The Possibility of Increasing the Wearing Resistance of Mulcher Tools

Open access

Abstract

This paper presents a utilization of mulcher tools, their wear and possibilities of increasing their lifetime and durability based on analysis and tests. Mulcher tools are subjected to a very strong wear causing the loss of soldered WC tips in some cases and even permanent deformation of the body tool made of steel 14 220 (16MnCr5) during the continuous use. Images depicting the loss of material from the mulcher tool due to wear were produced by overlaying the pre- and after-wear tools by means of the optical scanning system. Input analyses - measuring of hardness, impact test and evaluating of microstructure showed that forging is without heat treatment. This does not provide sufficient mechanical properties to tools that would ensure work continuation after losing WC tips. Therefore, an appropriate process of heat treatment of the tool body has been proposed. By comparing the loss of material using abrasive test, it was observed that the wear of heat-treated material was three times lower than of material without heat treatment. This gives the precondition for increasing the resistance of the tool body and thus increasing of lifetime and durability after loss of WC tips. The implementation of such a solution could bring not only technical but also economic benefits.

BLAŠKOVIČ, P. - BALLA, J. - DZIMKO, M. 1990. Tribology. Bratislava : Alfa. 360 pp. ISBN 80-05-00633-0.

BROŽEK, M. - NOVÁKOVÁ, A. 2008. Evaluation of sintered carbides wear resistance. Available online at: http://tf.llu.lv/conference/proceedings2008/Papers/40_Brozek.pdf [viewed 14.3.2018]

BUCKLEY, D. H. 1981. Surface Effects in Adhesion, Friction, Wear and Lubrication. Tribology Series 5. Amsterdam-Oxford-New York : Elsevier Scientific Publishing Company. 631 pp.

ČSN 01 5084. 1974. Determination of metal material resistance against wear by abrasive cloth. ÚNM Praha. Forestry Mulchers [online] [viewed 14.05.17]. Available: www.seppi.com/en/mulcher-mower-shredder-tiller-stump-grinder/forestrymulchers.html.

HDT Prinoth. Available online at: https://www.prinoth.com/en/vegetation-management/products/teeth/hdt-176/ [viewed 14.5.2017]

HNILICA, R. - MESSINGEROVÁ, V. - STANOVSKÝ, M. 2015. Possibilities of mechanization of work on forest founding and education. (Scientific monography). 99 pp. ISBN 978-80-228-2722-5.

HNILICOVÁ, M. - HNILICA, R. - DADO, M. 2016. Technique and technology in the upbringing and cultivation of the forest. In Increasing the Life of Tools and Structural Parts of Mechanisms. Zvolen : Technická univerzita, 2016. pp. 16-26. ISBN 978-80-228-2862-8.

KALINCOVÁ, D. - ŤAVODOVÁ, M. 2016. Analysis of the mulcher tools wear - methods for increasing of wear resistance. In Increasing the Life of Tools and Structural Parts of Mechanisms. Zvolen : Technická univerzita, 2016, pp. 52-58. ISBN 978-80-228-2862-8.

KINGKONG-TOOLS. Available online at: www.kingkong-tools.com [viewed 14.5.2017]

KOVÁČ, I. - TOLNAI, R. 2006. Zlepšenie mechanických vlastností povrchových vrstiev ocelí 14 220 a 15 230 nasýtených bórom. In Acta Technologica Agriculturae, vol. 9, no. 1, pp. 1-3.

KRAUZE, K. - BOŁOZ, Ł. - WYDRO T. 2015. Parametric factors for the tangential-rotary picks quality assessment. In Archives of Mining Sciences, vol. 60, no. 1, pp. 265-281.

ĽUPTÁČIKOVÁ, V. 2016. Options rototillers categorized according to the use of working tools. In Colloquium to grant no. 1/0826/15, scientific peer-reviewed collection, pp. 80-89. ISBN 978-80-228-2920-5.

MÜLLER, M. - HRABĚ, P. 2013. Overlay materials used for increasing lifetime of machine parts working under conditions of intensive abrasion. In Research in Agricultural Engineering, vol. 59, no. 1, pp. 16-22.

STN 01 5084. 1974. Determination of metal material resistance against wear by abrasive cloth. SÚTN Bratislava.

STN 41 4220. 1976 Manganese-chromium steel 14 220. SÚTN Bratislava.

STN EN ISO 148-1. 2017 Metallic materials - Charpy pendulum impact test. Part 1: Test method. SÚTN Bratislava.

STN EN ISO 6507-1. 2006. Metallic materials. Vickers hardness test. Part 1: Test method. SÚTN Bratislava.

ŤAVODOVÁ M. - KALINCOVÁ, D. - HNILICOVÁ, M. - HNILICA, R. 2016. The influence of heat treatment on tool properties mulcher. In Manufacturing Technology, vol. 16, no. 5, pp. 1169-1173.

Tolnai, R. - Čičo , P. - Kováč , I. 2006. Impact strength of steels as a criterion of material resistance. In Acta Technologica Agriculturae, vol. 9, no. 1, pp. 17-19.

VIŇÁŠ, J. - BREZINOVÁ, J. - GUZANOVÁ, A. - LORINCOVÁ, D. 2011. Properties of renovation layers applied by submerged arc welding. In Chemické Listy, vol. 105, no. 17, pp. 858-859.

Votava , J. - Černý , M - Filípek, J. 2005. Vliv tepelného zpracování na abrazivní opotřebení. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. LIII, no. 5, pp. 175-185.

Votava , J. 2014. Usage of abrasion-resistant materials in agriculture. In Journal of Central European Agriculture, vol. 15, no. 2, pp. 119-128.

Acta Technologica Agriculturae

The Scientific Journal for Agricultural Engineering The Journal of Slovak University of Agriculture in Nitra

Journal Information

CiteScore 2018: 0.98

SCImago Journal Rank (SJR) 2018: 0.315
Source Normalized Impact per Paper (SNIP) 2018: 0.986

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 226 180 25
PDF Downloads 182 131 9