Numerical Simulation Of Moving Vehicle Across the Obstacle

Open access

Abstract

Vehicle excitation by passing over pavement unevenness represents the actual problem which is solved on many departments in this time. The numerical methods are mainly applied for the solutions of the interaction of similar systems. The Finite Element Method (FEM) is the best-known and widely used. It provides appropriate accuracy. In this article, commercial computer software ADINA based on the FEM is used to solve kinematic excitation of vehicle. The 2D model of vehicle which represents real type of lorry T-815 is excited by simulation of passage across obstacle. There are compared dynamic responses of the vehicle on the kinematic excitation at different speeds.

[1] BATHE, K. J.: Finite Element Procedures. Cambridge, MA: Klaus - Jürgen Bathe, 2006.

[2] LAJČÁKOVÁ, G. - MARTINICKÁ, I. - MELCER, J. - DANIEL, Ľ.: Influence of pavement unevenness on its straining. In: Civil and environmental engineering, vol. 8, 2012, no. 1, p. 63 -77, ISSN 1336-5835.

[3] DANIEL, Ľ.: Vehicle-road interaction (Interakcia v sústave vozidlo - jazdná dráha), Práca ŠVOČ, SvF, ŽU, Žilina, 2012.

[4] MARTINICKÁ, I.: Výpočet vlastných frekvencií a tvarov vlastného kmitania výpočtových modelov vozidiel, In: Pozemné komunikácie a dráhy. ISSN 1336-7501. Roč. 6, č. 1-2 , s. 41-50, 2010.

[5] FRÝBA, L.: Vibration of Solids and Structures Under Moving Loads. ACADEMIA, Praha, Nordhoff International Publishing, Groningen, 1972.

[6] BENČA, Š.: Výpočtové postupy MKP pri riešení lineárnych úloh mechaniky, Strojnícka fakulta STU v Bratislave, 2005.

Civil and Environmental Engineering

Stavebné a environmentálne inžinierstvo

Journal Information

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 94 90 3
PDF Downloads 45 43 3