For the safe and economical design and operation of freight pipelines it is necessary to know slurry flow behaviour in inclined pipe sections, which often form significant part of pipelines transporting solids. Fine-grained settling slurry was investigated on an experimental pipe loop of inner diameter D = 100 mm with the horizontal and inclined pipe sections for pipe slopes ranging from −45° to +45°. The slurry consisted of water and glass beads with a narrow particle size distribution and mean diameter d50 = 180 µm. The effect of pipe inclination, mean transport volumetric concentration, and slurry velocity on flow behaviour, pressure drops, deposition limit velocity, and concentration distribution was studied. The study revealed a stratified flow pattern of the studied slurry in inclined pipe sections. Frictional pressure drops in the ascending pipe were higher than that in the descending pipe, the difference decreased with increasing velocity and inclination. For inclination less than about 25° the effect of pipe inclinations on deposition limit velocity and local concentration distribution was not significant. For descending pipe section with inclinations over −25° no bed deposit was observed.
Clift, R., Clift, D.H.M., 1981. Continuous measurement of the density of flowing slurries. International Journal of Multiphase Flow, 7, 5, 555–561.
Doron, M., Simkhis, M., Barnea, D., 1997. Flow of solid-liquid mixtures in inclined pipes. International Journal of Multiphase Flow, 23, 313–323.
Durand, R., Condolios, E., 1952. Étude expérimentale du refoulement des matériaux en conduite. 2émes Journées de l´Hydralique, SHF, Grenoble.
Gibert, R., 1960. Transport hydraulique et refoulement des mixtures en conduites. Annales Des Ponts et Chaussees, 12, 307–374.
Gopaliya, M.K., Kaushal, D.R., 2016. Modeling of sand-water slurry flow through horizontal pipe using CFD. Journal of Hydrology and Hydromechanics, 64, 3, 261–272.
Hashimoto, H., Noda, L., Masuyama, T., Kawashima, T., 1980. Influence of Pipe Inclination on Deposit Velocity, Proc. HYDROTRANSPORT 7, BHR Group, Sendai, Japan, 4–6 November 1980, 231–244.
De Hoog, E., in‘t Veld, M., Van Wijk, J., Talmon, A., 2017. An experimental study into flow assurance of coarse inclined slurries. In: Proceedings of Transport and Sedimentation of Solids Particles, Prague, Czech Republic.
Krupicka, J., Matousek, V., 2014. Gamma-ray-based measurement of concentration distribution in pipe flow of settling slurry: vertical profiles and tomographic maps. J. Hydrology and Hydromechanics, 62, 2,126–132.
Matousek, V., 1996. Internal structure of slurry flow in inclined pipe. Experiments and mechanistic modelling, Proc. HYDROTRANSPORT 13, BHRG, Cranfield, UK, 1996, 187–210.
Matousek, V., 1997. Flow Mechanism of Sand-Water Mixtures in Pipelines. PhD Thesis. Delft University Press, Delft.
Matousek, V., 2002. Pressure drops and flow patterns in sand–mixture pipes. Experimental Thermal and Fluid Science, 26, 693–702.
Matousek, V., Krupicka, J., Kesely, M., 2018. A layered model for inclined pipe flow of settling slurry. Powder Technology, 333, 317–326.
Spelay, R.B., Gillies, R.G., Hashemi, S.A., Sanders, R.S., 2016. Effect of pipe inclination onthe deposition velocity of settling slurries. The Canadian Journal of Chemical Engineering, 94, 1032–1039.
Shook, C.A., Roco, M.C., 1991. Slurry Flow. Principles and Practice. Butterworth-Heinemann, Stoneham, USA.
Thomas, A.D., Cowper, N.T., 2017. The design of slurry pipelines – historical aspects. In: Proc. HYDROTRANSPORT 20, Melbourne, Australia, pp. 7–22.
Vlasak, P., Chara, Z., 1999. Laminar and turbulent flow experiments with yield-power law slurries. Powder Technology, 104, 200–206.
Vlasak, P., Chara, Z., 2009. Conveying of solid particles in Newtonian and non-Newtonian carriers. Part. Sci. Technol., 27, 5, 428–443.
Vlasak, P., Kysela, B., Chara, Z., 2012. Flow structure of coarse-grained slurry in horizontal pipe. Journal of Hydrology and Hydromechanics, 60, 2, 115–124.
Vlasak, P., Chara, Z., Krupicka, J., Konfrst, J., 2014. Experimental investigation of coarse particles-water mixture flow in horizontal and inclined pipes. Journal of Hydrology and Hydromechanics, 62, 3, 241–247.
Vlasak, P., Chara, Z., Konfrst, J., Krupicka, J., 2016. Distribution of concentration of coarse particle-water mixture in horizontal smooth pipe. Canadian Journal of Chemical Engineering, 94, 1040–1047.
Vlasak, P., Chara, Z., Konfrst, J., 2017. Flow behaviour and local concentration of course particles-water mixture in inclined pipes. Journal of Hydrology and Hydromechanics, 65, 2, 183–191.
VanWijk, J.M., Talmon, A.M., Van Rhee, C., 2016. Stability of vertical hydraulic transport processes for deep ocean mining: an experimental study, Ocean Eng., 125, 203–213.
Wilson, K.C., 1976. A unified physically based analysis of solid-liquid pipeline flow. In: Stephens, H.S., Streat, M., Clark, J., Coles, N.G. (Eds.): Proc. HYDROTRANSPORT 4. B.H.R.A., Cranfield, UK, Pap. A1.
Wilson, K.C., 1979. Deposition-limit nomograms for particles of various densities in pipeline flow. In: Proc. HYDRO-TRANSPORT 6, BHRA, Cranfield, UK, pp. 1–12.
Wilson, K.C., Byberg, S.P., 1987. Stratification-ratio scaling technique for inclined slurry pipelines. In: Proc. 12th International Conference on Slurry Technology, STA, Washing-ton, USA, pp. 59–64.
Wilson, K.C., Tse, J.K.P., 1984. Deposition limit for coarse-particle transport in inclined pipes. In: Proc. HYDRO-TRANSPORT 9, BHRA Fluid Engineering, Cranfield, UK, pp. 149–169.
Wilson, K.C., Addie, G.R., Sellgren, A., Clift, R., 2006. Slurry Transport Using Centrifugal Pumps. Springer, US.
Worster, R.C., Denny, D.F., 1955. Hydraulic transport of solid materials in pipelines. P. I. Mech. Eng., 169, 563–586.