Civil Engineering – Ongoing Technical Research. Part 2

Open access

[1] L. Czarnecki and D. Van Gemert, “Civil Engineering – Ongoing Technical Research. Part I”, Bull. Pol. Ac.: Tech. 64 (4), 661‒663 (2016).

[2] L. Czarnecki and D. Van Gemert, “Scientific basis and rules of thumb in civil engineering: Conflict or harmony?”, Bull. Pol. Ac.: Tech. 64 (4), 665‒673 (2016).

[3] L. Czarnecki, “Material model and revealing the truth”. Bull. Pol. Ac.: Tech. 63 (1), 7–14 (2015).

[4] E. Szewczak and A. Piekarczuk, “Performance evaluation of the construction products as a research challenge. Small error – big difference in assessment?”, Bull. Pol. Ac.: Tech. 64 (4), 675‒686 (2016).

[5] L. Brunarski and M. Dohojda, “An approach to in-situ compressive strength of concrete”, Bull. Pol. Ac.: Tech. 64 (4), 687‒695 (2016).

[6] R. Geryło, “Energy-related conditions and envelope properties for sustainable buildings”, Bull. Pol. Ac.: Tech. 64 (4), 697‒707 (2016).

[7] J. Fangrat, “Combustibility of building products versus fire safety”. Bull. Pol. Ac.: Tech. 64 (4), 709‒717 (2016).

[8] W. Węgrzyński and P. Sulik, “The philosophy of fire safety engineering in the shaping of civil engineering development”, Bull. Pol. Ac.: Tech. 64 (4), 719‒730 (2016).

[9] J. Wawrzeńczyk, T. Juszczak, and A. Molendowska, “Determining equivalent performance for frost durability of concrete containing different amounts of ground granulated blast furnace slag”, Bull. Pol. Ac.: Tech. 64 (4), 731‒737 (2016).

[10] P. Obara and W. Gilewski, “Dynamic stability of moderately thick beams and frames with the use of harmonic balance and perturbation methods”, Bull. Pol. Ac.: Tech. 64 (4), 739‒750 (2016).

[11] M. Kadela, “Model of multiple-layer pavement structure-subsoil”, Bull. Pol. Ac.: Tech. 64 (4), 751‒762 (2016).

[12] M. Iwański, P. Buczyński, and G. Mazurek, “The use of gabbro dust in the cold recycling of asphalt paving mixes with foamed bitumen”, Bull. Pol. Ac.: Tech. 64 (4), 763‒773 (2016).

[13] T. Tracz, “Open porosity of cement pastes and their gas permeability”, Bull. Pol. Ac.: Tech. 64 (4), 775‒783 (2016).

[14] W. Ru, L. Jian, Z. Tao, and L. Czarnecki, “Chemical interaction between polymer and cement in polymer-cement concrete”, Bull. Pol. Ac.: Tech. 64 (4), 785‒792 (2016).

[15] L. Czarnecki and D. Van Gemert, “Innovation in construction materials engineering versus sustainable development”, Bull. Pol. Ac.: Tech. 65 (6), 765‒772 (2017).

[16] J. Zapała-Sławeta and Z. Owsiak, “Effect of lithium nitrate on the reaction between opal aggregate and sodium and potassium hydroxides in concrete over a long period of time”, Bull. Pol. Ac.: Tech. 65 (6), 772‒778 (2017).

[17] A. Chomicz-Kowalska, “Laboratory testing of low temperature asphalt concrete produced in foamed bitumen technology with fiber reinforcement”, Bull. Pol. Ac.: Tech. 65 (6), 779‒790 (2017).

[18] A. Piekarczuk, “Test-supported numerical analysis for evaluation of the load capacity of thin-walled corrugated profiles”, Bull. Pol. Ac.: Tech. 65 (6), 791‒798 (2017).

[19] W. Buczkowski, A. Szymczak-Graczyk, and Z. Walczak, “Experimental validation of numerical static calculations for a monolithic rectangular tank with walls of trapezoidal cross-section”, Bull. Pol. Ac.: Tech. 65 (6), 799‒804 (2017).

[20] M. Rucka, W. Witkowski, J. Chróścielewski, S. Burzyński, and K. Wilde, “A novel formulation of 3D spectral element for wave propagation in reinforced concrete”, Bull. Pol. Ac.: Tech. 65 (6), 805‒814 (2017).

[21] M. Basińska, “The use of multi-criteria optimization to choose solutions for energy-efficient buildings”, Bull. Pol. Ac.: Tech. 65 (6), 815‒826 (2017).

Bulletin of the Polish Academy of Sciences Technical Sciences

The Journal of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 1.156
5-year IMPACT FACTOR: 1.238

CiteScore 2016: 1.50

SCImago Journal Rank (SJR) 2016: 0.457
Source Normalized Impact per Paper (SNIP) 2016: 1.239

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 149 149 27
PDF Downloads 71 71 20