The resultes of anodic oxide conversion coatings on wrought AZ61 magnesium alloy production are describe. The studies were conducted in a solution containing: KOH (80 g/l) and KF (300 g/l) using anodic current densities of 3, 5 and 10 A/dm2 and different process durations. The obtained coatings were examined under a microscope and corrosion tests were performed by electrochemical method. Based on these results, it was found that the low-voltage process produces coatings conferring improved corrosion resistance to the tested magnesium alloy.
 A. Stankiewicz, A. Laszczyńska, J. Winiarski, B. Szczygieł, Wybrane metody wytwarzania powłok ochronnych na magnezie i jego stopach, Ochrona przed korozją 53 (4-5) 2010.
 Y. Zhang, C.Yan, F. Wang, H.Lou, Study on the environmentally friendly anodizing of AZ 91D magnesium alloy, Chunan Cao, Surface & Coatings technology 161, 36-43 (2002).
 R.G. Rateick, Jr.1, Shen-Jiang Xia2, Viola I. Birss2, Sealing methods for enhanced corrosion protectionj of anodized magnesium alloy WE43A-T6, Magnesium Technology 2002.
 J.E. Gray, B. Luan, Protective coatings on magnesium and its alloys - a critical review, Journal of Alloys and Compounds 336, 88-113 (2002).
 C.S. Wu, Z. Zhang, F.H. Cao, L.J. Zhang, J.Q. Zhang, C.N. Cao, Study on the anodizing of AZ31 magnesium alloys in alkaline borate solutions, Applied Surface Science 253 ,3893-3898 (2007).
 El Mahallawy, N.A., Shoeib M.A., Abouelenain M.H., AZ 91 Magnesium Alloys: Anodizing of Using Environmental Friendly Electrolytes, Journal of Surface Engineered Materials and Advanced Technology 1, 62-72 (2011).
 Li W., Zhu L., Liu H., Preparation of hydrophobic anodic film on AZ 91D magnesium alloy in silicate solution containing silica sol, Surface & Coatings Technology 201, 2573-2577 (2006).
 B. Płonka, K. Remsak, M. Nowak, M. Lech-Grega, P. Korczak, A. Najder, Arch Metall Mater 59 377-383 (2014).
 B. Płonka, J. Kut, P. Korczak, M. Lech-Grega, M. Rajda, Arch Metall Mater 57 619-626 (2012).
 B. Płonka, M. Lech-Grega, K.Remsak, P. Korczak, A. Kłyszewski, Arch Metall Mater, 58, 127-132 (2013).
 B. Płonka, K. Remsak, P. Korczak, M. Lech-Grega, M. Rajda, Arch Metall Mater 60, 2967-2970 (2015).