Corrosion Resistance of Some Stainless Steels in Chloride Solutions

Open access

Abstract

The present work compares corrosion behaviour of four types of S30403, S31603, S32615 austenitic and S32404 austenitic-ferritic stainless steels in chloride solutions (1%, 3% NaCl) and in Ringer solution, at 37°C temperature. Corrosion resistance was determined by potentiodynamic polarization measurements and a thirty day immersion test conducted in Ringer solution. The immersion test was performed in term of biomedical application. These alloy were spontaneously passivated in all electrolytes, wherein S30403, S31603 and S32404 undergo pitting corrosion. Only S32615 containing 5.5% Si shows resistance to pitting corrosion.

[1] S. Ahmad, A.U. Malik, J. Appl. Electrochem. 31, 1009 (2001).

[2] A.U. Malik, S. Ahmad, I. Andijani, Desalination 123, 205 (1999).

[3] A.A. Hermas, J. Mat. Sci. 36, 3415 (2001).

[4] D. Kasprzyk, B. Stypuła, Corrosion Protection 55, 508 (2012).

[5] I. Milosev, H.H. Strehblow, J. Biomed. Res. 52, 404 (2000).

[6] A. Kocijan, D.K. Merl, M. Jenko, Corros. Sci. 53, 776 (2011).

[7] J.A. Platt, A. Guzman, A. Zuccari, et al., Am. J. Orthod. Dentofac. Orthop. 112, 69 (1997).

[8] A.U. Malik, N.A. Siddiqi, et al., Corros. Sci. 37, 1521 (1995).

[9] H.C. Brookes, F.J. Graham, Corrosion 45, 287 (1989).

[10] R. Perren, T. Suter, P. Uggowitzer, et al., Corros. Sci. 43, 707 (2001).

[11] K. Sieradzki, R.C. Newman, J. Electrochem. Soc. 133, 1979 (1986).

[12] K. Asami, K. Hashimoto, S. Shimodaira, Corros. Sci. 18, 151 (1978).

[13] D. Kasprzyk, B. Stypuła, P. Kuśtrowski, M. Drozdek, Arch. of Metall. Mater. 58, 1169 (2013).

[14] Y. Okazaki, E. Gotoh, Corros. Sci. 50, 3429 (2008).

[15] G. Herting, I. Odnevall Wallinder, C. Leygraf, Corros. Sci. 49, 103 (2007).

[16] J. Horvath, H.H. Uhlig, J. Electrochem. Soc. 115, 791 (1968).

[17] K. Lorenz, G. Medawar, Thyssen Forsch. 1, 97 (1969).

[18] B. Stypula, D. Kasprzyk, M. Hajos, Archiv of Metallurgy and Matter. 54, 305 (2009).

[19] M. Holtzer, Werkstoffe und Korrosion 41, 25 (1990).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 310 310 27
PDF Downloads 143 143 17