The main purpose of the investigations was to develop the phase composition of the composite assuming that the component selection criterion will be the formability of piston work surfaces during the machining. Wear resistance under the friction conditions was assumed as the additional parameter for the assessment of composite material. In the study were used AlSi7Mg/SiC+Cg and AlSi7Mg/SiC+GR hybrid composites prepared by the stir casting method.
 B. Mondal, S. Kundu, A.K. Lohar, B.C. Pai B.C, Materials Science and Engineering A 498, 37-41 (2008).
 L.A. Dobrzański, A. Włodarczyk, M. Adamiak, Journal of Materials Processing Technology 162-163, 27-32 (2005).
 G. O’Donnell, L. Looney, Materials Science and Engineering A 303, 292-301 (2001).
 A.J. Dolata, Archives of Metallurgy and Materials 59, 343-346 (2014).
 A. Boczkowska, P. Chabera, A.J. Dolata, M. Dyzia, R. Kozera, A. Oziębło: Solid State Phenomena 191, 57-66 (2012).
 A. Pasieka, Z. Konopka, Archives o f Foundry Engineering 13 (3), 64-67 (2013)
 Z. Górny, J. Sobczak, Metal matrix composites fabricated by the squeeze casting process, Transactions of the Foundry Research Institute (Ed.), 1995 Kraków
 S.V. Prasad, R. Asthana, Tribology Letters 17, 445-453 (2004).
 P. Mikkola, B. Willson, Metal casting design & Purchasing Nov/Dec, 31-35 (2014).
 J. Wieczorek, M. Dyzia, A.J. Dolata, Solid State Phenomena 191, 75-80 (2012).
 J. Sleziona, M. Dyzia, A. Dolata-Grosz, J. Wieczorek, PL Patent No. 391006-A1, Polish Patent Office, 2011.
 A. Dolata-Grosz, Solid State Phenomena 176, 55-62 (2011).
 A.J. Dolata, M. Dyzia, IOP Conf. Series: Materials Science and Engineering 35, DOI. 10.1088/1757-899X/35/1/012020 (2012).
 S. Boczkal, M. Lech-Grega, Project PBS1/B6/13/2012 annual report 1/2014 (2014).
 S. Boczkal, M. Lech-Grega, W. Szymański, M. Nowak, A.J. Dolata, 20th International Conference on Composite Materials Copenhagen, 19-24th July (2015), www http://iccm20.org/ fullpapers/file?f=BJk14rl76J.