Rock Failure Analysis Based on a Coupled Elastoplastic-Logarithmic Damage Model

Open access


The rock materials surrounding the underground excavations typically demonstrate nonlinear mechanical response and irreversible behavior in particular under high in-situ stress states. The dominant causes of irreversible behavior are plastic flow and damage process. The plastic flow is controlled by the presence of local shear stresses which cause the frictional sliding. During this process, the net number of bonds remains unchanged practically. The overall macroscopic consequence of plastic flow is that the elastic properties (e.g. the stiffness of the material) are insensitive to this type of irreversible change. The main cause of irreversible changes in quasi-brittle materials such as rock is the damage process occurring within the material. From a microscopic viewpoint, damage initiates with the nucleation and growth of microcracks. When the microcracks length reaches a critical value, the coalescence of them occurs and finally, the localized meso-cracks appear. The macroscopic and phenomenological consequence of damage process is stiffness degradation, dilatation and softening response. In this paper, a coupled elastoplastic-logarithmic damage model was used to simulate the irreversible deformations and stiffness degradation of rock materials under loading. In this model, damage evolution & plastic flow rules were formulated in the framework of irreversible thermodynamics principles. To take into account the stiffness degradation and softening on post-peak region, logarithmic damage variable was implemented. Also, a plastic model with Drucker-Prager yield function was used to model plastic strains. Then, an algorithm was proposed to calculate the numerical steps based on the proposed coupled plastic and damage constitutive model. The developed model has been programmed in VC++ environment. Then, it was used as a separate and new constitutive model in DEM code (UDEC). Finally, the experimental Oolitic limestone rock behavior was simulated based on the developed model. The irreversible strains, softening and stiffness degradation were reproduced in the numerical results. Furthermore, the confinement pressure dependency of rock behavior was simulated in according to experimental observations.

Addessi D., Marfia S., Sacco., E. 2002. A Plastic Nonlocal Damage Model. Computer Methods in Applied Mechanics and Engineering 191 (13-14), 1291-1310.

Bazant Z.P., Kim S.S., 1979. Plastic-Fracturing Theory for Concrete. ASCE Journal of Engineering Mechanics 105 (3), 407-421.

Brady B.H.G., Brown E.T., 2005. Rock Mechanics for underground mining. Springer Science.

Carol I., Rizzi E., Willam K., 2001. On the formulation of anisotropic elastic degradation. I. Theory based on a pseudo-logarithmic damage. International Journal of Solids and Structures 38: 491-518.

Chiarellia A.S., Shao J.F., Hoteit N., 2003. Modeling of elastoplastic damage behavior of a claystone. International Journal of Plasticity 19, 23-45

Conil N., Djeran-Maigre I., Cabrillac R., Su K., 2004. Thermodynamics modelling of plasticity and damage of argillite. C. R. Mecaniqu 332; 841-848.

Dragon A., Morz Z., 1979. A Continuum Theory for Plastic-Brittle Behavior of Rock and Concrete. International Journal of Engineering Scienc 17 (2), 121-137.

Hansen E., Willam K., Carol I., 2001. A Two-Surface Anisotropic Damage/Plasticity Model for Plain Concrete, in Fracture Mechanics of Concrete Materials, de Borst, R. (Ed.), A.A. Balkema, Rotterdam, 549-556.

Jefferson A.D., 2003. Craft - A Plastic-Damage-Contact Model for Concrete. I. Model Theory and Thermodynamic Considerations. International Journal of Solids and Structure 40 (22), 5973-5999.

Kamal B., Thapa, Yazdani S., 2013. Combined damage and plasticity approach for modeling brittle materials with application to concrete. International Journal of Civil And Structural Engineering 3, 513-525.

Lemaitre J., Desmorat R., 2005. Engineering Damage Mechanics. Springer-Verlag Berlin Heidelberg.

Li Y., Zhu W., Fu J., Guo Y., Qi Y., 2014. A damage rheology model applied to analysis of splitting failure in underground caverns of Jinping I hydropower station. International Journal of Rock Mechanics and Mining Sciences 71.

Molladavoodi H., 2015. Sliding and damage criteria investigation of a micromechanical damage model for closed frictional microcracks. Computers and Geotechnics 67, 135-141.

Molladavoodi H., Mortazavi A., 2011. A damage-based numerical analysis of brittle rocks failure mechanism. Finite Elements in Analysis and Design 9, 911-1003.

Mortazavi A., Molladavoodi H., 2012. A numerical investigation of brittle rock damage model in deep underground openings. Engineering Fracture Mechanics 90, 101-120.

Ortiz M., 1985. A Constitutive Theory for the Inelastic Behavior of Concrete. Mechanics of materials 4 (1), 67-93.

Ortiz M., Popov E.P., A., 1982. Physical Model for the Inelasticity of Concrete. Proceedings of Royal Society of London A383, 101-125.

Rashid K., Abu Al-Rub, George Z. Voyiadjis. 2003. On the coupling of anisotropic damage and plasticity models for ductile materials. International Journal of Solids and Structures 40; 2611-2643.

Salari M.R., Saeb S., Willam K.J., Patchet S.J., Carrasco R.C., 2004. A Coupled Elastoplastic Damage Model for Geomaterials. Computer Methods in Applied Mechanics and Engineering 193 (27-29), 2625-2643.

Simo J.C., Ju. J.W., 1987. Strain-and-Stress-Based Continuum Damage Models - I. Formulation. International Journal of Solids Structures 23 (7), 821-840.

Shao J.F., Jia Y., Kondo D., Chiarelli A.S., 2006. A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions. Mechanics of Materials 38, 218-232.

Voyiadjis G.Z., Taqieddin Z.N., Kattan P.I., 2008. Anisotropic Damage-Plasticity Model for Concrete. International Journal of Plasticity 24 (10), 1946-1965.

Wang H., Li Y., Li S., Zhang Q., Liu J., 2016. An elasto-plastic damage constitutive model for jointed rock mass with an application. Geomechanics and Engineering 11 (1).

Yazdani S., Karnawat S., 1996. A Constitutive Theory for Brittle Solids with Application to Concrete. International journal of damage mechanics 5 (1), 93-110.

Yazdani S., Schreyer H.L., 1990. Combined Plasticity and Damage Mechanics Model for Plain Concrete. ASCE Journal of Engineering Mechanics 116 (7), 1435-1450.

Zhang W., Cai Y., 2001. Continuum Damage Mechanics and Numerical Applications. Springer.

Zhu Q.Z., Shao J.F., Kondo D., 2008. Micromechanical analysis of coupling between anisotropic damage and friction in quasi brittle materials: role of the homogenization scheme. Int. J. Solids Struct. 45, 1385-405.

Archives of Mining Sciences

The Journal of Committee of Mining of Polish Academy of Sciences

Journal Information

IMPACT FACTOR 2016: 0.550
5-year IMPACT FACTOR: 0.610

CiteScore 2016: 0.72

SCImago Journal Rank (SJR) 2016: 0.320
Source Normalized Impact per Paper (SNIP) 2016: 0.950


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 193 193 16
PDF Downloads 96 96 16