Selection of basic position in Refill Friction Stir Spot Welding of 2024-T3 and D16UTW aluminum alloy sheets

Open access

Abstract

One of the important parameters of Refill Friction Stir Spot Welding is the so-called basic position of the tool. This is the arrangement of the pin and sleeve which occurs when the tool is plunged into the material. The basic positions can be divided into two categories. In the first category, the sleeve and the pin are above the sheet surface or below sheet surface and in the second category the pin is retracted within the sleeve or protrudes from it.

The aim of the work was to test four settings of the basic position, and then determine the best setting of the basic position, without changing the other welding parameters. Joints made of an aluminum alloy 2024-T3 sheet having a thickness of 1.0 mm and an aluminum alloy D16UTW sheet having a thickness of 0.6 mm were analysed. The best setting of the basic position was determined based on assessment of the force carried in shear test, macrostructure and weld face of the joints.

[1] P. Lacki, K. Wojsyk, K. Kudła, R.E. Śliwa, in: Eberhardsteiner J, H.J. Böhm, F.G. Rammerstorfer (Eds.), Vienna, Austria (2012).

[2] J. Ad amus, P. Lacki, M. Motyka, Arch. Civ. Mech. Eng. 15, 1, 42-47 (2015).

[3] J. Ad amus, Adv. Mat. Res. 1020, 9-14 (2014).

[4] A.C.F. Silva, D.F.O. Braga, M.A.V. De Figueiredo, P.M.G.P. Moreira, Int. J. Adv. Manuf. Technol. 79, 5-8, 805-814 (2015).

[5] P. La cki, Z. Kucharczyk, T. Walasek, Key Eng. Mat. 687, 155-162 (2016).

[6] P. La cki, A. Derlatka, Meccanica 51, 2, 455-462 (2016).

[7] A. De rlatka, K. Kudła, K. Makles, Numerical analysis of RFSSW joints in Proceedings of the jointly organised 11th World Congress on Computational Mechanics (WCCM XI): 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI); Barcelona, Spain, July 20-25, 2014E. Oñate (Ed.), 1st ed.

[8] T. Rose ndo, B. Parra, M. Tier, A. da Silva, J.F. dos Santos, T.R. Strohaecker, N.G. Alcântara, Mater. Design 32, 3, 1094-1100 (2011).

[9] A.A.M. da Silva, J.F. dos Santos, T.R. Rosendo, F.D. Ramos, C.C.P. Mazzaferro, M.A.D. Tier, L. Bergmann, J.A.E. Mazzaferro, T.R. Strohaecker. Warrendale, PA: SAE International (2007).

[10] J.A.E. Mazzaferro, T.S. Rosendo, C.C.P. Mazzaferro, F.D. Ramos, M.A.D. Tier, T.R. Strohaecker, J.F. Santos, Soldagem. Insp. 14, 3, 238-247 (2009).

[11] B. Parra , V.T. Saccon, N.G. de Alcântara, T. Rosendo, J.F. dos Santos, Tecnol. Metal. Mater. Min. 8, 3, 184-190 (2011).

[12] A. Derlat ka, P. Kasza, Adv. Mat. Res. 1020, 151-157 (2014).

[13] A. Derlat ka, P. Kasza, Adv. Mat. Res. 1020, 158-164 (2014).

[14] P.A. Lac ki, J.K. Winowiecka, A.M. Derlatka, Theoretical-experimental analysis of aluminum joints spot welded using rfssw technology in Computational Plasticity XIII: Proceedings of the XIII International Conference on Computational Plasticity - Fundamentals and Applications, held in Barcelona, Spain 1-3 September 2015E. Oñate (Ed.), Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2015.

[15] T. Montag, J.-P. Wulfsberg, H. Hameister, R. Marschner, Procedia CIRP 24, 108-113 (2014).

[16] T. Rosendo , B. Parra, M. Tier, A. da Silva, J.F. dos Santos, T.R. Strohaecker, N.G. Alcântara, Mater. Design 32, 3, 1094-1100 (2011).

[17] A.H. Plain e, U. Suhuddin, N.G. Alcântara, J.F. dos Santos, International Journal of Fatigue 91, 149-157 (2016).

[18] B. Parra, V.T. Saccon, N.G. de Alcântara, T. Rosendo, J.F. dos Santos, Technol. Metal. Mater. Min. 8, 3, 184-190 (2011).

[19] A. Derlatka, P. Lacki, Comput. Method Mater. Sci. 15, 1, 144-149 (2015).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 217 217 17
PDF Downloads 87 87 10