun, J. Lotrian. Scattering through Fluids: Speckle Size Measurement and Monte Carlo Simulations Close to and into the Multiple Scattering. Optics Express, 12 (2004), No. 1, 176-188.

Journal of Theoretical and Applied Mechanics

The Journal of Institute of Mechanics of Bulgarian Academy of Sciences

Journal Information

CiteScore 2017: 1.14

SCImago Journal Rank (SJR) 2017: 0.217
Source Normalized Impact per Paper (SNIP) 2017: 0.583

Mathematical Citation Quotient (MCQ) 2017: 0.01

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 437 437 49
PDF Downloads 195 195 16