An Analysis of the Structure and Thermal Conductivity of Hollow Microsphere Filled Syntactic Foams

Open access

Abstract

The influence of types and parameters of hollow microspheres in the composition of syntactic foams on their structure and coefficient of thermal conductivity has been studied. By using structural and thermal analysis it has been found that the volume concentration and the size of the ceramic and glass hollow microspheres have a strong impact on the density and thermophysical properties of the thin syntactic foams coatings. It has been shown that the best heat insulating properties belong to syntactic foam with composition of 60 vol. % ceramic microspheres with particle size of 1 - 40 μm (k = 0.029 W/m·K, R = 0.008 (m2·K)/W) and with composition of 80 vol. % glass hollow microspheres with particle size of 9 - 25 μm (k = 0.087 W/m·K, R = 0.008 (m2·K)/W). The results demonstrate that application of syntactic foams as thin insulating coatings is appropriate and they are an energy efficient material with number of benefits compare with the common thermal insulators.

[1] ALLEN, M. - BAUMGARTNER, R. - FESMIRE, J. - AUGUSTYNOWICZ, S.: Advances in microsphere insulation systems. AIP Conference Proceedings Vol. 710, 2004, pp. 619 - 626.

[2] BOZSAKY, D.: Laboratory tests with liquid nano-ceramic thermal insulation coating. Procedia Engineering Vol. 123, 2015, pp. 68 – 75.

[3] RYZHENKOV, A. - POGORELOV, S. - LOGINOVA, N. - BELYAEVA, E. - PLESTSHEVA, A.: Syntactic Foams Efficiency with the Use of Various Microspheres for Heat Supply Equipment and Pipelines Heat Insulation. Modern Applied Science, Vol. 9, № 4, 2015, pp. 319 - 327, doi:10.5539/mas.v9n4p319.

[4] LI, B. - YUAN, J. - AN, Z. - ZHANG, J.: Effect of microstructure and physical parameters of hollow glass microsphere on insulation performance. Materials Letters, Vol. 65, 2011, pp. 1992 - 1994.

[5] PARK, S.-J. - JIN, F.-L. - LEE, C.: Preparation and physical properties of hollow glass microspheres-reinforced epoxy matrix resins. Materials Science and Engineering A, Vol. 402, Iss. 1 - 2, 2005, pp. 335 - 340.

[6] GENG, H. - LIU, J. - GUO, A. - REN, S. - XU, X. - LIU, S.: Fabrication of heat-resistant syntactic foams through binding hollow glass microspheres with phosphate adhesive. Materials Design, Vol. 95, 2016, pp. 32 - 38.

[7] RYZHENKOV, A. - LOGINOVA, N. - BELYAEVA, E. - LAPIN, Y. - PRISCHEPOV, A.: Review of binding agents in syntactic foams for heat-insulating structures in power industry facilities. Modern Applied Science, Vol. 9, 2015, pp. 96 - 105.

[8] GAO, J. - WANG, J. - XU, H. - WU, C.: Preparation and properties of hollow glass bead filled silicone rubber foams with low thermal conductivity. Materials Design, Vol. 46, 2013, pp. 491 - 496.

[9] MEE, S.: The Synthesis, Characterisation and Properties of Self-Assembled Hollow and Low Density Microspheres. PhD Thesis, University of Birmingham, 2011.

[10] HU, N. - DAI, J. - ZHU, Z. - HUANG, X. - WU, P.: Synthesis and characterization of hollow glass– ceramics microspheres. Composites Science and Technology, Vol. 72, 2012, pp. 528 - 532.

[11] YUNG, K. - ZHU, B. - YUE, T. - XIE, C.: Preparation and properties of hollow glass microsphere-filled epoxy-matrix composites. Composites Science and Technology, Vol. 69, 2009, pp. 260-264.

[12] LIANG, J. - LI, F.: Measurement of thermal conductivity of hollow glass-bead-filled polypropylene composites. Polymer Testing, Vol. 25, 2006, pp. 527 - 531.

[13] ISO 22007-2:2015 Plastics – Determination of thermal conductivity and thermal diffusivity – Part 2: Transient plane heat source (Hot disk) method.

[14] ZLATEVA, P. - PETKOVA-SLIPETS R.: Comparative analysis of the results of measurements of the thermal conductivity of the insulating coating AKTERM. Proceedings of University of Ruse -2014, Vol. 53, book 1.2, 2014, pp. 47 - 51.

Civil and Environmental Engineering

Stavebné a environmentálne inžinierstvo

Journal Information

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 82 82 41
PDF Downloads 72 72 29