Experimental Researches Regarding the Distribution of the Deformations on Incremental Formed Parts

Open access

Abstract

The goal of this research is to present results regarding the variation of the deformations on the surface of the incremental formed parts. The experiments were performed on a custom layout by means of a KUKA industrial robot and the measurement of the sheet metal deformations was done using ARAMIS optical measurement system. The custom layout allows for the measurement of the deformations to take place during the actual forming process

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Ambrogio G. De Napoli L. Filice L. Gagliardi F. (2005) Application of Incremental Forming process for high customized medical product manufacturing Journal of Materials Processing Technology p. 156-162.

  • Cofaru N. Oleksik V. Pascu A. (2008) Finite element simulations regard different alternatives of the single point incremental forming process Proceedings of the 1st Wseas International Conference on Visualization Imaging and Simulation Bucharest Romania p. 167-172.

  • Hagan E. Jeswiet J. (2003) A review of conventional and modern single-point sheet metal forming methods Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 217 p. 213-225.

  • Jeswiet J. Micari F. Hirt G. Bramley A. Duflou J. Allwood J. (2005) Asymmetric single point incremental forming of sheet metal CIRP Annals Manufacturing Technology Volume 54 Issue 2 p. 623-650.

  • Meier H. Buff B. Laurischkat R. Smukala V. (2009) Increasing the part accuracy in dieless robot-based incremental sheet metal forming CIRP Annals - Manufacturing Technology 58 p. 233-238.

  • Oleksik V. Pascu A. Deac C. Fleaca R. Roman M. (2009) Numerical Simulation of the Incremental Forming Process for Knee Implants Proc. X International Conference on Computational Plasticity Fundamental and Applications.

  • Oleksik V. Pascu A. Găvruş A. Oleksik M. (2010) Experimental studies regarding the single point incremental forming process Academic Journal of Manufacturing Engineering Vol. 8 No. 2 p. 51-56.

  • Rauch M. (2009) Tool path programming optimization for incremental sheet forming applications Computer-Aided Design 41 p. 877-885.

  • Sasso M. Callegari M. Amodio D. (2008) Incremental forming: an integrated robotized cell for production and quality control Meccanica 43 p. 153-163.

  • Schafer T. Schraft R.D. (2005) Incremental sheet metal forming by industrial robots Rapid Prototyping Journal 11/5 p. 278-286.

  • Vihtonen L. Puzik A. Katajarinne T. (2008) Comparing Two Robot Assisted Incremental Forming Methods: Incremental Forming by Pressing and Incremental Hammering Int J Mater Form Suppl. 1 p.1207 -1210

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 173 123 3
PDF Downloads 65 54 1