Investigation of the Microstructure and Thermoelectric Properties of P-Type BiSbTe Alloys by Usage of Different Revolutions Per Minute (RPM) During Mechanical Milling

Open access

Abstract

In this work, p-type Bi0.5Sb1.5Te3 alloys were fabricated by high-energy ball milling (MA) and spark plasma sintering. Different revolutions per minute (RPM)s were used in the MA process, and their effect on microstructure, and thermoelectric properties of p-type Bi0.5Sb1.5Te3 were systematically investigated. The crystal structure of milled powders and sintered samples were characterized using X-ray diffraction. All the powders exhibited the same morphology albeit with slight differences find at 1100 RPM conditions. A slight grain size refinement was observed on the fracture surfaces from 500 to 1100 RPM specimens. The temperature dependence of Seebeck coefficient, electrical conductivity, and power factors were measured as a function of temperature with different RPM conditions. The power factor shows almost same (~3.5 W/mK2 at RT) for all samples due to unchanged Seebeck and electrical conductivity values. The peak ZT of 1.07 at 375K is obtained for 1100 RPM specimen due to low thermal conductivity.

[1] G.J. Snyder, E.S. Toberer, Nat. Mater. 7, 105 (2008).

[2] T.M. Tritt, H. Bottner, L.D. Chen, MRS Bulletin 33, 366 (2008).

[3] L.M. Goncalves, C. Couto, P. Alpuim, D.M. Rowe, J.H. Correia, Mater. Research. Forum, 156, 541-516 (2006).

[4] R. Venkatasubramanian, E. Siivola, T. Colpitts, B. O’Quinn, Nature 413, 597 (2001).

[5] W. Xie, J. He, H.J. Kang, X. Tang, S. Zhu, M. Laver, S. Wang, J.R.D. Copley, C.M. Brown, Q. Zhang, T.M. Tritt, Nano Lett. 10, 3283-3289 (2010).

[6] B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M.S. Dresselhaus, G. Chen, Z. Ren, Science 320, 634 (2008).

[7] C. Suryanarayana, Mater. Science 46, 1 (2013).

[8] C.-H. Lee, M.F. Kilicaslan, B. Madavali, S.-J. Hong, Res. Chem. Intermed. 40, 2543 (2014).

[9] M.L. Lwin, S.M Yoon, B. Madavali, C.H. Lee, S.J. Hong, J. Korean Powder Metall. Inst. 23, 120 (2016).

[10] B. Madavali, S.J. Hong, J. Electron. Mater. 45, 6059 (2016).

[11] H.S. Kim, B. Madavali, T.J. Eom, C.M. Kim, J.M. Koo, T.H. Lee, S.J. Hong, Arch. Metall. Mater. 60, 1235 (2015).

[12] Y.H. Yeo, T.S. Oh, Mater. Res. Bull. 58, 54 (2014).

[13] S.J. Hong, B.S. Chun, Mater. Res. Bull. 38, 599 (2003).

[14] K.T. Kim, T.S. Lim, G.H. Ha, Reviews on Adv. Mater. Sci. 28, 196 (2011).

[15] S.T. Han, P. Rimal, C.H. Lee, H.S. Kim, Y. Sohn, S.J. Hong, Intermetallics 78, 42 (2016).

[16] C.D. Moon, T.S. Kim, J. Alloys. Compd. 536S, S559 (2012).

[17] T.S. Kim, B.S. Chun, J.K. Lee, H G. Jung, J. Alloys. Compd. 710, 434 (2007).

[18] J. Yang, T. Aizawa, A. Yamamoto, T. Ohta, Mater. Chem. Phys. 70, 90 (2001).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 225 225 17
PDF Downloads 78 78 6