Analysis of Thermal Stability of CrCN Coatings Deposited on Nitrided Substrates Using Modulated Temperature Thermodilatometry

Open access

Abstract

The aim of the research was to investigate the influence of nitriding of the substrate made of 42CrMo4 steel on thermal stability of the antiwear CrCN coating deposited on its surface using Cathodic Arc Evaporation method. Samples of non-nitrided and nitrided substrate/CrCN coating systems were tested with Modulated Temperature Thermodilatometry, which program included system annealing in 26 h, temperature of 290°C and argon atmosphere. Recorded during tests, changes in substrate elongation in response for changes of sample temperature, enabled qualitative determination of changes in stress states in the coatings as a result of samples annealing. Annealing of the system with nitrided substrate resulted in smaller change in residual stress in coating than for the system with non-nitrided substrate, which can indicate its better thermal stability. Values of residual stresses in coatings calculated by sin2ψ method before and after annealing on the basis of tests performed using X-Ray diffraction, agree with results of dilatometric tests.

[1] L. Hultman, Vacuum 57, 1-30 (2000).

[2] F.H. Lu, H.Y. Chen, Thin Solid Films 398-399, 368-373 (2001).

[3] C. Fitz, A. Kolitsch, W. Fukarek, Thin Solid Films 389, 173-179 (2001).

[4] M. Bielawski, D. Seo, Surf. Coat. Technol. 200, 1476-82 (2005).

[5] L. Karlsson, L. Hultman, M.P. Johansson, A. Hörling, G. Ramanath, The influence of thermal annealing on residual stresses mechanical properties of arc-evaporation TiN and TiCxN1/x thin films. Proc. Thin Film Physics Division 162-189, Linköping University, Sweden (1999).

[6] Ł. Szparaga, P. Myśliński, A. Gilewicz, J. Ratajski, Solid State Phenom. 223, 100-109 (2014).

[7] R. Daniel, D. Holec, M. Bartosik, J. Keckes, C. Mitterer, Acta Mater. 59, 6631-6645 (2011).

[8] X. Pang, K. Gao, F. Luo, H. Yang, L. Qiao, Y. Wang, A.A. Volinsky, Thin Solid Films 516, 4685-4689 (2008).

[9] M. Bielawski, Surf. Coat. Technol. 200, 3987-3995 (2006).

[10] C. Kirchlechner, K.J. Martinschitz, R. Daniel, C. Mitterer, J. Keckes, Thin Solid Films 517, 1167-1171 (2008).

[11] J. Bonarski, J. Smolik, L. Tarkowski, M. Biel, Arch. Metall. Mater. 53, 49-55 (2008)

[12] H.C. Barshilia, M. Surya Prakasha, A. Jainb, K.S. Rajama, Vacuum 77, 169-179 (2005).

[13] P. Myśliński, Vacuum 83, 757-760 (2009).

[14] A. Raveh, I. Zukerman, R. Shneck, R. Avni, I. Fried, Surf. Coat. Technol. 201, 6136-6142 (2007).

[15] C. Mitterer, P.H. Mayrhofer, J. Musil, Vacuum 71, 279-284 (2003).

[16] P. Wieciński, J. Smolik, H. Garbacz, K.J. Kurzydłowski, Solid State Phenom. 237, 47-53 (2015).

[17] M.A. Djouadi, C. Nouveau, O. Banakh, R. Sanjines, F. Levy, G. Nouet, Surf. Coat. Technol. 151-152, 510-514 (2002).

[18] H.C. Barshilia, K.S. Rajama, J. Mater. Res. 19, 3196-3205 (2004).

[19] C. Héaua, R.Y. Fillitb, F. Vauxa, F. Pascarettia, Surf. Coat. Technol. 120-121, 200-205 (1999).

[20] A. Gilewicz, R. Olik, L. Szparaga, J. Ratajski, Maintenance Problems 3, 27-43 (2014).

[21] R. Rodríguez-Baracaldoa, J.A. Benitob, E.S. Puchi-Cabrerad, M.H. Staiad, Wear 262, 380-389 (2007).

[22] P. Myśliński, Dylatometryczna metoda detekcji efektów termomechanicznych w systemach podłoże-powłoka PVD, Wydawnictwo Uczelniane Politechniki Koszalińskiej (2011).

[23] D.M. Price, Thermochim. Acta 23, 357-358 (2000).

[24] D.M. Price, J. Therm. Anal. Calorim. 64, 323-330 (2001).

[25] P. Myśliński, P. Kamasa, A. Gilewicz, J. Phys. 564 (2014).

[26] P. Myśliński, P. Kamasa, A. Wąsik, J. Therm. Anal. Calorim. 65, 553-559 (2001).

[27] P. Myśliński, L. Szparaga, P. Kamasa, A. Gilewicz, J. Ratajski, J. Therm. Anal. Calorim. 120, 1609-1615 (2015).

[28] Ł. Szparaga, P. Myśliński, A. Gilewicz, J. Ratajski, Solid State Phenom. 223, 100-109 (2014).

[29] P. Myśliński, W. Precht, L. Kukiełka, P. Kamasa, K. Pietruszka, P. Małek, J. Therm. Anal. Calorim. 77, 253-258 (2004).

[30] P. Myśliński, P. Kamasa, A. Gilewicz, J. Staśkiewicz, J. Therm. Anal. Calorim. 88, 737-740 (2007).

[31] S.J. Skrzypek, A. Baczmanski, W. Ratuszek, E. Kusior, J. Appl. Crystallogr. 34, 427-435 (2001).

[32] C. Kirchlechner, K.J. Martinschitz, R. Daniel, M. Klaus, C. Genzel, C. Mitterer, J. Keckes, Thin Solid Films 518, 2090-2096 (2010).

[33] P. Myśliński, A. Gilewicz, R. Olik, Ł. Szparaga, K. Mydłowska, J. Ratajski, J. Therm. Anal. Calorim. 125 (3), 1273-1278 (2016)

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 106 106 8
PDF Downloads 53 53 8