Selected Problems of the Microstructure Evolution During Microalloyed Steel Wire Rod Production Process

Open access

Abstract

In the present study, we have discussed the selected problems of microstructure development during the whole manufacturing process, i.e. continuous casting, thermomechanical processing, and cold metal forming of the microalloyed steels wires. In the investigated steels, the microstructure development was controlled by the history of deformation and by the effects of microalloying elements, mostly Nb, Ti, and B. It has been concluded that obtained in the ultrafine grained microalloyed steel wires mechanical properties were first of all resulting from specific structural composition and grain refinement. Additionally, it has been proven that austenite grain refinement, that increases nucleation rate during the austenite-to-ferrite phase transformation, as a result of the thermomechanical processing, are very beneficial from point of view of the final mechanical properties. This problem starts to be very important when the microalloyed steel products are subjected to severe plastic deformation, as it has been shown discussed in the present work for combined processes of wire drawing and wire flattening.

[1] N. Murty, S. Torizuka, Mater. Sci. Forum 633-634, 211-221 (2010).

[2] H.S. Zurob, C.R. Hutchinson, Y. Brechet, G. Purdy, Acta Mater. 50, 3075-3092 (2002).

[3] B. Santillana, D.G. Eskin, R. Boom, L. Katgerman, Mater. Sci. Eng. 27, 1-6 (2011).

[4] A.G Kostryzhev, C.D. Slater, O.O. Marenych, C.L. Davis, Scientific Reports 6 (2016).

[5] J.S. Ha, J.R. Cho, B.Y. Lee, M. Y. Ha, J. Mater. Process. Technol. 113 (1), 257-261 (2001).

[6] K. Miłkowska-Piszczek, J. Falkus, METABK 53, 571-573 (2014).

[7] S. Vervynckta, K. Verbekena, P. Thibauxc, Y. Houbaert, Mater. Sci. Eng. A 528, 5519-5528 (2011).

[8] K. Muszka, D. Dziedzic, Ł. Madej, J. Majta, Mater. Sci. Eng. A 610, 290-296 (2014).

[9] H. Mirzadeh, J.M. Cabrera, J.M. Prado, A. Najafizadeh, Mater. Sci. Eng. A 528, 3876-3882 (2011).

[10] E. López-Martínez, O. Vázquez-Gómez, H.J. Vergara-Hernández, B. Campillo, Int. J. Miner. Metall. Mater. 22, 1304-1312 (2015).

[11] J. Majta, K. Muszka, M. Kwiecień, M. Stefańska-Kądziela, P. Graca, Key. Eng. Mat. 622-623, 249-256 (2014).

[12] K. Muszka, Ł. Madej, J. Majta, Mater. Sci Eng. A 574, 68-74 (2013).

[13] C. Nagasaki, M. Kaga, K. Shibata, K. Asakura, M. Hatano, ISIJ International 42, 57-S6, (2002).

[14] M. Wielgus, J. Majta, J. Łuksza, P. Paćko, Steel Res. Int. 81, 490-493 (2010).

[15] K. Muszka, P.D. Hodgson, J. Majta, J. Mater. Process. Technol. 177 (1), 456-460 (2006).

[16] K. Muszka, P. Graca, T. Simm, E. Palmiere, Key Eng. Mater. 622-623, 1023-1030 (2014).

[17] J. Majta, K. Muszka, L. Madej, M. Kwiecien, P. Graca, Manufact. Sci. Techn. 3 (4), 134-140 (2015).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 173 173 11
PDF Downloads 69 69 6