The Effect of Long-Term Impact of Elevated Temperature on Changes in Microstructure and Mechanical Properties of HR3C Steel

Open access

Abstract

The HR3C is a new steel for pressure components used in the construction of boilers with supercritical working parameters. In the HR3C steel, due to adding Nb and N, the compounds such as MX, CrNbN and M23C6 precipitate during service at elevated temperature, resulting in changes in mechanical properties. This paper presents the results of microstructure investigations after ageing at 650, 700 and 750 °C for 5,000 h. The microstructure investigations were carried out using scanning and transmission electron microscopy. The qualitative and quantitative identification of the existing precipitates was carried out using X-ray analysis of phase composition. The effect elevated temperature on microstructure and mechanical properties of the examined steel was described.

[1] J. Dobrzański, Open Access Library, Materials science interpretation of the life of steels for power plants, Gliwice 2011.

[2] Z. Brytan, J. Niagaj, Chiang. Mai. J. Sci. 40, (5), 923-937 (2013).

[3] L.A. Dobrzanski, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupiński, Z. Brytan, J. Mater. Process. Tech. 192, 582-587 (2007).

[4] The Preparation of the Polish Industry for the Construction of Nuclear Power Plants, the current state of activities of the Ministry of Economy, Warsaw 2015.

[5] A. Zieliński, J. Dobrzański, H. Purzyńska, G. Golański, Mater. Test. 57, 859-865 (2015).

[6] J. Barglik, A. Smalcerz, R. Przyłucki, I. Dolezel, J. Comput. Appl. Math. 270, 231-240 (2014).

[7] L.A. Dobrzański, M. Drak, J. Alloy. Compd. 449, (1-2), 88-92 (2008).

[8] A. Zieliński, M. Miczka, B. Boryczko, M. Sroka, Arch. Civ. Mech. Eng. 2016, DOI :10.1016/j.acme.2016.04.010 (in press).

[9] A. Zieliński, G. Golański, M. Sroka, J. Dobrzański, Mater. Sci. Tech-Lond. (2015), DOI : 10.1179/1743284715Y.0000000137 (in press).

[10] L.A. Dobrzański, M. Czaja, W. Borek, K. Labisz, T. Tański, Int. J. Mater. Prod. Tec. 51, (3), 264-280 (2015).

[11] R. Viswanathan, J. Henry, Program on Materials Technology for USC Coal Power Plants, ECCC Creep Conf., London (2005).

[12] A. Zieliński, G. Golański, M. Sroka, T. Tański, Mater. High Temp, DOI : 10.1179/1878641315Y.0000000015 33, (1), 24-32 (2016).

[13] P. Duda, D. Rząsa, J. Therm. Sci. 24, (4), 364-369 (2015).

[14] L.A. Dobrzański, W. Borek, Mater. Sci. Forum. 654-656, (1-3), 266-269 (2010).

[15] T. Tański, K. Labisz, B. Krupińska, M. Krupiński, M. Król, R. Maniara, W. Borek, J. Therm. Anal. Calorim. (2015) DOI 10.1007/s10973-015-4871-y, (in press).

[16] A. Zieliński, G. Golański, M. Sroka, P. Skupień, Mater. High Temp., DOI : 10.1080/09603409.2016.1139306 33, (2), 154-163 (2016).

[17] A. Zieliński, G. Golański, M. Sroka, Kovove Mater. 54, (1), 61-70 (2016).

[18] M. Krupinski, B. Krupinska, K. Labisz, Z. Rdzawski, W. Borek, J. Therm. Anal. Calorim. 118, (2), 1361-1367 (2014).

[19] P. Duda, D. Rząsa, Int. J. Energ. Res. 36, (6), 703-709 (2012).

[20] L.A. Dobrzański, W. Sitek, M. Krupiński, J. Dobrzański, J. Mater. Process. Tech. 157, 102-106 (2004).

[21] A. Zieliński, M. Miczka, M. Sroka, Mater. Sci. Tech-Lond., 2016, DOI :10.1080/02670836.2016.1150242 (in press).

[22] P. Duda, Ł. Felkowski, J. Dobrzański, H. Purzyńska, Mater. High Temp. (2016), DOI : 10.1080/09603409.2015.1113021 (in press).

[23] X. Bai, J. Pan, G. Chen, J. Liu, J. Wang, T. Zhang, W. Tang, Mater. Sci. Tech-Lond. 30, (2), 205-210 (2014).

[24] J. Erneman, M. Schwind, H.-O. Andrén, J.-O. Nilsson, A. Wilson, J. Ǻgren, Acta Mater. 54, 67-76 (2006).

[25] PN-EN ISO 643: 2013-06, Micrographic determination of the apparent grain size.

[26] Y.Y. Fang, J. Zhao, N.X. Li, Acta Metall. Sinica. 46, 844-849 (2010).

[27] W.A.N.G. Bin, Z.C. LIU , S.C. Cheng, C.M. Liu, J.Z. Wang, J. Iron Steel Res. Int. 21, (8), 765-773 (2014).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 278 199 13
PDF Downloads 176 130 12