Properties and Structure of Nanocrystalline Layers Obtained by Manual Metal Arc Welding (MMA)

Open access

Abstract

The present paper is the result of the investigations of the properties and structure of nanocrystalline layers deposited from iron-based nanoalloy on steel S355N substrate by manual metal arc welding method (MMA). In the process of welding a 100 A current intensity was used with desiccation preheating at 80°C while maintaining the interpass temperature at range of 200°C. The resultant deposit welds were subjected to macro and microscopic metallographic examination, X-ray phase analyses and crystallite size was analyzed by X-ray diffractometry (XRD), additionally EDX chemical composition analysis of precipitates during scanning electron microscopy was performed. Working properties of the obtained nanocrystalline deposit welds were evaluated based on hardness and metal-to-mineral abrasive wear. The results of the deposit welds working properties measurements were compared with the properties of wear resistant steel HARDOX 400 type used as the reference material.

[1] Ch.P. Jr Poole, F.J. Ownes, Introduction to Nanotechnology, Wiley-VCH, Weinheim (2003).

[2] S. Boncel, J. Górka, S. Milo, P. Shaffer, K. Koziol, Polym. Composite. 35 (3), 523-529 (2014).

[3] G. Heath, Nanotechnology and welding - actual and possible future applications, CASTOLIN-EUTECTIC SEMINAR, Brussels, Belgium, (2006).

[4] J. Górka, A. Czupryński, Applied Mechanics and Materials, 809-810, 501-506 (2015).

[5] S. Boncel, J. Górka, S. Milo, P. Shaffer, K. Koziol, Mater. Lett. 116, 53-56 (2014).

[6] U. Reisgen, L. Stein, B. Balashov, C. Geffers, Materialwiss. Werkst. 39 (11), 791-794 (2008).

[7] A. Czupryński, J. Górka, M. Adamiak M, Metalurgija 55 (2), 173-176 (2016).

[8] A. Lisiecki, Metals 5 (1), 54-69 (2015).

[9] D. Janicki, M. Musztyfaga-Staszuk, Stroj. Vestn-J. Mech. E. 62 (6), 363-372 (2016).

[10] M. Żuk, J. Górka, A. Czupryński, M. Adamiak, Metalurgija 55 (4), 613-616 (2016).

[11] A. Grajcar, M. Różański, S. Stano, A. Kowalski, J. Mater. Eng. Perform. 23 (9), 3400-3406 (2014).

[12] T. Chmielewski, D. Golański, W. Włosiński, B. Pol. Acad. Sci-Tech. 63 (2), 449-456 (2015).

[13] A. Grajcar, K. Radwański, H. Krztoń, Solid State Phenomena, 203-204, 34-37 (2013).

[14] M. Opiela, J. Mater. Eng. Perform. 9, 3379-3388 (2014).

[15] D. Janicki, Opt. Laser Technol. 94, 6-14, (2017).

[16] T. Chmielewski, A. Golański, P. I. Mech. Eng. B-J. Eng. 225, 611-616 (2011).

[17] D. Golański, G. Dymny, M. Kujawińska, T. Chmielewski, Solid State Phenomena, 240, 174-182 (2015).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 181 172 12
PDF Downloads 76 70 6